Sök:

Sökresultat:

1111 Uppsatser om Permanent measurement bias - Sida 38 av 75

Kultur i förändring : En vidgad syn på kultursektorn och dess roll för samhället

How can you do a right measurement of culture as well as with other social sectors and with what can culture contribute when it comes to a town´s development? We found out that in Linköping the regional federation Ostsam recently (2005) started mapping the region's creative centers in order to look into the spreading of the culture in the county, and then use the uniqueness of the culture as an advantage in society- planning contexts. The reason was that both municipal - and State directions detected that the culture has a broader importance when it comes to building up society and infrastructure than earlier considered. This is called Cultural planning and is the foundation- method that Östsam used when working with their new projekt The creative sector. The outcome of the Östsam study resulted in an exciting study basis to work further on with and to examine through own demarcations and directions.This research manages the matter of the creative sector as an extension to the cultural sector.

Nischbanker - potentiella dynamikskapare

The banking industry is a fundamental part of the economy in Sweden. Despite its importance, the competition and the concentration level within the Swedish banking sector is relatively unexplored. This paper aims to examine the development of the concentration level in the Swedish banking sector during a period of ten years, 2003 to 2013. The examined banks in the study are the four largest banks in Sweden; Handelsbanken, Nordea, SEB and Swedbank, and four selected niche banks, ICA banken, Ikano Bank, Länförsäkringar Bank and Skandiabanken. In order to examine the development in percentage change, there are six selected variables; loans, deposits and borrowings (both public and households), net interest income and return on equity, which are observed during a period of ten years.

Interaction and barriers - the Big Four audit firms in the Öresund region

Uppsatsens syfte är att skapa en bättre förståelse kring samarbetet och rörligheten mellan var och en av de fyra stora revisionsfirmorna över sundet. Detta med ett huvudsakligt fokus på revision. Uppsatsens studie är kvalitativ och utförd med hjälp av intervjuer för att svara på forskningsfrågan; Hur samarbetar The Big Four över Öresund och upplever de någon rörlighet? Teorin om strategiska allianser, GATS modes och institutionell kontext utgör den teoretiska referensramen.Sammanlagt har åtta intervjuer utförts med respondenter på var och en av de fyra stora revisionsfirmorna på båda sidorna av sundet. Slutsatsen kan dras att där är ett tydligt samarbete inom var och en av de fyra stora revisionsfirmorna och den största fördelen av samarbetet är kunskapsöverföringen mellan kontoren i var och en av firmorna.

Den kombinerade effekten av query-expansion och query-strukturer på återvinningseffektiviteten i ett probabilistiskt system

This thesis deals with query formulation in full text retrieval. The variables studied were query expansion and query structur[INS: e :INS , and the aim of the thesis is to study their co-effects on retrieval performance in a probabilistic system. The expansion was made with synonyms, and the structure by expressing facets and phrases. The study was performed using QPA, Query Performance Analyzer, which includes InQuery retrieval system and a sub-collection of TREC documents with its topics. The measurement used was precision at 11 DCV points.

Positionering och kartuppbyggnad med avståndsmätande laser

This master thesis includes a description of how a number of sensors are put together in a sensor platform. It also gives a description of how localization and mapping has been performed with data collected from the sensor platform. Localization is a prerequisite for most of the tasks that can be requested from an autonomous mobile robot. In many situations the GPS signal is not available and hence an additional localization system is required. One approach is to apply localization based on landmarks extracted from the robots surrounding.

Familj eller karriär i arbetslivet, måste man välja? : -en uppsats om arbetstagares skydd mot diskriminering i arbetslivet.

Pregnant workers are considered at risk in the labor market and therefore need extra protection from employment discrimination . The purpose of this essay is to investigate what protection of pregnant workers against discrimination in employment situations and  if  there  is  no  corresponding  protection  for  female  workers  claim  the  right  to parental leave.The essay describes the national and EU rules on applications and practice, showing how pregnant women and workers on parental leave are treated in the labor market. Through Sweden's accession to the EU , we must apply the requirements nationally EU imposes on its member countries.The essay shows that pregnant employees have a strong legal protection from discrimination in employment , from both DL and by EU directives . Employers who deny workers employment because of pregnancy is guilty of direct discrimination on grounds of sex, because it is only women who may become pregnant. It is not important whether it is a temporary or permanent position .

Jämställd hörselvård : Teknisk hörselrehabilitering ur ett könsperspektiv

Idag finns få studier gällande könsskillnader inom hörselvården, däremot finns forskning inom andra vårdområden. Hörselvården består bland annat av rehabilitering, där den tekniska hörselrehabiliteringen är en stor del. Den innefattar främst utprovning av hörapparater och hörseltekniska hjälpmedel.    Syftet med denna studie är att undersöka om det finns några skillnader mellan män och kvinnor gällande den tekniska hörselrehabiliteringen.    Metoden för studien är kvantitativ och deskriptiv. En journalgenomgång inom ett enskilt landsting genomfördes. Totalt ingick patientjournaler för 56 personer i undersökningen.

Testplattform för nätverks-RTK i syfte att ge en rikstäckande GPS-tjänst med centimeternoggrannhet

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

Systematiskt arbete för att hantera osäkerheter vid mätning : vid Q-Med AB i Uppsala

This report is about helping Q-Med AB in Uppsala to start its implementation of uncertainty of measurements analyses in their manufacturing department. Prior to this, the company relied solely on personal experience or did not take this uncertainty into consideration at all during different kind of measurements, which means that some of the processes that the company previously believed were within specified acceptance limits, will actually fail when considering these sources of uncertainties.Q-Med AB needed some sort of instruction to help the company, in a systematic way, to investigate different types of disorders that are affecting all kinds of measurements. This instruction includes a short summary about measurements and uncertainty of measurements in general and a detailed procedure about how these uncertainties are going to be handled in their daily work.The goal was to be able to use this instruction to systematically locate, eliminate (when possible) and analyze all kinds of disorders when measuring. Q-Med is using a lot of different types of instruments when measuring different types of quantities, including temperature, mass, pressure and density. This instruction will hereafter be used for every instrument, regardless of quantity and type of instrument.The instruction is tested through 4 different kinds of measurements, for mass, temperature and humidity.

Saltvattenpåverkan i enskilda brunnar i kustnära områden : En undersökning av grundvattenförhållandena och riskerna för saltvattenpåverkan i S:t Annas skärgård, Östergötland

Coastal areas are popular for housing, both for permanent living and holiday houses. At the same time, thin sediments and small storage capacity in the bedrock makes the ground water resources limited. The limited ground water resources combined with too large withdrawals of ground water makes salt water intrusion a problem in many coastal areas. This study examine the risk of salt water intrusion in drinking water supplying wells on the island Södra Finnö in S:t Anna archipelago, Östergötland, Sweden. A calculation of the relation between ground water recharge and withdrawal is obtained to analyze the ground water balance in the area.

Mätning och styrning av prestationer i Trafikverket : En fallstudie av verksamhetsområdet Stora projekt

Många av de verktyg som används för mätning och styrning av prestationer i offentliga organisationer är hämtade från privat verksamhet. Dock har offentliga organisationer ofta andra typer av mål och styrning än privata företag, vilket försvårar måluppföljningen. Denna uppsats syftar till att få en förståelse av Trafikverkets användning av prestationsmätning samt tillämpning av mål- och resultatstyrning. Vidare kan studien ge ett bidrag till ökad kännedom kring hur mätning och styrning av prestationer sker inom en statlig organisation. I en fallstudie som innefattar intervjuer och dokumentgranskning studeras hur mätning och styrning av mål fungerar i Trafikverkets största investeringsverksamhet.

Implementering av forskningsprojektioner om havsnivåhöjning i kommunal planering : Gränsorganisationer som redskap vid riskkommunikation mellan forskning och praktik

Climate change and the sea level rise that it contributes to is an ever more pressing issue for costal municipalities around the world. Today there is a great deal of scientific reports and projections on what these changes could entail. However, resent studies on south Swedish costal municipalities have shown great discrepancies when it comes to how these scientific projections are implemented in the municipal planning and adaptation strategies. In an effort to understand the underlying reasons for this lack of concurrence, this paper has applied Rolf Lidskogs theory of the hetrogenity of science. The theory gives an explanation to the complications in the science-policy interface, by describing complicating factors in the communication between these actors.

Trafiken till Göteborgs södra skärgård - En annorlunda kollektivtrafik

Today?s wind power plants are only compensated for their reactive power consumption at no-load. As the wind power plants grow bigger the amount of reactive power they need also increases. This is no longer a problem that can be ignored, especially as the net owners are beginning to charge the reactive power they transport.In this thesis a couple of different methods of compensation and their prices will be discussed and evaluated. Problems, such as self-excitation, that can occur if one fully compensates the wind power plant will also be brought to surface.

ABC-kalylering i grossistföretag -modelldesign och effekter

Background: A large number of companies works as a link between manufacturers and final users. These companies buys and stores goods to be able to deliver when a need comes up later in the chain. The storage could have a negative effect on profitability and therefore places great demands on the management control systems. ABC as a method has been used with some success in manufacturing for over ten years. In wholesale companies the method is not frequently used.

Maskinduglighet på planlaserskärare

Lars Höglund AB is one of Scandinavia?s most qualified manufacturers of sheet metal products and provides custom designed products of very detailed precision. One of the main methods of manufacturing is laser cutting. When Lars Höglund AB signed up a new customer, with high demands in tolerances for the products, Lars Höglund AB thought it would be necessary to know the capability of the laser cutting machine. Also the process of how to retrieve this capability was interesting. The capability will be researched for the following elements: Cutting right angles in squares with a corner radius of 1 mmCutting corners which are not right angleCutting of circles with constant radius Measurements were made on 150 pieces of sheet metal details, which had been cut out by the machine.  The data from the measurements where later used to study the capability.

<- Föregående sida 38 Nästa sida ->