Vertical jumping ability is an essential skill in many sports. The aim of this study wasto investigate the acute effects of assisted jumps on subsequent countermovementjump (CMJ) performance by female athletes. Nine healthy, trained female subjectsvolunteered to participate in the study. In a randomized order, they performed oneregular warm up protocol before testing their CMJ baseline value, and one warm upprotocol with an addition of five assisted jumps at 30% body weight reduction beforeanother CMJ test. Elastic cords attached to an overhead pulley system and to aharness around the subjects' upper body were used to reduce the body weight.Significant improvements were noted in jump height, 2.3 cm (7%), positive forceimpulse, 4.7 Ns (2%), vertical take off velocity, 0.1 m/s (3%), countermovement time,0.1 s (12%) and breaking time, 0.1 s (14%), p.

The aim of the thesis is to analyse and understand resolution, repeatability and reproducibility of the measurement system for package distance. The measurement system for package distance is already in use, no Gage R&R has been performed on the system and before spreading use of the system the quality of the system has to be understood and approved.

The objective of this study has been to examine which significant values are of importance in the telecom sector today, and in a continuing perspective yet to be. To ensure the factors of relevance in the study, we have identified three purposes: - Our first purpose is to clarify the eminent values in the competitive market of the mobile phone operators today, and the reason for its importance.- The second purpose is to understand the function of the brand regarding to value creation and loyalty in the sector of mobile phone operators.- The third purpose is to explore the potential approaches for mobile phone operators to increase value.In this study, our approach has been a qualitative methodology by conducting seven interviews with respondents related to the telecommunication sector.As a result of the process, we find the need to divide the concept of value into two dimensions, which we entitle organizational related values and customer related values. We have found the values related to the characteristics of the market in aspects of its infrastructural features but also in regards to the homogenous core service.Our findings in the empirical data with support to our theoretical frame of reference, is the current highly important organizational related value of constant high result quality (well-functional technological aspect), and the value enhancer by a low price; the strategy of bundling also results in higher value. This result in customer related values that perceives as safeness, availableness and convenience. The brands are a significant source of customer related values with identity value, image value and assuredness. A continued advancement in process quality and individualization will imply greater customer related values of closeness, freedom and flexibility. .

Bakgrund och problemdiskussion: Intressenter st?ller h?ga krav p? f?retag g?llande milj?m?ssig h?llbarhet, vilket f?retag beh?ver anpassa sig till. F?retag samlar in information f?r h?llbarhetsrapporter och samma information kan anv?ndas f?r interna milj?m?ssiga prestationsm?tt. D?remot beh?ver f?retag anpassa m?tten f?r att de ska se milj?p?verkan p? detaljniv? f?r prestationsutveckling.

This report is an attempt to clarify how religious and non-religious views-of-life [livsåskådningar] are created through the collaboration and opposition of religious and scientific elements/ideas. This with the hope of reaching a fruitful result related to the solution of world-view related conflicts, such as the ones existing between science and religion, on an individual and societal level.This is accomplished with the help of two assertions: (1) Mankind has a need to explain its existence and surroundings. (2) Religion and science has their origins in the same seed and aim to serve the same purpose, or function. Together these two assertions lay the theoretical foundations of this report which implies that all humans have an innate need of sustaining a stable world-view.The result of this report is that a final solution to world-view related conflicts are beyond reach as our mental and physical nature limits us. However there are strategies for minimizing world-view related conflicts effect on society..

This report is about Swedish statistics on work related accidents and work related diseases onboard Swedish ships. The authors analyzed collected statistics from two authorities and an insurance organization in an attempt to compare the data. In order to understand the need for statistics and why the authority publishes them; minor literature study was conducted. The results of the literature study are in the background chapter. The requirements for the different cases to be registered in the statistics have been investigated, in unity with the issue in question.

Navtech är en internationell leverantör av flygoperationella produkter. Det här examensarbetet utfördes på en av deras produktionsavdelning som kallas Aircraft Performance, i Stockholm. Arbetet består av framtagning av en manual till en mjukvaruprodukt. Produkten är ett program som beräknar och presenterar flygprestandainformation för start och landning. Programmet tillhandahålls med två användarmanualer, Userguide och Prepages.

This Bachelor?s thesis is related to the area within library and information studies that focuses on information seeking and information practices. The study deals with how politically engaged young people seek information in relation to their political interests. The purpose of the study is to create an understanding of the roles that different forms of information-related activities play within the framework of political interest and of the feelings, experiences and challenges that such activities may give rise to for those involved. The study also discusses purposes and motivation for information seeking and use in political engagement.

Tomo Hugglink (TOMO Skog) is an innovation for harvest and transport of biofuels. The system consists of a truck, a chipping unit and crane mounted on a link and a wood chip trailer. The system works in such a way that the chipping unit is disconnected and placed on the site and wood chips are loaded directly into the wood chip trailer.The aim of this study was:- To examine the performance of the TOMO Hugglink system under different conditions such as the size, placement and quality of the pile.- To calculate the cost per raw ton for two vehicle combinations at different transport distances and to examine the effect of a reduction in set-up time and an increase in load weight.- To identify possible improvements with the TOMO Hugglink system.A time study was conducted within the thesis work to make it possible to determine production and time consumption. In the subsequent economic analysis the cost per tone at different transport distances was calculated for two different lorry concepts. Furthermore the effect of a reduction in set-up time and an increase in load weight was calculated.Under current conditions the utilization of the chipper is low and only 29 % of the total system time is occupied by chipping.

District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

This essay concerns dance as an exhibition object by examining the permanent exhibition at The Museum of Dance in Stockholm, Dansmuseet. Due to its dependence on the temporality and movement of the lived body, dance does not easily lend itself to being exhibited in a traditional exhibition display; and since the live dance performance itself is ostensibly absent at the exhibition display, other means of representation must be relied upon in order to evoke the exhibition visitors? experiences of time and movement as well as the feeling of dance. Starting from a phenomenological first-person perspective, as an exhibition visitor, I present three ways in which such experiences may come about. The cross-section of the experience evoked and the means that trigger them are intermedial, spatial, and performative taking their departure in the visitor?s pre-understanding of dance..

The thesis main objective is to establish the determinants for granting executive stock options and to examine their impact on performance for firms listed on OMXS30. The analysis is based on accounting data gathered from annual reports and Thomson Datastream. The empirical results display that firms grant stock options to mitigate the principal-agent problem. Furthermore, risk proves to be positively significant with executive stock options, implying that either executives increase the level of risk after being granted stock options or influence the decision of the remuneration towards stock options when the firm increase the level of risk, in purpose to boost the expected value of their options. No relation between executive stock options and firm performance could be established..

As a result of global competition, companies within the automotive industry are required to improve their production systems to achieve sustainable and competitive production. To attain operational excellence, companies have adopted concepts like lean and World Class Manufacturing (WCM).In order to deliver, companies need to increase the availability and reliability of production equipment. This demands focus on both operational and strategic maintenance, and efficient equipment acquisition and management. The main objective of this thesis is to identify processes and success factors that are necessary for improved maintenance performance. By conducting a case study and by performing a literature review, the following has been studied: 1) how companies within the automotive industry work with maintenance and maintenance strategies, 2) implementation of maintenance strategies, and 3) new acquisition and spare parts management for maintenance. The results show that basic maintenance concepts and related terms are well defined in the literature.

The purpose of this paper was to gain knowledge about the conversation about developmental opportunities in the organization, and how a company uses it. The focus was on four different themes, purpose of the conversation about developmental opportunities in the organization, planning, execution and content, feedback. The sample consisted of six people, three employees and three managers of the company. The interviews were conducted by an interview guide, one for the employees and one for the managers. The results of the interviews showed that the conversation about developmental opportunities in the organization was used by managers to make all employees to strive in the same direction, an opportunity for employees to reconcile how their work performance is perceived by their managers, the use of a preparation model differs between managers and feedback was important.

The main purpose in this degree thesis is to investigate changes in performance when introducing a newly produced Real-Time database in one of CC Systems products, the Diagnostic Runtime Engine, DRE. The thesis is a collaboration between CC Systems, creator of DRE, and Mimer AB, developer of the Real-Time database.The result reveals that the time spent on database access is considerably lesscompared to the originally used database. The research has lead to several additional requirements on the real-time database and these are presented as part of the result in this thesis. The additional features will help making the product more suitable for DRE and similar applications.Additional research is required to be able to recommend the use of this product or not. Primarily the performance in another operating system, Windows CE, but also the introduction of additional features should be investigated.