The system tungsten-oxygen has potential of being suitable for decorative coatings since ceramic coatings are often hard and wear resistant, and since modulations in oxygen content or incorporation of small ions could give bright colours. The aim of this report was to investigate the relationship between process parameters and  the properties of the films, with the wear resistance being of special interest.Samples with tungsten to oxygen ratios in the range of 100:0 to 25:75 at% were made using reactive sputter deposition, either with constant gas flow, or gas flow controlled by optical emission of the plasma. The hysteresis of the system, which means that a certain gas flow will cause different pressure and/or target voltage depending on in what way the flow is reached, makes it interesting to control the process where the system makes the steep change from metallic tungsten to ceramic tungsten oxide. This is difficult and thus requires precise control equipment.The samples were analysed using X-ray diffraction, X-ray photoelectron spectroscopy and an empirical wear test suitable for small components like cell phone cover for example, in order to characterize the structure, composition and wear resistance of the coatings. The results could be divided into three groups: (I) tungsten-like, with very low oxygen content; (II) mixed phase and (III) tungsten oxide like, with oxygen content close to 75 at%.

Background: In the past 10 years private label has increased significantly in the Swedish grocery market. This is an important strategic event, which is a great challenge to suppliers as it causes stiff competition. To handle this situation an increasing number of suppliers have to make the decision whether to produce private label or not.Purpose: The purpose of this study is to find and analyse factors that influence suppliers in the Swedish grocery market to produce private label. On this basis we intend to confirm or develop existing theories within the field of study.Research method: The study has a qualitative approach where empirical data has been gathered through interviews with suppliers and retailers in the Swedish grocery market.Results: This study has identified factors that underlie suppliers? decision to produce private label.

In the western world, strokes are the third most common cause of death, hitting mainly the elderly population. Smoking, high blood pressure, diabetes and overweight are known risk factors for causing strokes. Previous studies show that an increased level of particulate matter, PM, is also related to an increased number of strokes. The population in this study consists of patients over 65 years old who live in Malmö. Levels of particulate matter were measured from October 2004 to April 2005 at a central outdoor monitoring site in Malmö.

Introduktion: Sekretorisk media otit (SOM) är den vanligaste öronsjukdomen och uppkommer oftast i efterförloppet till akut media otit (AOM). Om barnet får SOM leder det till hörselnedsättning som kan påverka språklig utveckling och ge beteendeproblem. Etiologin bakom SOM anses vara multifaktoriell. Barnets tryck i mellanörat kan påverkas vid flaskmatning. Allergier, bakteriella/virus infektioner och inflammationer har också betydelse för utvecklandet av SOM.

Rapid Granulator is one of the world's largest producers of granulators, which is a kind of grinderwho grinds discarded plastics to granules which later can be reused when pressure molding plastics.The company wanted help in developing a new, or alternatively extending their previous,measurement equipment. The old equipment was hard to use, required changes in the code fordifferent measurement scenarios and had a limited array of measuring quantities. Rapid had an ideaof a similar concept only with a greater number of input ports, better range of applicable sensors andan advanced yet easy to use interface. The system is supposed to be placed at Rapid's test departmentwhere it will be used as a tool for finding faults and provide data which can be used for furtherdevelopment of the granulators.The project's members accepted the task and immediately began searching for suitable componentsfor the system. After the search was completed a list of costs, limitations, sensors, I/O's anddevelopment environment was presented to Rapid's staff.

Bakgrund och problem: Dagens företag verkar i en osäker och dynamisk miljö där marknaden ställer allt högre krav på snabba förändringar och anpassningar till kundernas behov. För att möta denna dynamiska omgivning har en rad nya produktionsfilosofier introducerats. En av dessa som fått stor uppmärksamhet och vars användning ökat är lean.Under senare år har det kommit att riktas stark kritik mot tillämpningen av traditionell ekonomistyrning och att denna kan vara skadlig vid tillämpningen vid lean. Andra forskare tar det steget längre och ställer sig frågan om det finns någon plats för ekonomistyrningen vid operationella koncept.Som ett svar på ovanstående kritik introducerades lean accounting, ett ämne som fortfarande är hårt debatterat inom managementlitteraturen. Andra forskare skiljer här på lean accounting och lean control, där lean control fokuserar på output, behavioral samt social control.

Background Atelectasis is a commun respiratory complication related to general anesthesia and may contribute to pneumonia and acute respiratory failure. Atelectasis apear within 10 minutes after anesthetization and occur in 90% or more anesthezied patients regardless of age and gender. The aim of this study was to indentify if there are any evidence for which methods are ultimate or are most efficacious to reduce and prevent the formation of atelectasis.                                                                                                          Methods This study is a descriptive litterature study where 28 scientific studies have been indentified for review and analysis.                                                                                                               ResultsThe use of 100% oxygen during the induction of anesthesia favors the developement of atelectasis. This can be prevented by preoxygenation with oxygen content of 100% combined with a PEEP of 6-10 cmH2O. When free airway is secured, oxygenation with 100% was found to be unnecessary.

This report deals with an exam report written by Olle Hjalmarsson and Thomas Likar, students at Högskolan i Halmstad. The project was carried out for Haldex Traction AB in Landskrona whose business consist of manufacturing automatic all wheel drive systems (AWD-system). These systems consist of a plate clutch which activates all four wheels of a 4-wheel driven vehicle. An important component in these clutches is the accumulator which basically consists of a piston under the load of a spring which creates an oil pressure with the help of an electric motor used for actuating the clutch.At Haldex difficulties has been experienced regarding the assembly of the accumulator parts due to the small tolerances between the piston and the hole of the accumulator in the cast aluminium housing. Attempts have been made to assemble the parts in existing robot cells.

Syfte: Var att beskriva vilka faktorer som påverkar sjuksköterskans tillämpning av evidensbaserad kunskap om trycksår i omvårdnaden.Metod: Litteraturstudie med deskriptiv design, utfördes utifrån två kvalitativa, sju kvantitativa samt en vetenskaplig artikel med en kombination av ansatser. Vetenskapliga artiklar publicerade mellan åren 2002 till 2012 söktes i databasen Cinahl.Resultat: Sjuksköterskans tillämpning av evidensbaserad kunskap i omvårdanden av trycksår, påverkades av attityder, kunskapsnivå samt den organisatoriska struktur som råder på arbetsplatsen. Sjuksköterskan som medverkat i special utformad utbildning eller som arbetar aktivt med kvalitetsförbättringsarbete har uppvisat en förbättrad kunskapsnivå. Vilket tillsammans med en positiv attityd medför en god förutsättning till en förbättrad följsamhet, gällande tillämpning av evidensbaserad kunskap i omvårdnaden av trycksår. Dock förekommer bristfällig, inadekvat såväl som föråldrad kunskap hos en mindre population sjuksköterskor.

Purpose: The study aims to analyze how companies can learn from past communications in critical situations and during corporate crisis, and see how they use this knowledge in the management of subsequent critical situations and corporate crisis. Furthermore, the media is analyzed to see how the newspaper industry chooses to reflect an organization and its actions, and also to see if the pressure through articles in the newspapers has an impact on the extent of the situation.Method: A qualitative case study of Sweden?s largest food company, ICA Sverige AB, where knowledgeable people in media management within the company are interviewed using semi-structured interviews, with support of quantitative methods by a collection of articles from the news press.Theories: Concepts, theories and models in crisis management and communication has been applied to relevant data. These comprise Knowledge Management, a communication template in crisis management, The Situational Crisis Communication Theory (SCCT) and the model Content of crisis communication.Empiric: Based on the quantitative data consisting of articles from four Swedish news sources: Svenska Dagbladet, Dagens Nyheter, Aftonbladet and Expressen, a semi-structured interview guide was created and carried out with the person within ICA who possesses knowledge of the subject area.Conclusion: ICA has during the priod studied exhibited to have used the concept of Knowledge Management in the development of their routines regarding product recalls at product defects. The relationships between ICA and the media have shown improvements, which has resulted in ICA percieve the media coverage as balanced, true and fair..

How schools handles threat and violence among pupils could have an effect on the surrounding world, since schools reflect society at large. This study attempts to explore how this is handled within two schools, one secondary school and one upper secondary school. How do the schools work with violence and threats amongst pupils? Who is responsible for what? Is this work based on school guidelines? Why/why not? The theoretical starting-points have been Lundquists implementation-based control-model and an organizational point-of-view using theories about open and closed systems, primarily Meyer and Rowans neo-institutionalism. To gain validity, the study has been carried out by way of triangulation, i.e.

ABSTRACT Introduction: One of the great difficulties that the nurse anesthetist encounter in their profession is to assess and estimate sleep depth versus signs of pain in the anesthetized patient. Based on a pre-operative appointment and the perioperative monitoring, an assessment of the patient is made. The experience that the nurse anesthetist has can make it easier to understand what subtile signs of the patient depends on. Purpose: With this in mind, the purpose of the pilot study was to try to find out if there are specific signs of pain during anesthesia and if the professional experience played a role. As a subsidiary aim the authors examined whether there were factors in the patient that the nurse anesthetist takes into account in the identification of pain during anesthesia.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

Introduction: The number of hearing impairments in Sweden is increasing. The largest increase is seen in ages 25-44. There are reasons to believe that these impairments are noise induced. Leisure time noise is not controlled in the same manner that industrial noise is. An ongoing conflict between city council officials and rock club owners, musicians and music event organizers about sound levels at smaller live music clubs exceeding the national sound level restrictions created the need for an acoustic intervention project.