Operators and Internet service providers invest in broadband to be able to deliver new services that require higher data transmission rate. A way to make this possible is to use ADSL, Asymmetric Digital Subscriber Line, as the access technology. To be able to handle this technology, the service providers should do a pre-qualification. Methods and tools are needed to analyze the local copper lines and decide if these qualify for ADSL with respect to service availability and possible bandwidth through the lines. This report brings up some methods for pre-qualification of ADSL, the important quality parameters and how to gather them from the available services today.

Leaders have many tools in their toolbox when it comes to managing their firms, assuring that they are moving in the right direction. One of these tools is vision. Vision can be a powerful tool for steering a company. But to be able to use it fully, you must also understand how vision is best conveyed to employees and followers. If you understand the vision as a tool, you can fully utilize it.

This thesis work is made by Torbjörn Johansson on Karlstad University for Uddeholms AB. The assignment in this thesis work was to investigate tough cutting in three different tool steels: Vanadis 4 Extra, Vancron 40 and Sverker 21. The research was to compare the wear of the tool after cutting in each one of the tool steel alloys. The research was also made to see if the tool cutting in Vancron 40 has a better wear than the tool cutting in Vanadis 4 Extra and also compare the results with Sverker 21. All three of these alloys are a part of Uddeholms AB:s range of products, and is used in applications like forming tools and knife tools. Vancron 40 is a powder steel with a very good combination of mechanical properties like ductility, adhesive strength and hardness.

This study is preformed at Westbaltic Components placed in Töcksfors Sweden. Themain target in this study is to make one of the company?s assembly lines better andmore effective. The assembly line constructs vending machines for different stores allover Europe.It will contain tobacco, snuff, cigarettes and shaving blades and many more similarproducts.The first step in our study is to locate the daily problems and find out a good way toreduce them and make them disappear. A good way to do this job easier was toconstruct a visualizing board.

To increase the quality in their products ABB is working towards a cleared order concept. That means that all customer specified options are to be known before they start with order calculations and construction. As it is today they use paper checklists to achieve this. One order may have several reactors, and for a reactor there can be several different alternatives. For each alternative a new checklist must be filled out.As of today all reading of the customer specification and checklist fill in with is done by hand by different persons, and sometimes the same data is read more than one time.

The aim of this master thesis is to examine the opinions of the students of Linköping University regarding the role of the university library in their learning process. The study addresses the student?s expectations and satisfaction regarding the library services. The questions we seek to answer are: What are the students? conceptions of Linköping University Library as a part of their learning process? What expectations do the students have regarding Linköping University Library? Does the library fulfil the students? expectations? In what way has the library?s pedagogical ambition reached the students? What are the students? opinions about the user education? The study is based on a web survey complemented with interviews.

Numerous studies have showed that Swedish municipalities are responsible for several of the activities that concern children and their rights, e.g. school and health care. Furthermore, the Convention of the Rights of the Child is an international agreement that Sweden has signed and ratified which also implies the obligations that Swedish municipalities have. The purpose of this study is to investigate and compare, from a social justice perspective, how children?s rights are being emphasized and how children?s opinions are being taken into consideration at the municipality level in Sweden.

Abstract During object-oriented system development, programming should be preceded by analysis and design to assure that the system fulfils the demands of the customer and simplify during the development phase and documentation. When modeling the analysis and design phases, several different notations may be used. One of these is the UML (Unified Modeling Language) which this thesis will cover. The aim is to compare the use of the UML i practice versus what is said in the literature. The investigation is built upon interviews at different companies to receive their reflections about the UML.

?Childs pedagogic material ? A qualitative study of child?s use of pedagogic materials available at five nursery schools and about their teachers thoughts about the display of the pedagogic material?In the nursery preschool the environment and the educational materials have always had a central place. That's why it has been chosen to study and observe five preschools and interview sex teachers, in an attempt to understand the teachers thought about the choice of material and the choices of material that the children used. The reason I do this is to see what the underlying idea about the materials the children use is, and why educators choose to make certain materials visible. The purpose of this study is to examine the educational materials that are used to stimulate children´s learning and examine what determines the choice of educational materials.

During the past decade Information Technology (IT) and Information and Communication Technology (ICT) have become the main tools in teaching. Authors and early educators who are treated in the study talks about how technology has come to change the school's approach to teaching and didactic tools. The technology has also affected students´ and teachers´ ways to work because the technology's versatility makes demands on the user's expertise and competence. The technical skills have long been associated as a male domain, where men are expected to master the technology´s versatility. These expectations are not the same for women.

Digitala läromedel blir ett vanligare inslag i skolgången då ny teknologi erbjuder tidigare okända pedagogiska möjligheter. Denna uppsats undersöker hur elever som använder ett digitalt läromedel i form av en virtuell lärmiljö för matematiklärande upplever denna lärmiljö. Dessutom undersöks elevernas prestation i lärmiljöns matematiska uppgifter. Skillnader mellan elever i olika årskurser samt elever som är matematiskt låg- eller högpresterande studeras. Matematisk prestation beskrivs utifrån Goods (1981) passivitetsmodell som innebär att lågpresterande elever är mindre risktagande i klassrumsmiljön.Elevernas upplevelse av digitala läromedel studerades i en virtuell lärmiljö bestående av två moduler, en spelmodul och en modul för skriven dialog.

The purpose of this Master?s thesis is to investigate what prompts student nurses to seek information required to their educational tasks and how they evaluate and utilize that information. The questions addressed in this thesis regard how information retrieval becomes part of student nurses? social practice; which physical and intellectual tools student nurses make use of in their education; and which mediating resources they use to perform their tasks. Roger Säljö?s sociocultural approach provides the theoretical framework for this thesis.

Eco-design is all about improving products environmental performances throughout the products lifecycle by including the environmental aspect into the product development process. There are a large number of different tools that can be used for this, but there are several factors that can affect which one will be the best to use. Some tools for eco-design takes comprehensive studies and can only be performed by experts, while some tools can be used more time- and cost efficient and with basic knowledge. The choice of tool should be based on the company?s situation.This report describes the research of how the design and furniture company Blå Station could include a tool for eco-design in their product development process.

The purpose of this graduate work is to seek knowledge about how children?s right to participation and influence is interpreted and understood in a specific context and also to examine how this right can be conditioned and shaped by the pedagogical practice of early childhood education.The focus of this study has been to examine the arguments and attitudes towards the right to participation and influence as a pedagogical practice as it is understood in early childhood education. Additionally, I have been interested in studying the affordances and restrictions that early childhood educators experience when dealing with children´s right to participation and influence.The platform used for data collection is Facebook and the informants recruited were active participants in forums regarding democracy in preschool education. In the second phase of the study I conducted online focus groups with these participants.For the analysis of the material I have adopted a poststructuralist perspective, starting from Jaques Derridas philosophical texts and use of deconstruction.The results show the complexity in early childhood education´s democratic mission. What becomes clear is the importance for the teachers to adopting an open, ethical and democratic approach in order to make children´s right to participation and genuine influence possible in the everyday reality of early childhood education. .

The title of the paper aims at a comment by one of the students during an interview. It reflects how most of the students experience the lunches in a specific school where the investigation is made. The question of pedagogical lunches has always interested me. Here I have used a method called the Grounded theory. I carried out a qualitative investigation with a number of methods such as interviews and participating observations.