This study will identify the environmental impact in terms of carbon dioxide for a boiler house on behalf of Kvänum energi. The boiler central consists of a main building, which in turn contains multiple components such as boilers, pipes, etc, the boiler central uses pellets fuel. It also includes a silo and an ash container. The total weight of the boiler is about 63 tons. Each boiler has an output of 600 kW; the central includes three boilers with room for a fourth if necessary.

In offshore oil production FMC Subsea systems use a product called cap. The cap´s mainly task is to protect hubface and seal areas on inboard hub against dirt, corrosion and mechanical damage under installation of a subsea system. A new model of a cap has been designed and analysed using finite element method. The model is called KC3-12 and has a new function, emergency release, which is a backup method for the ROV (remote operated vehicle) to release the cap from the hubface when it is placed under water. The cap KC3-12 was found to fulfil the criteria under the test load pressure, according to ASME VIII, div2.

The aim of this master thesis was to create a dynamic model for the processes in a solid fuel boiler of the moving grate type. Another aim with the model was to keep it as simple as possible but still able to catch the dynamics of the processes in the bedplate of the boiler. The creation of the model had its origin from drying and combustion equations used in earlier modeling work of boilers. The represented model has been used to simulate different kinds of disturbances in a boiler and different ways to control the boiler. These tests show that controlling a number of parameters in the bed of the boiler is an effective way to keep the grate stable during disturbances.

This thesis aims to contribute to improved functional procurement of photovoltaic systems, PV systems. Functional procurement means that criteria concerning a function are set rather than specifying technical details or products. Possible advantages and difficulties in using functional procurement have been analyzed by interviews, simulations and a case study. Electricity production and surplus production for different scenarios have been simulated via MATLAB. The MATLAB script was also used to generate rules of thumb on feasible solar fraction for six different load profiles; a church, a farm, a car mechanic, an office, an industry and an apartment building.

This master thesis covers the development of an automatic tuning process for the existing speed controller for drive systems. The drive systems are resonant two-mass systems where a motor is used to drive a load connected by a shaft. The developed method relies heavily on system identification and the construction of a complete mechanical model of the process. With this approach, the common problem with poor load speed control that derives from measuring only the motor speed can be addressed and solved for a majority of such processes.The automatic tuning method has along with general test functions been implemented in a complete tool for automatic tuning, testing and performance evaluation and reporting for drive systems..

To be able to move around without having to think about each movement is for most people amatter of course. Todays society contributes to a life at high speed where the sparetime is oftenspend doing somekind of sport, even extreme sports which earlier only a few people wheredoing. This leads to not only good health effects but also to more injuries. One of the mostcommon injuries is the knee injury.Capio Artro Clinic is a clinic specialized in sports medicine and particulary patients with injuriesin knee, shoulder, foot, hip or elbow. They perform a great part of all the crucial ligamentsurgeries in Sweden and has therefor also a lot of patients in need for rehabilitation of the knee.During the rehabilitation the load of the injuried knee is increased in steps.

From the mid 19th century to the early 20th century about 1.2 million Swedes left Sweden for a new life in America. Three parishes in Örebro län is at the centre of the research of this essay. The time span of this essay ranges from 1856-1915, divided into three periods; 1856-1870, 1881-1895 and 1901-1915. The main objective has been to compare the three parishes with each other, with Örebro län and with Sweden. What I have wanted to examine has been the following: How many people from each parish emigrated during each period? How many were men, women and children up to the age of 15? In the analysis part of the essay the results were compared parish with parish, and with Örebro län and Sweden.The analysis showed that the emigration of three parishes is commensurate with the Swedish emigration history.

From the mid 19th century to the early 20th century about 1.2 million Swedes left Sweden for a new life in America. Three parishes in Örebro län is at the centre of the research of this essay. The time span of this essay ranges from 1856-1915, divided into three periods; 1856-1870, 1881-1895 and 1901-1915. The main objective has been to compare the three parishes with each other, with Örebro län and with Sweden. What I have wanted to examine has been the following: How many people from each parish emigrated during each period? How many were men, women and children up to the age of 15? In the analysis part of the essay the results were compared parish with parish, and with Örebro län and Sweden.

For systems with multicore processors contention for shared resources is a problem that occurs when several memory-intensive processes are executed in parallel within the same memory domain. This contention has a direct influence on the performance of the system and is a complex problem that has been recognized for a long time. An attractive and actively studied way to minimize this problem is by using a process scheduler adapted to allocate processor cores in a way such that contention for shared resources is minimized.With the introduction of multicore NUMA-systems (Non-Uniform Memory Access) the situation has become even more complex. In these systems the access time for processor cores to different memory domains vary depending on factors such as distance and load. Thus, the process scheduler also has to consider where the memory of each process is placed to minimize the distance and balance the load on each memory domain.This report presents a user-level process scheduler for a NUMA-system based on the multicore processor Tilera TILEPro64.

The Anybus CompactCom modules are today using the Anybus NP30 processor. These modules are used for communication between industrial machines and larger network protocols. The communication loads on these systems are increasing every day and the limiting factor for the system is the processor.HMS, the company that develops the Anybus CompactCom, has shown interest for a benchmark test between the old processor and a new processor, ARM Cortex-M3. This project includes that benchmark. To be able to get results that reflect reality a test environment was created to simulate Anybus CompactCom conditions.

The aim of this present study was to determine and evaluate whether the presence of brooktrout (Salvelinus fontinalis) and sediment load may be a threat against the reproduction anddistribution of freshwater pearl mussel (Margaritifera margaritifera) in a creek located innorthern Sweden. Freshwater pearl mussel is an endangered species and is dependent ofbrown trout (Salmo trutta) to reproduce. Therefore there are concerns of indirect effects onthe population of pearl mussel by competition between brown trout and brook trout. Ditchesfrom a nearby gravel road have been fixed to lower the sediment load into the creek. I tried toevaluate this action plan.

The project focus on combustion of softwood pellets and pellets in a 40 kW grate fire reactor at TEC-Lab. Dept Applied Physics and Electronics at Umeå University. Experiments were performed at four primary airs to fuel ratios (0.7 to 1.3), where aspects such as temperature profile, levels of gases (CO and NO), sintering-/-slagging and unburned fraction of the ashes were studied. Four different fuel loads were used for wood pellets (10, 20 and 30 kW) and one fuel load for straw (10 kW). Combustion of straw proved very difficult to ignite, and also led to other combustion-related technical problem such as slag formation due to the relatively low melting temperature-/-slag temperature of the straw.

In this project forging of aluminum alloy Al 6026 T9 has been performed in the temperature range of 400 °C ? 470 °C. The alloy which was in the shape of a cylindrical billet was formed in a press with the aim of analyzing the effect of different forging temperatures and required press load for optimal die filling. The component?s dimensions were later measured and compared to a reference piece.

When farm animals are transported there are several factors that can affect their welfare. If the vehicle has an accident the welfare of the animals transported will probably be compromised. The aim of this study was to make a survey of accidents with animal transportation vehicles in Sweden. The survey included the number of accidents from January 2000 to May 2014, the cause of the accidents and how the animal welfare was affected by the accident. The authorities which were likely to have reports about accidents involving animal transports were contacted. There were no collected records about transportation accidents and the authorities referred to eachother for information.

Wastewater contains biodegradable materials, which are often measured as BOD7.Trickling filters are sometimes used as a purification step for BOD-reduction. Atrickling filter is a tower, which is filled with a carrier material. Microorganisms growon the carrier material in the form of a biofilm. This biofilm consists mostly of bacteriathat purify water from BOD.In Älgarås? wastewater treatment plant the water is purified by a trickling filter.However the treatment plant has difficulties reaching the emission requirements forBOD.