Increased competition in the IT industry has sparked a need for developing faster innovation processes with more predictable output. One of the biggest issues when it comes to achieving a faster flow through the innovation process lies in managing its high degree of variation. Proposing a solution to this problem, Lean Software Development (LSD), was developed to provide a framework for how IT companies should organize its software development process to achieve increased speed and quality. This study examines to which extent LSD, as a set of values, principles, methods and tools, can be used to improve flow efficiency in the innovation process. A case study of a multinational IT company was made by conducting ten semi-structured interviews with current employees.

AbstractEmbla 5 is an office building which has done a large improvement. The clients of this building has made an order of WSP and the student Anders Kempe to calculate the use of energy for the building, and after that result proposing further measures which can decrease the energy use of Embla 5.The ground for this report is when calculation of the present energy use of the building is stated. To make that information of a number of parameters such as envelope, the heating system and ventilation has been located and set in to the simulation program IDA ICE which calculate the energy use.To improve the energy use further this project has been concentrated to change the system of ventilation. Today the ventilation system is of the kind CAV (constant air volume) and the air flow is dimensioned for after recommendations from BBR and Arbetsmiljöverket in the office spaces. Consider that Embla 5  is an office building where the people only staying for 8-10 hours/day so was the ide to see how much energy saving if the air flow is reduced the time people not being in the building.

The content of the following report is the summarized result of three students thesis at Blekinge Institute of Technology in co-operation with Water Jet Sweden AB. This report will give the reader a description of principles how to measure the abrasive mass flow in a waterjet cutting system. The work began with a visit to Water Jet Sweden AB to get a closer look at the problem. When the analysis of the problem was done the criteria were defined in the form of demands and desires. The main task of the criteria was to guide the search for the solution.

For a woman who has been diagnosed with breast cancer, there can be many negative things that effects her life. It is a great shock that changes her life and can include a sense of lost femininity and a decreased sexual desire which can be both physical and psychological. The basis of this literature review is from 17 scientific articles which evaluate the changes in cancer patient's body image and sexuality during their illness and treatment. This study illustrates patient's experience of the nursing and difficulties which obstructs the nurse from talking about sexuality whit the patient. The study also showed that the patient had a desire to discuss these sexuality issues with a nurse..

Previous research and patient complaints to the Swedish Patient Support Committee shows that there is a lack of substance in the patient-nurse relationship. This may suggest that it can be difficult for health care to live up to health-care law which requires it to be of good quality, based on dignity and respect and designed so that the patient is an active participant and can make their own decisions when it comes to their health care. For a better understanding of what a dignified patient-nurse relationship is, this study aims to clarify what the patient values as good patient-nurse relationship and describe how they have experienced the patient-nurse relationship during their stay at an emergency care department. The study is a descriptive cross-sectional study with a quantitative approach, where the population consisted of patients who were cared for at an emergency care department in the County of Västmanland, Sweden during 2007. The sample consisted of 93 patients which were asked to answer a questionnaire.

Postoperativ smärta är en smärta som är förväntad av både patient och sjuksköterska. Mötetmellan sjuksköterska och patient med postoperativ smärta innefattar sjuksköterskans kunskap och fördomar om smärta, samt patientens känsla av utlämnande och upplevelse av smärta. Syftet var att genom en litteraturstudie belysa viktiga faktorer i mötet mellan sjuksköterska och patient med postoperativ smärta. Därtill två frågeställningar; Vad är viktigt för sjuksköterskan i bemötandet av patienter med postoperativ smärta? Vad är viktigt för patienten med postoperativ smärta i mötet med sjuksköterskan? Metod Litteraturstudie med Graneheim och Lundmans analysmetod som verktyg.

The number of HIV- positive is increasing all over the world and it's very likely to meet these patients as a nurse. The interaction between the nurse and the patient is characterized by experience and knowledge and at the same time the nurse is expected to act professionally. The purpose of this literature review is to investigate the nurse's complex of problems regarding the treatment of the HIV- positive patient by exploring the attitudes against HIV among nurses and how the nurse can maintain the integrity of the HIV- positive patient. Antonovsky's salutoqenic model, sense of coherence, has been used as theoretical frame. From 14 articles five topics have been found that influence the nurse's attitudes against HIV-positive patients.

Background   The patient's rights to self-determine their own health care is described in Swedish legislation and guidelines. However, due to infancy, unconsciousness, severe brain damage or certain diseases, some patients might be unable to make such decisions. Ethically difficult situations do occur, not infrequently associated with culture. Since the patient is vulnerable, there is a risk that the patient in the treatment and care can not be bothered to maintain right to autonomy and that the nurse violates patient integrity.Aim                 The aim of this study was to illustrate the nurse's dilemma when the patient refuses vital caring efforts.Method           A literature review of eight scientific articles with a qualitative approach was performed.Results           The results revealed the following domains to describe the nurse's dilemma when the patient refuses vital care interventions: patients? reasons for treatment refusal, the nurse's understanding of the patient's refusal of care and contradictory legislationConclusion     More knowledge and discussion of the patient's decision-making competence is needed for both the nursing profession and those who make decisions on legislation..

The effects of the deregulation of the electricity market 1996 in Sweden on short-term hydropower regulation are unknown. This report investigates patterns in subdaily regulation in the Ångerman River Basin during the period 1993-2011. Differences in subdaily flows and zero flow events between the periods 1993-1995 and 1996-2011 were studied by analyzing hourly data from 8 regulated and 8 unregulated locations with four subdaily flow variation indices. No correlations between the market deregulation and the regulation intensity in the Ångerman River basin were detected. The number of days natural ranges of variability were exceeded and the magnitude of subdaily variation were significantly higher at regulated locations.

Mathematical models possible to simulate are of great importance in order to make successful projects in the aircraft manufacturing industry. An aircraft fuel system is very complex, containing pipes, tanks, orifices, valves and pumps. The principal of this thesis is using the tool Easy5, which no longer is considered reliable enough in terms of development and support. This thesis tries to evaluate the Modelica language as a possible alternative to Easy5. To make this evaluation, the components concerned in the fuel library in Easy5 are implemented to the Modelica language.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

The content of the following report is the summarized result of three students thesis at Blekinge Institute of Technology in co-operation with Water Jet Sweden AB. This report will give the reader a description of principles how to measure the abrasive mass flow in a waterjet cutting system. The work began with a visit to Water Jet Sweden AB to get a closer look at the problem. When the analysis of the problem was done the criteria were defined in the form of demands and desires. The main task of the criteria was to guide the search for the solution. The work proceeded with an extensive search for abrasive flow meters along with obtaining information about flow measurement in general. When the search for abrasive flow meters resulted in nothing all the efforts were concentrated on finding a principle of measurement that could cope with the criteria.

Background: Research shows that the nurse?s presence has a great significance for the relationship between patient and nurse. By this, the nurse can gain a greater understanding for the patient?s situation and thus have an opportunity to influence the patient?s health processes.Problem: Today?s focus on the technology and lack of time in healthcare can create a stress which can make it more difficult for the nurse to prove presence to the patient.Aim: To describe patients? experiences of the nurse?s presence in healthcare.Method: A qualitative approach, where Evans descriptive synthesis has been used. Eleven previously published qualitative, caring science, articles has been used in the synthesis.Results: The synthesis revealed two themes.

Every day in medical care the nurse and the patient meet, they are not just represented as the care giver and the care taker, but also as two unique individuals. The meeting is a very important part in caring and few studies have been made on this topic from the patient.s perspective. The purpose of this study was to describe the patient.s perspective on the meeting with the nurse. The study is a literature review, where articles have been reviewed, encoded, and then categorized. The result builds on our four main categories, confirmed as a unique indidual, the meaning of the information according to the patient, the humanistic side of the nurse, and the importance of humor in the meeting.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.