Sök:

Sökresultat:

2575 Uppsatser om Passive house construction - Sida 54 av 172

Projektering av platsbyggd villa

SammanfattningDetta examensarbete är ett utformningsprojekt av en platsbyggd villa. Frågeställningen tillprojektet var hur man kan utforma en villa.Jag har undersökt vilka A-ritningar, K-ritningar samt statiska beräkningar som behövs för attproducera en platsbyggd villa.Resultatet visar färdiga ritningar till bygghandlingar vilket betyder enplans villa medattraktiv/öppen planlösning och en stark byggnadsstil med tydliga inflytanden av funkisstil.Detta tydliggörs genom pulpettaken, och fasaden som är delvis liggande panel, delvis vitputsad.Yta: 153 kvmAntal rum: 6, varav sovrum: 3.

Hägn i skogsbruket :

This survey was made during the autumn of 2002 and the beginning of 2003, on commission from the National Board of Forestry. The purpose with the survey was to gather experience and knowledge in the organisation about fencing and this was made through interviews. The ambition was also to get knowledge from people outside the organisation that have great experience of forestry and fencing. The interviews were based on questions that have been composed by the author with help from the supervisors. The questions were the same to both the personal from the National Board of Forestry and to the foresters. Interviews were also made with private landowners, gamekeepers, game researcher, the County Administrative Board, the National Road Administration, pole and net retailers and contractors. The target group for this work is the National Board of Forestry to be forwarded to persons interested in forestry with the ambition to spread knowledge about how to prevent damage on the forest by browsing animals. The deer populations are big in the south of Sweden and growing populations have increased the damage on plantations of broadleaves of the most species.

Vikta, hoprullade eller klippta i bitar? : Guldfoliefigurer samt deras fyndkontext

In this essay I have chosen to take a closer look at gold figure foils (Swedish ?guldgubbar?), find their context and analyze it. I have analyzed some earlier studies about gold figure foils that were found in Scandinavia.The focus of my study is based on the locations of the findings. Another important aspect is to discuss if the encountered gold figure foils that were folded and cut looked like that due to intentional motives or not.My conclusion is that when it comes to the locations of the findings they are mostly found in houses irrespective of if it´s in a posthole, wall or house foundation.The other conclusion is that the gold figure foils could have intentionally been manipulated before they ended up in the ground..

Troubleshooting med avseende på avsättningar på gummiduk, Bobergs tryckeri AB

Bobergs printing house in Falun has during some time had problems regarding deposits on blankets intheirs Müller Martini UV-printing presses. Deposits appear in both image areas and non-image areas.These areas have been analyzed and the deposits on non-image areas contain chalk, clay and talc. Thequestion remains how these material bond to the blanket surface. The chalk and clay comes from thepaper. The talc comes from the ink.

Våtmarker i urbana miljöer : växtgestaltning och planering

The practice of landscape architectural involves forming the space in our cities and suburbs, as well as the landscape surrounding. The need of exploiting green environment leads up to, among other issues, flood problem during heavy rain and overfed water environments. The problem is partially caused by the shortage of knowledge, how the environment is responding of the innovations made by the city- urban planning and how to get sustainability. Research and knowledge how to take care of our environment, in a natural way, is increasing. The object of the thesis is to propose control and balance in urban wetlands, and discuss the difference a plant design can do. The thesis deals with discourses in the field of landscape architecture, biological diversity, dam construction, limnology, planting design and management, pollution of the environment and urban design practice.

Professionell garantihantering : Ett arbete inom byggnadsbranschen

A business is always dependent on its customers. It is therefore important to ensurethat customers are satisfied with the product and the warranty included.The study was conducted in cooperation with the building contacting companySkanska Sweden. The aim is to use interviews to collect and process experiences in order to answer the question: How should the recovery process in the construction industry be performed to ensure a professional handling of warranty? The results have shaped my conclusions and I have turned them into a proposal that companies in the industry can benefit from. The study indicates that the industry is not geared for a five year warranty, which was introduced in 2004 and 2006.

Olika fönster mot samma omvärld ? En undersökning av omvärldsbevakningen på Stockholms stadsbibliotek och Akademibokhandeln i Stockholm

The aim of this thesis is to explore how a bookstore chain and a public library meet the needs of their customers through environmental scanning. The empirical material is derived from six semi-structured interviews with six informants, three from each organization, together with an analysis of internal documents. The method used is a case study and the theoretical framework is based on models used in the process of environmental scanning, as described by Choo, Hamrefors and Hedin & Sandström among others, and which facilitate a comparison of the environmental scanning of the two organizations. The results of the study indicate that the library, as a public organization with a mission in society, perceives the environment as society as a whole and all its members as their users, whereas the bookstore concentrates on the sectors of the environment that affect their sales. The consequences of these different views are that the library is more active in the environment and uses surveys as a basic source of information, while the bookstore is more passive, and relies on statistics for information.

Framtagning av en rörväxlaretill sopsugsystem

The main goal of this project was to develop some sort of a diverter for pipestransporting waste in a vacuum system. This unit was supposed to be both cheap andeasy to serve/exchange worn out parts. With a limited space to install the pipeexchanger, the challenge was to keep it as compact as possible without constructingbends with to small radius or to sharp angles as this would wear out the system a lotfaster than planned. The system was also supposed to be able to handle clothes andscrubs from hospitals. Having too much sharp edges or angles would tear the clothesapart.

Institutionella ägares inverkan på redovisningskonservatism - En empirisk studie av företag noterade på Stockholmsbörsen

The increasing holdings by institutional investors have raised concerns about the institutions passive investment strategies and the implications for corporate governance. A way for investors to address moral hazard and opportunistic behaviour of management is to demand conservatism in accounting practices. This paper analyses the relation between institutional ownership and accounting conservatism in the Swedish market by studying firms on the Nasdaq OMX Stockholm over a three-year period. Furthermore, the study investigates whether ownership by institutions with high probability of monitoring managers leads to higher conservatism in financial reporting. To measure accounting conservatism this study uses the asymmetric timeliness measure developed by Basu (1997).

Förlustsänkning i drivlina : En simuleringsmodell av hjulaxel till anläggningsmaskiner

Med ökad fokus på miljöpåverkan och bränsleekonomi vill Volvo Construction Equipment öka verkningsgraden på sina anläggningsmaskiner. På avdelningen för drivlineutveckling jobbar man bland annat med att sänka förlusterna i växellåda och hjulaxel på hjullastare och dumper. För att underlätta detta arbete har en simuleringsmodell som beskriver förluster i hjulaxlar tagits fram. Denna rapport beskriver framtagning av modellen, verifiering av modellen och vilka framtida användningsområden modellen lämpar sig för.Simuleringsmodellen är uppbyggd av ett antal komponentmodeller. Komponentmodellerna innehåller formler för respektive komponent i hjulaxeln.

Analys av miljömedvetenhet under produktionsprocessen

NCC Construction är en del av NCC koncernen och är ett av de största byggföretagen i Sverige idag. Detta examensarbete är utfört i samarbete med NCC Construction i Karlstad och behandlar ämnet miljömedvetenhet. Uppgiften var att studera och analysera de anställda med hänsyn till deras miljöpolicy samt att uppskatta hur väl företaget når ut med sin information, samt att ta fram olika förslag på förbättringar i NCCs pågående miljöarbete.NCCs miljöpolicy har fyra övergripande mål och det finns klart och tydligt nerskrivet vad den anställde är skyldig att bidra med i sitt arbete med hänsyn till företagets strävan mot en bättre miljö. Behovet av en väl formulerad miljöpolicy är väsentligt då det är denna som beskriver vilka mål som finns och hur dessa ska uppnås.För att få fram svar på min frågeställning utfördes en enkätundersökning där arbetsledning, byggnadsarbetare samt underentreprenörer var målgruppen. Denna undersökning var anonym och analyserades med hänsyn till position, ålder och antal år i företaget.Resultatet i denna undersökning visar på stor förståelse hos de anställda inför miljöfrågor.

Gåpall : Ett produktkoncept

This master thesis has been a product realization process. Having BRIO:s walking cart as thestaring point the purpose was to further develop the principle of such products and at the sametime broaden their sector of use. The final result is to be regarded as a complete solutionmeant as a foundation for further development at the BRIO Company. The product aims tosatisfy the demands and needs of the target group called theon the go parent. Trends, qualityand purchase power are features that characterize this particular target group.The project resulted in a walking stool namedBRIO Circus after its source of inspiration.

Metodik för fastställande av bärförmåga på befintliga betongkonstruktioner

Many buildings are now nearing the end of their service life. This applies to both the older houses from the 40's and 50's to the million project houses that did not prove to be as sustainable in the long run. Often there is a desire to extend the service lifetime, but to do that you need to make detailed inspections. The Folkets hus in Gävle is one of those buildings that is in need of renovation and to fulfill the new requirements that must be met in today's buildings. It is desired to make the buildings rentable space more attractive and to extend the building with two more floors.

Utformning av laboration inom Fourieranalys vid Vetenskapens Hus : Musikens matematik - En matematisk förståelse av ljud- och musikinstrument

This report documents the process of designing a laboratory exercise in Fourier analysis at Vetenskapens Hus (House of Science) in Stockholm. The lab is designed for high school students studying science or technical education. It focuses on the physicalunderstanding and mathematical description of sound, in particular music. A model of such a lab is presented in this work; containing a review of the mathematical theory, summary of educational research in the field, descriptions of the design process and of the investigativework that led to the final result. The designed material for the lab includes developed computer programs, visit leader tutorial and description for teachers. .

Target Costing i produktutvecklingsprocessen : En studie på Volvo Construction Equipment i Braås

Bakgrund: Produktutvecklingsprocessen har på senare tid kommit att ses som en strategisk aktivitet som är avgörande för företagets överlevnad eftersom produktens utförande och kostnader till stor del fastställs innan tillverkning påbörjas. ?Target Costing? har sitt ursprung från Toyota i Japan och är en metod för strategisk kostnadsstyrning som har vuxit fram för att tidigt styra kostnader. Metoden används för att integrera kostnadsstyrning i produktutvecklingsprocessen i samstämmighet med kundkrav och företagets egna vinstkrav.Syfte: Syftet med studien är att beskriva och analysera hur ?Target Costing? används i produktutvecklingsprocessen på Volvo Construction Equipment i Braås för att ge kunskap till nya potentiella användare.

<- Föregående sida 54 Nästa sida ->