Sök:

Sökresultat:

433 Uppsatser om Particle-emissions - Sida 4 av 29

Livscykelanalys av flerbostadshus ? energieffektiviseringsåtgärder för minskade koldioxidutsläpp

The importance of energy- and environmental issues has increased, and the work towards reducing carbon dioxide emissions plays a major part. The European Union has set up goals for the membership countries to work towards this to happen. The carbon dioxide emissions in Sweden have been reduced the last few years, but there is still a lot to do. About 30 per cent of Sweden?s carbon dioxide emissions generate from energy usage related to housing, this is why the housing sector is of interest to examine.

Miljöpåverkansbedömning vid tillverkning av etanol från cellulosabaserade råvaror : ekologisk gård självförsörjande med drivmedel

Fuel produced from renewable resources is of big interest. In this project the difference between a few different renewable materials are compared on the matter of environmental load when ethanol is produced. The renewable materials that are compared are Salix, straw and reed canary-grass (rörflen). The cellulose in the material is cut down to small pieces and then hydrolysed so that the sugar from the cellulose can be fermented into ethanol. Tha amount of ethanols that is studied in this work is the smount of ethanol needed to cultivate 1000 ha. The functional unit in the report is 1000 ha.

Restriktioner av växthusgasemissioner : hur påverkas lantbruksföretagens ekonomi och produktionsinriktning?

The agricultural sector accounts for about 13 percent of the total load of greenhouse gas emissions from Sweden (Swedish Environmental Protection Agency, 2007). The Swedish objective to reduce the greenhouse gas emissions with 40 percentage units to the year of 2020, based upon the year of 1990, might imply stricter regulations for Swedish farmers. A regulation or other forms of economic incentives is probably necessary to reduce the emissions originating from the agricultural sector. This study aims to investigate the economic and managerial impact on two agricultural firms with differing production system given that a constraint on green house gas emissions is introduced. Gases included in this study are carbon dioxide, methane and nitrous oxide.

Hur lokal bioenergi kan bidra till att Uppsala kommun når klimatmålet 2050

The purpose of this thesis was to examine how locally produced bioenergy may contribute to meet the climate target year 2050 in the municipality of Uppsala. The goal of reduced GHG-emissions from current 6,8 ton CO2-equivalents to 0,5 ton CO2-equivalents per capita and year, year 2050 is based on avoiding harmful penalties of an increased level of GHG in the atmosphere. By estimating available biomass in the county together with examining future technologies and emission factors for the substrates used, four possible future scenarios has been developed focusing either on electricity generation or production of biofuels. GHG-emissions of year 2050 have been calculated using the software LEAP. The conclusion is that bioenergy, depending on how it is integrated in the energy system, may reduce greenhouse gas emissions between 0.6 ton CO2-equivalents and 1.4 ton CO2-equivalents per capita or 12% to 25% compared to 5.5 ton CO2-equivalents in the reference scenario 2050. The greatest reduction is obtained if biofuels are produced in combination with energy efficient heat requirements in buildings..

Chewing behaviour of growing cattle

Chewing behaviour includes both eating and ruminating activity. Chewing behaviour is of great importance for the feed intake as through the action of chewing (i.e. eating and ruminating) animals mechanically process the forages in small particle sizes and prepare the food for digestion. As cattle grow the chewing behaviour changes along with increasing body weight and chewing efficiency is increased. The aim of this thesis was to review the available scientific literature in order to describe chewing behaviour in growing cattle, as well as the factors that affect this behaviour.

Från Rio via Kyoto, till Marrakech. Hur har rättviseproblematiken tolkats i anpassningsdiskussionerna?

Global climate change is one of the greatest challenges in our history. As the average temperature is rising due to anthropogenic emissions, impacts such as floods, droughts and hurricanes, affect the lives of millions of people. Though the least developed countries are least responsible for emissions, they are the worst affected. This thesis focuses on environmental justice in the adaptation discourse. By outlining the adaptation discourse from the United Framework Convention on Climate Change principles, to the Marrakesh Accords, via the Kyotoprotocol my ambition is to analyse how environmental justice has been interpreted in relation to the adaptation discourse.

Klimatpåverkan vid vägbyggnad -beroende av vald konstruktion

It?s a fact that the climate is affected by the vehicle that runs on the worlds roads. But theconstruction of the road itself is rarely thought of as a climate threat. Svevia and the Swedish roadadministration have opposite views of how the construction of roads should be carried thru. It?sthe difference between those two construction methods that is the base in our thesis.The amount of energy use or the emissions are not analyzed for neither the Swedish roadadministrations nor Svevias construction models.

Sapa Heat Transfers koldioxidspår : En kartläggning av verksamhetens koldioxidutsläpp

Sapa Heat Transfer is a company that produces aluminum heat-exchanger strips for the automotive industry. Sapa Heat Transfer wish to chart their emissions of carbon dioxide in order to meet future demands on carbon dioxide reporting. They also would like to examine the meaning of the term ?green electricity? which is marketed as carbon dioxide free, and the sort of electricity that they purchase. This report includes both direct (liquefied petroleum gas and diesel) and indirect (water, process-water, long distance heating, waste) emissions from their company.

Parametriserad 3D-modell av cyklon : Parametrisering av en 3D-modell av ett cyklonfilter i SolidWorks för snabb framtagning av nya konstruktioner till Outotec Skellefteå

This bachelor thesis project has been executed at Outotec Sweden AB in Skellefteå. Outotecs main business focus is selling mineral and metal processing technologies. A rest product from the metal process is particle-polluted gas and cyclone designs are today the most commonly used abatement device for particle control. A cyclone provides a simple design with high efficiency particle percolation by using air streams.The purpose of this work is to reduce the time it takes create new cyclone designs in Outotecs projects. An extensive construction work is needed for every new cyclone order due to new designs.

Livscykelanalys av en ekologisk bomullsskjorta - miljöpåverkan från vagga till grav

This study includes a life cycle assessment, LCA, on an ecological produced cotton shirt for the company Reflective Circle, which designs ethical and ecological clothes.Initially were cotton farming and textile production studied to gather basic knowledge about the processes. Since this shirt is being ecological produced in the whole production chain, we studied what an ecological production means, but also how a conventional production works. When this was done we could start to discuss the differences and similarities between the production of the shirt and general conventional production.When the LCA was first initiated, the main focus was on the green house gas emissions from the manure at the cultivation. Thereafter the process steps such as picking, ginning, carding, spinning, weaving and sewing were being studied. The picking is done by hand, but the rest of the processes are handed by machines which consumes energy.

Analys och beräkning av emissionsfaktorer för växthusgaser

An increased awareness about the global warming has created a demand for more information on how the climate is affected by different activities.This master thesis was initiated by Tricorona, a Swedish company that offers its customers analysis and calculation of their climate impact. Tricorona also supplies climate neutralisation with CERs, in accordance with the Kyoto protocol and controlled by the UN. This work demands updated emission factors for greenhouse gases. An emission factor gives information about the greenhouse gasintensity of a service or a product [kg CO2-eq./ functional unit].The purpose of this thesis is to examine how electricity, district heating, hotels, taxis, food and materials affect the climate and how emission factors for these areas can be calculated.This was done by reviewing and comparing different studies and by interviewing experts. The information was evaluated and recommendations on calculations and emission factors were made.The consumption of energy is the main source of greenhouse gas emissions for district heating, electricity, hotels, taxis and materials.

Spårtrafik i norra Stockholmsregionen

Northeast Stockholm is a region developing fast. There is already a great need for new transport solutions for the people commuting to the city, since long queues slow down car traffic and the local railway, Roslagsbanan, needs to be upgraded to attract more travelers. The competitive advantage of rail?traffic over the car when it comes to greenhouse gases and air pollutants is another reason to develop Roslagsbanan.This report investigates the differences between car and train to create a basis for a proposed expansion of Roslagsbanan. Once the proposal is presented, costs, emissions reductions and public benefits are analyzed.

HelpSeat

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

Utveckling av loadlimiter för bilbarnstol

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

Smarta Elnät ? Modell och Marknad

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

<- Föregående sida 4 Nästa sida ->