A large amount of our time is spent indoors in an artificial climate. To make the experience pleasant there are requirements on the ventilation and the heating system. At the present time the most common form of heating is a radiator system complemented with a ventilation system. A ceiling heating system with combined heating and ventilation can replace the two separated systems. The benefit with a ceiling heating solution is that it saves space since the radiator system is no longer needed.

In 2006, Stora Enso Skog implemented an education program in water management for harvester operators, timber purchasers, cut block planners and supervisors. The focus of the program was creating stream crossings with minimal harm to the stream and the surrounding riparian area. This main purpose of this study was to determine the difference in work procedures before and after participating in the program. The methodology consisted of field studies and interviews with harvester operators and their supervisors. The field study looked at how the streams had been crossed concerning the number of crossings, visible damage to the stream and/or the riparian area made by the machines. Biological parameters such as the width and dept of the stream and amount of large woody debris in the stream were also measured. The field result from 30 harvesting sites showed no significant difference between sites that had been harvested before or after the education program. But the harvester operators and their supervisors experienced an increased concern for watersheds after the educational program.

A field experiment was carried out in 2006 to investigate the effects of deep rotary cultivation on sugarbeet growth. The background to the experiment was a 2005 study showing potentially higher yield, higher cleanness and higher sugar content when primary tillage was carried out to 35 cm depth with a rotary cultivator. On four field sites in Skåne (L:a Isie, Ädelholm, Stävie and Vragerup), five different treatments were compared: mouldboard ploughing in the autumn to 20 cm; mouldboard ploughing in the autumn to 20 cm + rotary cultivation in the spring to 35 cm; rotary cultivation in the autumn to 35 cm; rotary cultivation in the spring to 35 cm; and mouldboard ploughing in the spring to 20 cm. The rotary cultivator used in the treatments is manufactured by a Dutch company, Imants. The implement cultivates the soil with spade tines fitted on arms that are mounted on a horizontal rotating PTO-driven axle. Beet plants were inspected and yield determined in the experiment, and three soil parameters were examined: penetration resistance, water infiltration and infiltration of blue dye. Root shape was also examined. The site at Stävie was not harvested due to poor beet establishment. At the other sites, the highest yield was found when the soil was rotary-cultivated in the autumn.

Akvaponik beskrivs som en innovation som kan fr?mja h?llbar livsmedelsproduktion, samtidigt som dess implementering ?nnu inte har n?tt kommersiell framg?ng. Tidigare forskning identifierar flera hinder f?r en etablering av systemet i olika delar av v?rlden, men situationen i Sverige ?r mestadels outforskad. Denna studie unders?ker vad som hindrar kommersiell akvaponik i Sverige utifr?n ekonomiska, regelm?ssiga, sociala och milj?m?ssiga aspekter, samt hur dessa hinder kan motverkas.

I januari 2011 delades de tva? sista fria IPv4-adressblocken ut av Internet Assigned Numbers Authority (IANA) till den asiatiska Internetregistratorn Apnic (Asia Pacific Network Information Centre). Detta inneba?r att adresserna som fanns i den centrala adresspoolen nu a?r slut. Registratorn hade anso?kt om dessa adressblock eftersom det ra?der akut brist pa? Internet Protocol version 4- (IPv4-adresser) i Asien samtidigt som Internetanva?ndarna i denna del av va?rlden o?kar explosionsartat (Magnusson, 2011a).

Bakgrund och problem: Digital transformation ?r ett hett ?mne inom aff?rsv?rlden, med ett ?kande antal f?retag som str?var efter att anpassa sig till digitala teknologier f?r att f?rb?ttra sina aff?rsmodeller och skapa nya v?rdeskapande aktiviteter. Men med digitala transformationen kommer ocks? utmaningar som budgetber?kningar och brist p? teknisk kunskap vilket ofta leder till misslyckade transformationer. St?rre f?retag har ofta mer resurser till att hantera dessa utmaningar j?mf?rt med SMF.

In some herds it has been observed that extremely short teats have become a problem; with a negative influence on the milking performance. The aim of this study was therefore to investigate to what degree the quality of the teats and the milk in cows with short teats is affected as compared with cows with normal teat length and furthermore if the milking performance could be improved by using a liner adapted to short teats. This study was divided in two parts. In the first part, it was examined if there were any differences between short teats and teats with normal length with reference to the milking performance, udder emptying, teat treatment, milk quality, and udder health. 11 pairs of cows were used and in each pair of cows one cow had teats shorter than 40 mm while the other cow had teats longer than 50 mm.

Bakgrund: S?ker v?rd ?r en grundpelare som ska genomsyra v?rden. Den utg?r grunden f?r sjuksk?terskans omv?rdnad och s?kerst?lls genom k?rnkompetenserna. S?ker v?rd ?r dessutom en etisk och juridisk skyldighet.

This Masters thesis is made as the first of two visitor surveys of three urban forest areas. These areas are; Skutan recreational area in Haninge, Ugglevikskällan on Norra Djurgården in Stockholm and the Paradiset Reserve in Huddinge. The study is made in cooperation with the managers of the three areas operating within the European Union Life Project regarding Urban Woods for People. The goal has been to collect data through studies of visitors and close by residents in the three areas. The results are to be used as primary values for the follow-up as well as a basis for managerial decisions. The interviews and surveys are also constructed in a fashion so that they can be used for the follow-up study. For the Skutan recreational area the mode of contact was by sending forms to the nearby residential areas.

This thesis work has been performed at Volvo Aero Corporation in Trollhättan, at the department of ?hot structures? involving aircraft engine GP7000. The purpose with the study was to investigate the possibility to reduce size of the forging of flanges on the rear turbine frame when purchasing. Thereto examine the parameters that affect the flanges motion during the manufacturing process. The goal was to provide Volvo Aero with foundation to later bring in slimmed forgings.

Purpose: The purpose of the study is to in a comparative and causal way explore whether there is a relationship between risk and return and also how it is perceived on the Nordic financial markets.Theory: The theoretical frame of reference applied in the thesis is considered relevant inthe perspective of the study?s purpose and research questions. We have among other theories used The Capital Asset Pricing Model, The Efficient Market Hypothesis and various Behavioural finance theories.Method: The study has its starting point in a quantitative approach with a quantitative data analysis supported by secondary data extracted from Thomson Reuters.Empirics: The empirics contains regression analyses made from calculated secondary data of 240 randomly chosen companies from Nasdaq OMX Stockholm, NasdaqOMX Copenhagen, Nasdaq OMX Helsinki and Oslo Bors.Conclusion: The study conclusions show that there are both a negative and positive relationship between volatility and actual return on the investigated markets. Considering this prior statement we can conclude that the Capital Asset Pricing Model can?t correctly describe the actual relationship between the parameters investigated on the current sample.

Bakgrund: Tidigare studier visar att postoperativ sm?rta f?rblir underbehandlad, trots att 80% av alla patienter upplever en m?ttlig till sv?r sm?rta efter operation. Studier visar ?ven att sjuksk?terskors kunskap g?llande sm?rta ?r otillr?cklig och att sjuksk?terskornas egna v?rderingar kommer in i sm?rtbed?mningen, vilket p?verkar den sm?rtlindring som patienterna erh?ller. Syfte: Denna studie syftar till att unders?ka vilka m?jligheter och sv?righeter sjuksk?terskor p? en kirurgisk v?rdavdelning har i att bed?ma och hantera patienters postoperativa sm?rta. Metod: Tre semistrukturerade fokusgruppsintervjuer utf?rdes, d?r sammanlagt nio sjuksk?terskor deltog. Dataanalysen genomf?rdes med Graneheim och Lundmans (2004) kvalitativa inneh?llsanalys. Resultat: I resultatet framkom tv? huvudkategorier, den f?rsta var ?Utf?rande av sm?rtbed?mning? och det framkom att sjuksk?terskorna anv?nder NRS framf?r andra skattningsinstrument d? det ans?gs vara den snabbaste metoden och gav goda m?jligheter att bed?ma sm?rtan.

The division of Engineering Materials at Linköping University, department of Management and Engineering, conducted a research project concerning Fatigue life of thermal barrier coatings during 2009. During this project equipment to provoke these fatigue failure by rapidly heating and cooling test subjects in cycles, was ordered.Design and manufacturing of the equipment was handled internally at LIU.The equipment was built using a furnace that is lowered and raised over the table where the test subject is placed. To keep the temperature of the furnace a lid slides in place to close the downward facing opening of the furnace when it is in the raised position. On this door there is nozzle that is used to cooling of the test subject by air.To make sure that the equipment can work independently you need an automation controller that can evaluate if movement can occur without danger of collisions. The control system also needs to monitor that all elements are performed according to plan.This degree project is based on a modular system from OPTO 22 and includes the configuration of a PLC that will be supplied with logic and a user interface.The degree project resulted in a graphic interface in which a user can set desired values for different parameters and get information about current values for them.

This master thesis project at KTH is performed in the Mechanical and Aerospace Engineeringdepartment at University of Florida (UF). The thesis is a small part of a gas turbine researchproject where a vapour absorption refrigeration system (VARS) and a high pressure regenerativeturbine engine (HPRTE) are integrated together. The main objective is to build a computermodel of the VARS. The computer model is supposed to be used to analyse the off-designperformance of the VARS and should also be easy to integrate as a subroutine in a more complexsystem model. To model the VARS some knowledge of the absorbent/refrigerant mixture had tobe well known, in this case a mixture of ammonia and water.

We have different kinds of signal processing everywhere around us in our everyday life, in our cellphones, when we are listening to music, watching TV etc. This makes signal processing a very interesting and important technical area, where the demand of skilled engineers sets the limit of what is possible.Working with signal processing requires in-depth knowledge in areas such as mathematics, physics, electronics, and other related areas. For this, it has traditionally been demanded by a talented developer to also master the advanced programming languages such as C / C + + and Assembler.This has begun to change; today there are several companies that offer graphical development environments for signal processing, environments where programming skills are not needed anymore, and the focus can be on signal processing instead.The goal with this project is to build a corresponding graphical development environment to reach an understanding of what is required of these systems, and also to grasp what opportunities that are available within graphic programming. Inspiration for the work has partly arise from some of the tools available on the market, and partly from previous theses that have been written about graphic programming.The challenge lies in creating a program that can execute signal diagrams in real time from given signal blocks, and be able to handle feedback loops in an efficient way and to do so at the lowest "cost" in terms of clock cycles as possible. This should also be compared against to code, compile and run a complete signal diagram directly.To increase the usability it should also be possibility to externally manage in real time the parameters of the signal diagram during execution.The interface is a separate program, which is to some extent similar to Matlab Simulink, where a signal diagram is drawn up graphically by connecting wires between different signal blocks.