The task was to deliver a solution that could be implemented in today?s production of the FH truck. To make the project successful it was most important that the end result had a high maturity level. For that reason an analysis of ergonomic, laws and regulations, and possible materials where conducted. To show that this project is profitable and can be realized a ruff cost estimated of material and tools is added to the research.

The thesis is an examination of the methods that are appropriate and long-term choice to obtain clamping force and secure screw joints in production. The employer, Scania CV AB, transmission manufactures axle gears to all trucks produced in Södertälje. One of the most common assembly elements is screw joints, where the clamping force is essential to achieve a secure joint. Current methods to secure the joint is due much of the friction effect and is an indirect method to measure the clamping force. The clampforce accuracy becomes more widely with torque angle control.

Dooria Sweden AB is one of the main door- and doorframe manufacturers inSweden. They deliver door frames for indoor use for project oriented buildingsites, for these types of building sites the doorpost comes pre-assembled. DooriaAB wants to minimize transport to reduce impact on environment and thetransportation costs of pre-assembled doorframes, this thru simplifying themethod of assembly.The main purpose of this thesis has been to develop a prototype solution thatbrings the three parts of the doorframe together with the same properties regardingstability and tightness of joints as the current method of assembly. A profile ofdemands and wishes were created in collaboration with Mårten Dragstedt, DeputyDirector of Dooria Sverige ABBy following the chosen method the authors have been able to produce a fullyfunctional prototype that meet the demands that were put on the product. Catia V5R20 has been used as an aid during prototype construction and virtual tests.

Government regulations and customs duties restrict the import of trucks to some of the markets to which Scania tries to sell their trucks. The distribution problem due to these regulations is solved by the foreign assembly department, KD, at Scania. This means that competence is needed and costs are added not related to Scania's core operations.The aim of this master thesis has been to analyse and to evaluate alternative ways of managing the packing operations considering cost, quality and work organisation. To study and examine the work methods and operations of today and also to present methods measuring the operations effectiveness and productivity.We have used the system approach to maintain totality and to understand the component's relation to this totality. Field studies combined with studies of relevant literature and studies of other companies operations have given us the knowledge and the understanding of the packing operations needed.

The idea with constructions made out of prefabricated elements is that it should be quick and easy to build as the demands for lower production costs, increased profitability and shorter production times are constantly increasing. High accuracy in measurements and well-balanced tolerances is required to achieve this. The fact that the concrete-elements doesn?t fit and that damage occurs during assembly is a highly topical issue even though we now have methods and systems that make this high-intensity construction possible. Through this report we want to highlight the problems that cause the dimensional and tolerance problems and give suggestions on how to come to terms with these.

En undersökning om möjligheterna att använda återandvändningsbara pallband och de ekonomiska förutsättningarna för detta. En genomsökning av vad som finns på marknaden. Beräkning av de krafter som enhetslasten kan utsätta pallbanden för. Utveckling av egna förslag till återanvändningsbart pallband med snabbspänne och bandning på tre sidor. En översikt av de positiva och negativa effekter som blir vid ett byte från dagens bandning med PP-band till ett återanvändningsbart pallband.

Denna studie syftar till att synliggöra olika bedrägliga beteenden som riktar sig mot innovatörer. I studien diskuteras möjligheterna till att etablera en funktion som skyddar innovatörer mot en typ av övergrepp som blir allt vanligare. Hur skall subtil manschettbrottslighet begränsas när den är både riskfri och lönsam?En vägledande fråga i diskussionen har varit: Skall innovatörer ha samma skydd för sin upphovsrätt som andra fria yrkesutövare, eller ska de fortsätta få vara villebråd utan skydd av rättsväsendet?Resultatet bygger på dokumentanalyser och en kvalitativ studie om upphovsmän till patent, samt intervjuer med personer inom branschen innovationer och entreprenörskap. Resultat baseras bl a på den kvalitativa studien och beskrivs genom fakta om innovatörerna Dr.

The aim of this work is to understand the recruitment of candidates to the local representative assembly in the municipality of Täby. The method used is qualitative interviewing, of a total of eight local politicians in Täby. The theory in which this work rest upon is based on a new-institutionalist perspective. Of great importance is the thoughts of the politicians involved in the recrution process, what do they think were the reasons that controlled the order of priority in the party list among the pool of candidates? Were there any obstacles for minorities in the politics like for example foreigners, women or young people? The study is taking it?s departure from the politicians who candidated in the election of 2002-2006 and the ones which are candidating to the election this coming autumn.In conclusion the aim is to understand the reasons that gives some of the candidates electable places to the assembly, and what the actors themselves think are the conclusive qualities that matters the most.

?Optimizing the workflow of hydraulic reservoir tanks? is a degree project made by Jonas Olsson, student within the faculty of technology and science, during spring semester 2012. The project comprise 22,5 ECTS.Volvo Construction Equipment, located in Arvika, was the client in this project. The mentor at Volvo CE was A?sa Barck, and the mentor at Karlstad University was Monica Jakobsson.

European Union has made a new decision that all new built houses by 2020 shallbe near-zero energy houses. Boverket?s definition of near-zero energy housesintends buildings with good energy performance in which a proportion of theamount of energy that must be added to the building is made of renewable energy.Passive House is a set of requirements from FEBY designed to build energyefficient buildings. This is achieved by reducing loss of heat through the buildingenvelope and to take advantage of the passive heat from solar radiation,installation and heat sources like people living in the house.This project has been made with help of Anebyhus and one of their model houseshave been examined from the report?s issues, including Anebyhus?s energyperformance, requirements for the manufacturing and assembly, how theenvelope must be improved to fulfill the requirements for the Passive House andwhat energy calculation programs are available on the market.The report aims to provide solutions for energy efficient houses that are adaptedfor production of house building.Two visits to Anebyhus has been done to study their manufacture and assemblyof building elements.

Phenylbutazone has been discussed in the world of the equestrian sport several times and different countries have diverse opinions on its use in competitions. The progressive list that permits phenylbutazone with plasma levels up to 8 µg/ml was presented at the FEI General Assembly in November 2009. The list was voted to be accepted, but later several countries realized the consequences and after protests the list was rejected and is going to be discussed again at the FEI General Assembly 2010. In this literature study I have studied the relationship between the concentrations of phenylbutazone in plasma and the effects on lameness. The purpose was to establish whether the limit of 8 µg/ml phenylbutazone in plasma affects the equestrian sport.

This bachelor thesis project has been executed at Outotec Sweden AB in Skellefteå. Outotecs main business focus is selling mineral and metal processing technologies. A rest product from the metal process is particle-polluted gas and cyclone designs are today the most commonly used abatement device for particle control. A cyclone provides a simple design with high efficiency particle percolation by using air streams.The purpose of this work is to reduce the time it takes create new cyclone designs in Outotecs projects. An extensive construction work is needed for every new cyclone order due to new designs.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

Eskilstuna municipality is working to be a municipality that the people who are living in it are proud of. In a way to do that two students have examined what changes are good or bad when there outdoor environment are rebuilding and changing By doing interviews with the people who are living next to two streets that already have been going through big changes and during those interviews the inhabitants have hade opportunity to explain what they are seeing as good or band changes in the surroundings. The results from these interviews have been compared to interviews with a politician`s vision for the area and white-collar workers that are working for the Eskilstuna municipality. If you want to shorten this report to a couple of sentence it would be:By planting trees and busses and letting the politicians that have a vision be part of the planning process the people that are living in that area is going to be satisfied..

This report deals with an exam report written by Olle Hjalmarsson and Thomas Likar, students at Högskolan i Halmstad. The project was carried out for Haldex Traction AB in Landskrona whose business consist of manufacturing automatic all wheel drive systems (AWD-system). These systems consist of a plate clutch which activates all four wheels of a 4-wheel driven vehicle. An important component in these clutches is the accumulator which basically consists of a piston under the load of a spring which creates an oil pressure with the help of an electric motor used for actuating the clutch.At Haldex difficulties has been experienced regarding the assembly of the accumulator parts due to the small tolerances between the piston and the hole of the accumulator in the cast aluminium housing. Attempts have been made to assemble the parts in existing robot cells.