This study has been carried out in cooperation with Unilever and partly with the EC founded project, Smartdoc IST-2000-28137. In areas of statistics and image processing, both the amount of data and the dimensions are increasing rapidly and an interactive visualization tool that lets the user perform real-time analysis can save valuable time. Real-time cropping and drill-down considerably facilitate the analysis process and yield more accurate decisions. In the Smartdoc project, there has been a request for a component used for smart filtering in multidimensional data sets. As the Smartdoc project aims to develop smart, interactive components to be used on low-end systems, the implementation of the self-organizing map algorithm proposes which dimensions to visualize.

This report describes the planning and the accomplishment of the final diploma workat the study program Mechanical Engineering, Department of Engineering Sciences, Uppsala University. Two students carried out the diploma work at GE HealthcareHusbyborg in Uppsala.The aim of the diploma work was to develop and improve existing processequipment for 11C-radiochemistry in PET. The process equipment was to be dividedinto smaller independent modules to make it more flexible. Part of the existingprocess equipment is an oven that is supposed to perform a specific chemicalreaction. One of the main goals was to study and improve this oven.The work could be divided into three main phases: 1.Present concepts for one module, and interface between different modules.

Quality assurance for Scania engine componentsScania engines have become one of the world?s most renowned corporations in themanufacturing of engines. This is mostly due to the quality and performance thatScania have shown. However, this does not stop Scania from trying to achieve moresuccess in the fields of development and research to assure the quality of theirengines.The purpose of this thesis is to show how Scania ensures the quality of the enginecomponents, both those who made externally and internally at Scania, also inclusivethe manufacturing and assembly process.Three engine components were examined: D16 block engines, water pump andXP-Iinjectors. The study included the whole process from the step of supplying therow materials to the last step in production functional test.In this thesis an investigation of how other companies are working with qualityassurance was conducted.

The purpose with this thesis is to get a compilation of all the critical bolted joints of all enginesproduced at LV Motors. ABB LV Motors produces induction engines with seven shaft heights. Eachengine size exists several variants of components ex. standard shield and flange shield. Depending onwhich components the engine is equipped with arises various types of strains in the engine's parts,certain assembly ways are more favourable than other.The most critical parts in the engine from a mechanical point of view are the screw units betweenshield/stator, feet/stator and bearing cover/shield.

This report describes the planning and the accomplishment of the final diploma workat the study program Mechanical Engineering, Department of Engineering Sciences, Uppsala University. Two students carried out the diploma work at GE HealthcareHusbyborg in Uppsala.The aim of the diploma work was to develop and improve existing processequipment for 11C-radiochemistry in PET. The process equipment was to be dividedinto smaller independent modules to make it more flexible. Part of the existingprocess equipment is an oven that is supposed to perform a specific chemicalreaction. One of the main goals was to study and improve this oven.The work could be divided into three main phases: 1.Present concepts for one module, and interface between different modules.

A LED spectrometer has been constructed for qualitative spectrometry using certain wavelenghts. The LEDs and the photodiode are being controlled with a microcontroller that is connected to a computer to power the components and save data. The spectroanalysis made with the LED spectrometer were significantly different to a standard spectrometer, concluding that more analysis should be made until a final product is ready. Some areas of improvements are suggested. .

Introduction: Analysts worldwide valuates stocks and companies by using different valuation models. The models are used to calculate how much public company?s stocks are worth and to identify whether stocks are over- or undervalued.  Objective: The objective of this essay is to study which valuation models are mainly used by financial analysts in Swedish banks. The purpose is also to study how reliable these models are considered. Method: The empirical study is based on a qualitative approach through interviews with financial analysts. The study includes both primary data (interviews) and secondary data (literature, websites and scientific articles)Theory: The theory chapter includes methods of analysis (fundamental and technical analysis), Valuation models, components of valuation and an example of a valuation with the Discounted cash flow model. Empirical study: The study includes a qualitative research that consists of interviews with financial analysts.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

HAFA Bathroom Group has given us the assignment to develop a standardized back panel for their bathroom cabinets. This cabinet is going to be applied to most of their current and future cabinet solutions. To this point, they have constructed unique suspensions-and back panels for most of their cabinet models. They have also been forced to pull wiring and assemble the cabinets differently because of factors like; position of the wall sockets, dimensions of the cabinets and their shapes.The company wants to distance themselves from their current solution, firstly because the cost of having manpower to design each individual suspension solution, secondly because they will save a lot of money when the manufacturing process requires a minimum of components to be constructed. As a result of this, the company can use their resources better to develop future products.The main idea is that the consumer isn?t required to change the suspension or back panel when they decide to buy a new cabinet.

Ever since the remains of the ancient city of Pompei was rediscovered in the 18th century it became an important destination for artists and architects. The unique settings made it possible to study the greek and roman art and life which was considered important having knowledge about. As a complement to the architectural education at the Royal Academy of Fine Arts in Stockholm the students could gain funds to make a Grand Tour and visit Pompei.The aim in this study is to explain the study tours the architects made to Pompei by studying their experiences at the site. Fredrik Wilhelm Scholander and Isak Gustaf Clason serves as examples of two swedish architects visiting Pompei on such a tour. In the study I describe why and how these tours were made and why Pompei was an important destination.

At Volvo Cars Torslanda's paint shop there is a requirement to in a fast and effective way get an overview of the plants capacity. Therefore a capacity template was constructed as a tool for the engineers at Volvo several years ago. This template has during the years become complicated and outdated. Thus this thesis work will resort as a new capacity template, built from scratch. The new template has been built up based on requirements from Volvo and the concept of OEE (Overall Equipment Effectiveness).

This thesis has been done in collaboration with Höganäs Digital Metal. Höganäs Digital Metalwork with 3D printing of metal and need giveaway components that they can give tocustomers to show their development process.By making a parametric CAD model can we generate about 200 different designs of a?Höganäs brännvinskrus? in miniature. You can choose between different items that shouldbe in it and a variety of perforations to look into it..

The accounting information system comprises budgeting, accounting, and costing. The accounting information system has, traditionally, constituted an integrated system where the different elements collaborate. If ABC is introduced this order is disturbed, since ABC is based on another logic which cannot easily be integrated with budget and accounting. ABC, therefore, is usually used parallely to the conventional costing method. There are, however, companies that have taken its ABC one step further by letting it replace the old costing model and integrate it with the accounting information system.

The purpose of this paper is to examine the role of logotypes within the visual identity and identify possible reasons that motivate companies to change their logo. This paper should also clarify how different parts of the visual identity affect each other and how they are interconnected. The thesis research question is formulated with the purpose in mind and has led to the following question: How can a logo change contribute to enhanced visual identity? Since we wanted to obtain a better understanding of the chosen research area with help of interviews have we chosen a qualitative method for this thesis. During the process we have let the empirical material control the chosen theories.

Den växande konkurrensen mellan företag har medfört att dess försörjningskedjor blivit ett medel för att erhålla konkurrensfördelar. Genom ökat fokus på lägre kostnader, förkortad livscykel på företagens produkter samt en ökad efterfrågan har resulterat i att försörjningskedjan hos företag ökat i komplexitet. Denna ökande komplexitet har skapat ett behov av att identifiera problem i försörjningskedjan. Vidare har den ökande konkurrensen medfört att ett företags ledtid blivit en viktig parameter. Hos Make-to-Order (MTO, tillverka-mot-order)-företag kan en kort ledtid vara en avgörande faktor för att bli ordervinnare.