The aim of this study is two folded. We wish to investigate if there is a value premium from hedging jet fuel exposure for American and European airlines. We also seek to answer if airlines can affect their probability to default by using Risk Management. During the period 2003 ? 2006 there existed a value premium for airlines that hedged their expected future consumption of jet fuel.

The purpose of this study is to compare the economic differences between withdraw of forest fuel and withdraw of pulpwood in first thinning, to see which method gives the maximum profitability (income - cost). Another purpose is to investigate the economic impact of the thicket cleaning. The study compares four different methods: i) pulpwood output with thicket cleaning, ii) pulpwood output without thicket cleaning, iii) forest fuel output with thicket cleaning and iv) forest fuel output without thicket cleaning. The study was conducted in a 30-years old stand, dominated by spruce, outside Harg in Uppland. The method that generated the best economic net income was pulpwood without thicket cleaning. It generated a positive net of 1,383 SEK per hectare. Forest fuel output without thicket cleaning also generated a positive net in 720 kronor per hectare.

Vehicle simulators are becoming more common in vehicle industries. Company earns lot of money on simulations instead of real tests. Real tests are necessary but not made so extensively as before.In this thesis the building of an vehice simulator will be described and a comparison between three different cruise controls. The three cruise controls are PI-regulator, a regulator who regulates after positions in the terrain and a MPC-regulator. The reason for choosing this three is to see the difference between simple regulation and more complex regulation with respect to fuel consumption, travel time and complexity.The vehicle simulator is made in Matlab/Simulink, Visual Studio and Open Scene Graph.

A Monte Carlo simulation of the ELECTRA reactor using (U,Zr)N fuel and a liquid lithium coolant is performed using the Serpent simulation code. The results show a reactor with a total reactivity coefficient of the coolant, fuel and material expansion that is strongly negative. These properties make the ELECTRA reactor a good candidate for a safe space reactor that could be used for propulsion of manned and unmanned space vehicles to Mars and other parts of our solar system..

Environment friendly transports are one of the main topics in the industry and society today.Shell organizes an annual university competition called Shell Eco Marathon. The goal is to buildthe car that consumes the least fuel during a race. KTH participated for the first time in 2006.The engine for this competition, DoubleTwo, has been developed within the school. Theprinciple is a two stroke counter piston HCCI engine with variable compression ratio. HCCIstands for homogenous charge compression ignition.

This thesis deals with the numerical 3D simulation of a four stroke, spark-ignited, internalcombustion engine, which is mounted on a high performance motorcycle. The work, carried outin collaboration with Politecnico di Milano and MV Agusta, focuses on the simulation of theintake, compression and expansion stroke, including combustion simulation, using an opensource CFD code.Simulation of internal combustion engines offers a great challenge in the field of CFD research.Moving boundaries of the solution domain, caused by the motion of the piston and valves, leadsto deformation of the computational grid, with decreasing quality of the solution as result. Basedon this, a previously developed mesh motion strategy was employed where a number of meshesare used to cover the whole simulation cycle. Within each mesh interval the internal cell pointsof the mesh are moved to account for the boundary motion of the piston and valves. This strategywas previously applied to simplified geometries as well as real engine geometries.

This report was written by Sofia Ericson and describes the degree thesis with the title: ?Connections between the growing site of bio fuel, the chemical composition of bio fuel ash and the deposit growth in a bio fuel fired boiler.? The purpose of this degree thesis was to avoid melted deposit growth in the bio fuel fired boiler at ENA Kraft in Enköping. Potassium and sodium are known to lower the melting point of bio fuel ashes and are therefore not wanted in the trees in higher amounts than necessary for the growth. Silicon is also known to be important for the deposit growth but it is not possible to say in general if higher or lower contents of silicon is better. The relation between silicon and other chemical substances is more important than the total amount of silicon.

A third party access to district heating networks has been proposed in Sweden, to increase the competition on the district heating market. Such third party access could create opportunities for the agricultural sector as an energy producer. This study describes the technical, economical and environmental prerequisites for a farmer cluster to build and run a heating plant, fueled with local wood fuel. The heating plant in the described scenario is 8 MW and will supply a village of 1000 houses, and is fueled with wood chips exclusively. Supplying a heating plant with fuel puts high demands on the logistics, since there need to be a continuous flow of fuel. In the scenario, wood residues from felling and thinning is stored in stacks in the forest, and a few times a year chipped and transported to a storage area at the heating plant. In the study, an estimation of the profitability has been made by estimating the cost of the investment, personnel, operating and maintenance costs and costs for the fuel and ash handling.

Stump biomass is energy rich and stump harvesting for use as fuel become more and more interesting in Sweden. Swedish Forest Agency (2009) has estimated that stump harvesting in Sweden would respond to an annual energy supply of 57 TWh/year. However, stump has not been recognized as a bioenergy resource in Sweden. Suitable methods for pre-treatment of stump are probably of great importance to make it accepted as fuel. It is therefore rewarding to carry out an investigation in this area for stump. This report represents results from a diploma project, which was aimed to develop a fixed bed reactor for experimental study of biomass torrefaction, followed by TG analysis and kinetic modelling employing Ozawa method and different kinetic models including one-step and three-pseudo-component models.

This project examined the possibility to create an electronical aid with the purpose of increasing environmental awareness and to design the aid in a fashion that inspires other to develop similar applications. The impact of car traffic was examined, and the base of the aid was built up in modular form to simplify the hardware aspect. For the active, data processing part of the aid the Arduino platform was chosen because of its simplicity and big possibilities of help in different internet fora, for those who choose to create similar applications in the future. The main part of the project var the use of real-time information from the car?s on board diagnostics.

The aim of this report is to give a picture of how attitudes and behaviours of owners of environment cars look like and how they can be influenced. The alignment lies on environmental cars which run on biogas and ethanol which both are renewable fuels. The starting point is to sort out if it is environmental thinking that controls the choice and use of an environmental car. The feeling is that there are many other factors that can be more controlling, for example the price and the quality of the car. The result of the questionnaire survey which is the foundation of the report shows however that those who buy an environmental car do it mostly because of environmental reasons.

District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

Combustion of fossil fuels is today the dominating source of energy. During combustion,carbon dioxide is formed. The carbon dioxide accumulates in the atmosphere,which raises the global average temperature on earth through the so called greenhouseeffect. The only way to reduce the emissions of carbon dioxide from combustionin a coal fired power plant is through carbon capture and storage (CCS).Post-combustion capture is a technology to separate carbon dioxide from the uegas after the combustion for efficient transport and storage. The steady state operationof coal fired power plants with post combustion capture has already beenthoroughly investigated on a pilot scale, however much work remains to investigatethe plants dynamic operation.

The purpose of this study has been to evaluate whether a Low temperature bio-mass dryer could be integrated with the local district heating system in Malå. The aim is to increase the thermal efficiency of the cogeneration plant in Malå, by lowering the temperature of the cooling medium. Another benefit that comes from this is improved combustion efficiency at the power plant, since drying the fuel causes an Increase of the heating value.Simulations has been made in Excel, and with use of linear regression, to find out if it is profitable. Data for this purpose has been supplied by the power company Skellefteåkraft and furthermore SMHI.The result of the Calculations shows that a very efficient bio-mass dryer is needed, if yield of investments should be made possible. An Investment of 4,27 Mkr, in a dryer, could at a such criterium return 60000 kr/year, if the price of the biomass is 190kr/MWh.

The objective of this M. Eng. Diploma work was to validate the new version, CASMO-5M, and compare the results with CASMO-4E, by using the same input in both programs. The tasks that were included in this work was to compare TIP-measures, k-effective curves (warm), k-effective curves (cold), the effect of void on k-effective, the isothermal temperature coefficient (ITC), the moderator temperature coefficient (MTC), damping ratio calculations, internal effect in a fuel bundle of a BA-rod, the speed of BA-out burn, impact of xenon, falling control rod, margins and isotopes.The TIP-measures showed that the differences were small for all reactors, at most, 6% nodal improvement by C5M (Casmo-5M) for Oskarshamn 3. The warm measurements of k-effective showed that C5M had a higher value for all cycles of Oskarshamn 1, 2 and 3 in comparison to C4E (Casmo-4E).