Sökresultat:
13761 Uppsatser om Order Lead-time - Sida 4 av 918
Produktivitetsanalys ur ett LEAN-perspektiv : En studie hos OPPC, AstraZeneca
The objective of this thesis is to map the resources and methods used at the department OPPC, at AstraZeneca, and derived from that give suggestions on possible solutions that will increase their productivity.Mapping of the product flow, as well as gathering of process data, has mainly been done using observations, but consultation with the process technicians has also played a great role. Further have theoretical methods been used, based on literature studies, within the areas of Lean production and statistics.The work has incrementally gone forward since the steps taken has been restricted by the irregularity of production which led to the need of creating a fictive production flow. This has affected the lead-time calculations in the way that they are meant to give an indication, rather than an absolute truth, on how different methods described shall be used.The current state analysis showed multiple areas of improvement when defining capacity as value adding time in relation to total throughput time. Using the "standard scenario" as a basis showed that the actual production flow only constituted 50% of the total project time. Further it showed that the workflow contained more non-value adding activities than value adding activities, which is a result of how the work is distributed within the department as well as in the different projects.
Genomarbetade förfrågningsunderlag medför tids- och kostnadsbesparingar : En studie över handlingars påverkan i byggskedet
In order for construction projects to be completed within the specified time limit while at the same time be financially sustainable it requires thorough preparation and an extensive planning. Most essential is the groundwork and the design that determines the project's progress. There are many aspects to consider in order to avoid inconveniences such as delay, litigation, unexpected cost etcetera. If mistakes are made in an early stage it is very likely that the error will follow the process and become an expensive correction cost towards the later part of the project. In other words, it is expensive to rectify defects later on.
Diskontinuerliga Galerkinmetoder för initialvärdesproblem och prissättning av optioner
Efficient numerical methods for option pricing is an active field of research. This project has the goal to examine possible ways to improve an established method of numerical pricing. The method is based on an adaptive finite difference method in price and uses the backwards differentiation formula of order 2, BDF2, in time. The project will focus on improvements to the time integration through implementation of discontinuous Galerkin methods, dG. Empirical convergence and accuracy results are obtained for equidistant dG-methods up to order 3 and performance is compared to BDF2.
Effekter av ett informationsintensivt material- och produktionsstyrningssystem
We were assigned to do this master thesis by Husqvarna AB who at the time for this thesis just had implemented a new material and production planning system called Replenishment system. Husqvarna AB wanted us to examine the effects of their new planning system to see if it was profitable or not. Husqvarna AB had for a time considered their delivery and supplier service to bee their biggest problem and they wanted to solve this problem by improving the communication with all involved actors in the logistic chain, which they hoped would result in a better mix of products in their warehouses. The aim of this report was therefor to analyze eventual effects for Husqvarna AB when changing from a traditional material- and production planing system to a more information intensive one. The result of this report showed effects on decreasing administrational routines and improved flexibility and lead-times.
Riskbedömning vid Saltvikens kopparverk
AbstractAt Saltvikens copperindustry, which is located in the municipality of Oskarshamn, copper was refined from sulphiteore some hundred years ago. The ore underwent several steps in the process before the final product was received. These steps all had an influence on the environment through discharge of heavy metals. The area where the copper industry was located is today considered to be of specific national interest due to its valuable nature and cultural values, as well as its value for recreational outdoor activities. Therefore, it is important to determine the present level of contamination and if any transport of contaminants have occurred, and to identify the risks that are associated with the site both at present and in a longer time perspective.Thirtynine soil samples and 16 sediment samples have been analyzed.
Banktjänstemäns uppfattningar om vad revisorer ska göra
The aim of the study is to describe and analyze bank officials' views about what auditors will do. The main motivation comes from the government?s proposals that the audit duty will be abolished and it can lead to that bank officials in a bigger extent can influence the audit?s formulation. It can also lead to that a consumer audit becomes reality. The study covers a sample of 302 bank officials where 153 have participated through a survey questionnaire.
Trimning av lead och lag filter
The work describes the development of an adjustment algorithm that will replace today?s manual adjustment of Lead- and Lag-filters at ABB Robotics industrial robots. The adjustment is mainly for the filter parameters in the control system.Three different algorithms have been created to replace the manual adjustment. One of them is based on the criterion from the manual adjustment and another one on optimization of the sensitivity function. The last one is a combination of the two.The report describe the development of the algorithms and how they behave during simulations and tests on real robots.
Vad är ett lyckat projekt ur ett intressentperspektiv? : En studie av Trainee in TIME
AbstractThe concept project is today used in several contexts and has different meaning in different contexts. Lately, projects have been seen as a form of organization and more companies convert from traditional organizing to organizing in a project form. The purpose and focus of today?s project is not only to increase quality and competence development for management but also to integrate different actors in order to e.g. increase customer value.LänsTeknikCentrum AB (LTC) in Jönköping is running different projects in order to support companies in Jönköping County.
På tu man hand : Pedagogers uppfattningar kring arbetet med elever i behov av särskilt stöd
The purpose of this essay is to describe the organization of the Swedish Animal WelfareAgency during the time it was in operation. The Swedish Animal Welfare Agency was established in 2005 by the government who saw it as necessary in order to strengthen the protection of cruelty to animals in Sweden. However, the agency was shut down already in2007 and its responsibilities as an agency was moved back to the government and the department of agriculture. During its time in operation, the Swedish Animal Welfare Agency, received much criticism, among other things because of its interpretations of the law which were seen as too focused on details and thus ?bureaucratic?.
Medborgardialog i ortsanalys : ett arbete om värdet av kommunikation tidigt i planeringsskedet
Citizen participation is fundamental in place analysis, where the aim is to define the sites specific character and identity. The local citizens know the village better than anyone else since they lead their daily life in the environment. I have in cooperation with Sala municipality suggested guidelines on how to involve the local people in dialogue during place analysis. The target was to involve and enthuse as many people as possible with relatively small resources in time and money. The suggested methodology was tried out in a place analysis of Västerfärnebo, a community with about 3 000 inhabitants of which 500 live in the main village.
Hur används historia? : en historiebruksanalys av gymnasiets läroplan i historia 1970-2011
A new curriculum, entailing news for teachers as well as students, was implemented in 2011. Among other things History has been given a more prominent position in that every student will now study the subject. Can this decision lead to history being used more in the future?The aim of this thesis is to study the new curriculum, Gy11, as well the Lpf94 and Lgy70, based on Klas-Göran Karlsson´s typology where the use of history is divided into seven different categories. I will analyze the curricula, looking at what different uses of history that can be discerned as well as what changes have been made over time.
Kundorderstyrd tillverkning ? Påverkande faktorer, förutsättningar och problem : En övergripande studie om hur små och medelstora företag flyttar kundorderpunkten och går mot mer kundanpassning.
This study presents a holistic view of which factors small and medium-sized enterprises (SMEs) have to consider, in moving their customer order decoupling point (CODP) further from the customer, thereby becoming more customized. The study also investigate whether SMEs and larger enterprises differ in the strategic questions relating to what influences an enterprise to become more customized, which prerequisites are required and which problems enterprises should anticipate and prepare for. These questions are important, given that strategic change is challenging, and can take considerable time to accomplish; it therefore needs to be based on the right decisions. This study is motivated by the fact that the markets SMEs are selling to tend to become more and more complex and harder to anticipate. Increased globalisation and use of IT and ICT have lead to greater uncertainty in customer demand.
Lagerhantering i framtiden på Aero Materiel AB
In recent years, increasing emphasis has been placed on streamlining the supply chain. Keeping inventory and warehouses is considered to be a waste of resources. It is however difficult to completely eliminate the need for inventory and warehouses in a supply chain. The purpose of warehousing is to provide a service for the customer. By keeping what the customer demands in inventory it is possible to make a quick delivery when a need arises.
Hur främjas läsutveckling? : Fem pedagogers tankar om hur de arbetar för att stödja elevers tidiga läsutveckling
A new curriculum, entailing news for teachers as well as students, was implemented in 2011. Among other things History has been given a more prominent position in that every student will now study the subject. Can this decision lead to history being used more in the future?The aim of this thesis is to study the new curriculum, Gy11, as well the Lpf94 and Lgy70, based on Klas-Göran Karlsson´s typology where the use of history is divided into seven different categories. I will analyze the curricula, looking at what different uses of history that can be discerned as well as what changes have been made over time.
Jämställdhetens inverkan på föräldrars tid med sina barn
One purpose of our study was to investigate if equality in work time and parental leave in a relationship affect the time that parents spend with their children. Our first hypothesis was that increased equality in work time and parental leave leads to a reduction of the parents? total time with their children, ie the children spend more hours in pre-school and begin pre-school earlier. In order to test our hypothesis, we investigated the relationship between the woman?s and the man?s work time and parental leave and the time that the children spend in pre-school as well as at what age they began pre-school by using two surveys.Our study showed a significant coherence between both working women?s work time and the children?s time in pre-school as well as women?s parental leave and the children?s age at start in pre-school.