Increased trade and exchange within the European Community has brought with it the need for less restricted circulation of judgments. The situation has improved greatly due to the enactment of Regulation (EC) No. 44/2001 on jurisdiction and the recognition and enforcement of judgments in civil and commercial matters (the Brussels I Regulation).Despite recent improvements the proceedings are still time-consuming and difficult. Many creditors refrain from having judgments recognized and enforced as the proceedings cost too much time and are too time-consuming. On January the 21st 2005 a new Regulation entered into force, Regulation (EC) No.

The main purpose in this degree thesis is to investigate changes in performance when introducing a newly produced Real-Time database in one of CC Systems products, the Diagnostic Runtime Engine, DRE. The thesis is a collaboration between CC Systems, creator of DRE, and Mimer AB, developer of the Real-Time database.The result reveals that the time spent on database access is considerably lesscompared to the originally used database. The research has lead to several additional requirements on the real-time database and these are presented as part of the result in this thesis. The additional features will help making the product more suitable for DRE and similar applications.Additional research is required to be able to recommend the use of this product or not. Primarily the performance in another operating system, Windows CE, but also the introduction of additional features should be investigated.

Åfors glasswork was a company which started in 1876 and closed in 2012 due to the bad economical situation in the company. After its closure, the glasswork left behind contaminated soil with different concentrations of heavy metals such as, arsenic from arsenic trioxide, a chemical used to remove bubbles during the melting of glass, and lead oxide, a chemical used in the production of crystal glass. Crystal glass?s production occurred under 1921-1971, but emissions of lead into the air from Åfors glasswork continued until 2011, because of the artist Bertil Valliens? artglas was made in Åfors glasswork from 1970?s and onwards.The aim of this study was to estimate how much lead (Pb) and arsenic (As) that were released by Åfors Glasswork into the atmosphere during the operational period of the glasswork in comparison with how much of lead and arsenic were purchased for the company. Added to the assistance of the data from National Archives the variations in the activities of Åfors glasswork could be shown.

This Master Thesis is a part of PlymoVent?s business to customer plot, with the aim to investigate how the consumers receive the services that PlymoVent provides. With regard to PlymoVent's business strategy and reference theory, the demands of how to receive and monitor a supply chain for a better customer satisfaction where targeted. The findings refer to poor customer satisfaction due to obscure procedures in problem resolution and discrepancy handling, and vague transportation accuracy..

Inventory management is a key part of a company?s logistics function and is of great importance to companies as it is a substantial cost. It is of high importance for a company to make sure that the warehouse is efficient as possible. In this thesis two factors that hurt a warehouse?s efficiency are introduced; inventory inaccuracies and lead-time variations.This thesis has been dedicated to analyze how inventory inaccuracies and lead-time variations arise and how to eliminate them.To be able to solve this question we have used a qualitative research method.

The purpose of this study is to examine whether there is any connection between working hours, desired working hours and the worker ?s health. The study also aims to investigate if there are any differences over time. Earlier studies have shown that individuals need a balance in their life between worked hours and free time. This balance seems to be important for employees if they want to lead and remain a healthy lifestyle.

Reinforcement is of great importance to fulfill the dimensioned strength of a concrete construction. This requires that the work needs to be carried out with adequate results that neither endangers the workers or the safety of the construction. Progressive development of the planning phase, construction documents, and construction methods is in constant need since the technology constantly evolves.In order for contractors to be able to get acceptances from their quotations requires that they have to increase their working pace in order to be able to leave a quotation with a lower price than the competition.Due to the increasing pace the different parts involved in the construction process is subjected to time pressure. The design stage, construction documents, work preparation and the execution are all affected when everything has to be finished quickly. To avoid problems, it is required that all parts are able to deliver good quality solutions and results under the influences of time pressure, which is not always easy.

In this project, we are studying the material flow and the information flow of sample materials and the appurtenant report of deviation for the purpose to be able to suggest better solutions. The sample material, which is to be analysed, is to be continuously taken from the production flow. The purpose is to navigate the process by the results found by the analysis. Because of this, it's very important that both methods of analysis are ensured and that the sample material is representative for the production flow. However, even more importantly, is that activities and transportations, combined with both flows, must perform in a quick and correct way in order to maintain or improve Höganäs AB's competitive strength.According to reports are about 20 products per day not available, for loading, at the time of delivery.

This report is a master thesis performed by Adam Lundin at the company Sandvik Coromants production facility in Gimo. The work started in January 2013 and went on for the duration of 20 weeks, which is equivalent to 30 hp. The project was executed at the department GVR10. The scope of the project was to create a base for improvements in the purchasing process of direct material to the production. The background to the project was that the centralized purchasing department has gone through changes and decision was taken to decentralize the purchasing of direct material to Gimo.

The purpose of this scientific essay is to evaluate if a continuous glucose monitoring system is something that can benefit Swedish animal health care. The study investigates if it is medically possible to use continuous glucose monitoring systems on dogs with an apparatus attached to their bodies. Furthermore, I try to establish whether this is possible in practice and how it could be done. The keywords used were diabetes mellitus, insulin, continuous glucose monitoring, blood glucose monitoring, dog, pet owner and animal nursing care. Furthermore, I wanted to find out if this system could be an alternative to currently established methods to measure the patient?s blood glucose level.

The aim of this study is to investigate how employees in consulting companies develop their competence in order to perform their daily work. The focus is on informal competence development. The theoretical framework consists of theories concerning learning and competence development in working life, theories on organizational change and evaluation, a well as professional reflection. The methods applied are narrative research and interviews based on the assumption that knowledge about reality is only obtainable through language and communication.The main results show that competence is developed through experience, social interaction, communication and dialog with co-workers and customers. The post-modern conceptions of the rapid (technical) development and need to be up-to-date has a strong hold on the informants apprehension of working life, as does the notion of not having enough time for all the competence development they would like.

X-rays are a potential risk for animal health care personnel. The present study will examine the risks for scattered radiation to the personnel, if no lead gloves are used when holding an animal during the x-ray examination. Furthermore, how the impact of the exposure values and body parts examined, affect the scattered dose to the hands of the holder. Also, the distance between the animal and the hand that holds it was evaluated to see the impact on scattered radiation exposure. Tested by a survey, to animal health care students, the frequency of the usage of lead gloves in Swedish animal hospitals was studied. According to the results from the analysis, animal health care personnel don't need to use lead gloves every time they hold an animal or a cassette during x-ray examinations.

To increase the quality in their products ABB is working towards a cleared order concept. That means that all customer specified options are to be known before they start with order calculations and construction. As it is today they use paper checklists to achieve this. One order may have several reactors, and for a reactor there can be several different alternatives. For each alternative a new checklist must be filled out.As of today all reading of the customer specification and checklist fill in with is done by hand by different persons, and sometimes the same data is read more than one time.

This study was made for the round wood transport company MT Transport AB. Time studies were made in order to analyze time consumption on the mill site for timber trucks delivering round wood at the Södra Cell Mörrum mill. The most interesting was to see how much of the time spent at the factory that was waiting time. In three weeks the study was going on and the drivers were clocking it themselves..

In hydropower plants it is necessary to always have local power supply. Therefore, the plants are equipped with batteries as stationary back up power. Vattenfall Vattenkraft is using lead acid batteries but has been investigating alternatives to replace them. The aim of this study is to investigate the potential of using Li-ion technology as back up power.The study showed that Li-ion batteries have many qualities. The Li-ion technology will decrease the space and maintenance demand.