Pet rabbits are increasing in popularity and the owners want the same treatment for them as they would want for a dog or a cat. However, the knowledge among clinical staff about these small animals is not always up to date. The aim of this paper is to highlight the needs of the pet rabbit and how these can be met regarding veterinary nursing. Pet rabbits are different from dogs and cats in several ways and their needs as patients differ as well. Rabbits are herbivorous prey animals. To avoid predators, they are very reluctant to show any sign of weakness for as long as they can.

The development of quantitative, real-time PCR (qPCR) combined with the mapping of the canine genome opens new possibilities in veterinary medicine. This method provides a quick and accurate quantification of the expression of a specific gene at a given point in time and thereby also information of how the gene expression for a certain protein is influenced by various conditions and diseases. One possible area of application is identifying bio markers for cancer. Recently the protein serglycin (the core protein of an intracellular proteoglycan) was found to act as a selective marker for the disease acute myeloid leukemia in humans (Niemann et al, 2007). Serglycin is produced by most hematopoietic cells, although mast cells account for the largest amount of serglycin.

AbstractThis study examines factors in school that could contribute to or counteract the experience of inclusion of persons who have been diagnosed in the field of autism spectrum disorder. The information was gathered through qualitative interviews and processed to be presented in the results.The results show that respondents found it difficult to concentrate when in school because of the environment. They experienced no coherence in learning situations, they may not get answer as to why information should be carried out and saw no point to have breaks. Furthermore, they experienced no problems to orientate in school or to follow the schedule. The results also revealed that the respondents had at least one teacher with whom they felt that the relationship was positive.

At the Division of Electricity at UppsalaUniversitythere are ongoing researches, including a research concerning turbo generators.Turbo generators produce a large share of electricity in the world; however they are costly mainly due to the fact that the cooling and ventilation that are needed to eliminate the excess heat from the generators are expensive. Turbo generators work with high efficiency and in this project, the main task is to simulate a generator while taking into account that the generator must be designed against self-oscillation, centrifugal force, exhaustion and heat. The turbo generator must be simulated without being too expensive and complicated.In this project, the dimensions of the turbo generator depend on the efficiency of it, and where the losses are in the generator. Furthermore, the Optimum values need to be chosen with the help of the ACE simulation program. The report begins with an introduction describing the project followed by a task description that is dealing with the project.

This thesis within the field of Integrated Product development at the Royal Insitute ofTechnology, performed at Primary Development Dishcare at AB Electrolux, is supposed to finda solution to enhance the hygiene inside an Electrolux dishwasher. The outcomes of this thesisare functional prototypes to evaluate the efficiency of disinfection by the use of Ultra VioletLight and Ozone.The thesis has followed Electrolux Primary Development process, with delivarables andcheckpoints.Ultra violett light with a wavelength of around 264 nm penetrates through the cell wall ofbacteria and micro organisms and causes a molecular rearrangement of the cells DNA. Thisprevent the bacteria from reproducing and it is considered dead. Commonly used UV-C lampstransmits the wavelength 254 nm which is very close to the Optimum for germicidal action.A competitive brand have reacently launched a dishwasher claiming to achieve greaterdisinfection with an UV feature. This dishwasher was tested during the thesis and proven tohave a very low effect on the hygienic result.Two prototypes were devolped and tested for UV disinfection of dishware.

A secondary and a pioneer tree species can with advantage be included in a mixed stand to increase the use of sunlight. Nitrogen-fixing plants have been shown to increase the supply of nitrogen in the soil by, for example, litter fall. This deposition acts as a biological fertilization, which may be used by non-fixing plants. Alder is a nitrogen-fixing, pioneer tree species that loses its nitrogen-rich leaves late in the autumn. The aim of this study was to examine the effect on the total volume of production, when different proportions of nitrogen-fixing Alder were part of spruce stands.

Background: Many companies have outsourced their IT-operations and their expectations of what this IT-outsourcing will contribute to the business are high. Cost cuts are not always a natural outcome of IT-outsourcing. Many companies that have outsourced their IT-operations consider it to be problematic and complex to exercise management control and reach cost control which was the purpose of the IT-outsourcing. Purpose: To describe and analyze what affect IT-outsourcing has on a company?s management control system and a company?s possibility to exercise cost control.

The aim of this report was to investigate the economy of passive houses. The work was focused on economy in total and on the economy of different components such as windows, insulation, heat exchanger and the air tightness of the climate shell. No attention was paid on the comfort factor or to the impacts on the environment.Two houses, aspiring to be passive were chosen; A big one and a small one. Hence, comparisons considering the size of the building have been possible to do as well.The comparisons were made by calculating ?break even? between two concepts; passive and BBR- concept.

GKN Aerospace Sweden (GAS) utvecklar och tillverkar motorkomponenter för både den civila och militära flyg-och rymdindustrin. En av produkterna som GKN tillverkar är en outlet guide vane(OGV), vars funktion är att omdirigera det axiella luftflödet från fläkten. OGVn är den mekaniska länken mellan kärnstrukturen och fläkthuset. Ett viktigt mål är att minska vikten på motorn samtidigt som dess diameter ökar när motorerna blivit allt större.For att lösa detta krävs ett material med hög hållfasthet i förhallande till vikten. Ett examensarbete som föregår detta har utvecklat ett koncept som innefattar en OGV i en viss GKN-utvecklad tekonologi.

Sand pits are a valuable habitat which can hold many sand living species including several endangered ones. As many sand habitats with exposed sand are declining, sand pits have a potential as a substitute habitat. This study was conducted to see what effect the area of a sand pit has on species number and composition of ground beetles (Coleoptera: Carabidae). Also, the effects of other environmental variables were tested, for example the proportion open sand, vegetation cover, sun exposure and tree cover. The study was conducted in the county of Uppsala in 2008 and included 13 sand pits with areas between 200 and 180,000 m2.

Biogas is a renewable energy produced through anaerobic digestion, which means that organic matter is degraded by microorganisms under anaerobic conditions. The produced biogas can then be used for cogeneration, electricity, heat or upgraded to vehicle gas. Eskilstuna Energy & Environment AB has four digesters at Ekeby water sewage treatment plant, Eskilstuna. One of the biogas reactor (RK4) is equipped with a jet-mixing system while the remaining digester uses top-mixing. The mixing system is an important parameter to achieve Optimum operating conditions for the process regarding gas production and degree of digestion.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

Noterade bolag som står inför investeringar behöver besluta om vilken finansiering som skall väljas. Finansiering genom eget kapital, skulder eller en blandning av dessa utgör ett viktigt val för ett företag. Ett bra beslut kan medföra en lägre kapitalkostnad, en bättre ägarstruktur och mindre risker vilket i sin tur medför en högre trovärdighet och lägre räntor. Å andra sidan kan ett sämre beslut medföra att företaget betalar ett högre pris för sina skulder, samt att företagets fortlevnad och trovärdighet ifrågasätts. Studien har avgränsats till tio bolag i Sverige sett till bolagsvärde, exkluderat banker och finansinstitut.

Fast pyrolysis is a method for converting biomass into three energy rich products: char, gas and bio-oil, where the latter is most interesting.  Pyrolysis is an endothermic process where biomass is heated in an anaerobic environment and, with the right operating conditions, up to 80 %wt bio-oil can be extracted. Key parameters for fast pyrolysis are: stable reactor temperature (~500°C), short residue time for gas in the reactor (<2 s) and a very high heating rate for the biomass. Today there are several different process solutions for fast pyrolysis, where fluidized beds and rotating cones are most developed. Bio-oil has compared to fossil oil: lower heating value, low pH and also polymerizes with time. Because of this upgrading is desirable for increasing competitiveness.