To produce fine fibre wool as a complement to lamb meat production, Merino and Svea sheep are currently being crossbred in the county of Jämtland. The aim of this study was to evaluate growth and wool quality of the first crossbred lambs. In addition, a literature study about nutritional effects on wool production has been carried out. The literature study showed that fine fibre wool should foremost be achieved through directed breeding. Nutritional requirements of the sheep at different stages of production should determine their feeding.

Syfte: Syftet med studien var att, med hja?lp av Optical Coherence Tomography (OCT), underso?ka om det finns na?gon skillnad i central och perifer retinal tjocklek mellan olika ametropier.Metod: Studien omfattade 36 fo?rso?kspersoner, som grupperades beroende pa? ametropi i en myop, emmetrop och hyperop grupp. Av de 36 fo?rso?kspersonerna var det 15 myoper, 15 emmetroper och 6 hyperoper. En inledande ma?tning gjordes da?r fo?rso?kspersonernas objektiva refraktion uppma?ttes med autorefraktor och da?refter gjordes en avsta?mning i provba?ge fo?r att sa?kersta?lla refraktionen.

The EU-project HEALTHGRAIN has suggested a new definition for whole grain which allows a small part of the grain to be removed during processing. By removing the outer part or the grain the hygienic quality will increase but it is not clear how the taste and colour is affected. So therefore in this study three different debranning methods, peeling, pearling and polishing, which remove the outer parts of the grains have been used on common and durum wheat. The dietary fibre and ash content, as well as germination was analysed in untreated, peeled, pearled and polished grains. The decrease in dietary fibre and ash was higher in grains that had been pearled compared to those that had been peeled or polished.

In conventional viscose manufacturing, a large amount of carbondisulfide is consumed. This amount has to be decreased to keep the production cost down and to reduce the environmental impact. The purpose with this work was to show if an enzyme treatment of a dissolving pulp could increase the degree of substitution in the viscose so that the amount of carbon disulfide consumed in the process could be decreased. Previous investigations by Kvarnlöf (2007), Engström et.al. (2006) and Henriksson et.al.

In a multi-year project at Swerea Swecast AB studies on influence of dissolved gas on inclusions have been made. The knowledge about these parameters could be used to increase the quality of the final steel casting. The purpose of this thesis was to closer examine the impact of the oxygen level on inclusions.The questions asked were:? What was the amount of inclusions at different levels of oxygen?? What was the size of these inclusions at different levels of oxygen?? What does the inclusions consist of at different levels of oxygen?This was studied by measuring and sampling, sample preparation and microscopic analysis using an optical microscope and a scanning electron microscope (SEM). Measurements and sampling was performed at Smålands Stålgjuteri AB in Eksjö and at Swerea Swecast AB in Jönköping.

Hemp is an ancient cultivated plant that came to Sweden in the 1st to 2nd Century and was particularly interesting for use for food, clothing and building materials. Over time, other applications have been developed for hemp, e.g. in energy and health products. Interesting new uses for hemp continue to be identified and this fascinating plant has incredibly versatile applications.In this project, seed production of industrial hemp in Sweden was studied and evaluated. Five different methods are described, four of which are proven under Swedish conditions.

Sweden's drinking water quality is considered to be high partly due to a high quality of the raw water and a well developed sewage infrastructure. Despite this, there is water contamination that could be prevented by installation of a sophisticated early warning system. Some of the major players in the production of drinking water have already invested in different types of early warning systems to ensure drinking water of high quality. There are various forms of early warning systems where automatic monitoring of E. Coli is an interesting alternative.

The system tungsten-oxygen has potential of being suitable for decorative coatings since ceramic coatings are often hard and wear resistant, and since modulations in oxygen content or incorporation of small ions could give bright colours. The aim of this report was to investigate the relationship between process parameters and  the properties of the films, with the wear resistance being of special interest.Samples with tungsten to oxygen ratios in the range of 100:0 to 25:75 at% were made using reactive sputter deposition, either with constant gas flow, or gas flow controlled by optical emission of the plasma. The hysteresis of the system, which means that a certain gas flow will cause different pressure and/or target voltage depending on in what way the flow is reached, makes it interesting to control the process where the system makes the steep change from metallic tungsten to ceramic tungsten oxide. This is difficult and thus requires precise control equipment.The samples were analysed using X-ray diffraction, X-ray photoelectron spectroscopy and an empirical wear test suitable for small components like cell phone cover for example, in order to characterize the structure, composition and wear resistance of the coatings. The results could be divided into three groups: (I) tungsten-like, with very low oxygen content; (II) mixed phase and (III) tungsten oxide like, with oxygen content close to 75 at%.

This work of examination describes an environmentally oriented product development aimed to develop new packaging with improved environmental and sale aspects of the products from Primus Sweden AB. The report covers the design process from the first collection of facts to the final results with a description of all methods involved in the work. The focus has been on a clear environmental awareness and the report contains a deepening of the concept life cycle assessment (LCA) for product development. In the process, the consumers? opinions of the brand Primus and environmental profiling formed the basis for the packaging to communicate the right values such as quality, technology, environmental awareness and adventurer?s first choice.The deepening of the life cycle analysis shows that composting and other alternative treatment of the biological cycle is not possible to implement in a satisfactory way in the design process.The work results in two final concepts.

When grains of wheat and rye are conventionally milled, large quantities of bran classified as by-products are left and are mainly used for animal feed. Bran is a complex material composed of the aleurone layer, nucellar epidermis, a seed coat, a fruit coat and a small proportion of the germ and endosperm depending on extraction rate. The bran fraction consists of approximately 40-50 % dietary fibre which can contribute to increase the nutritional quality of human cereal food. It would also be valuable for the food industry to convert by-products as bran to products with higher commercial values. The aim of this thesis was to analyse the content and composition of dietary fibre of heat treated wheat and rye bran according to the Uppsala method with some modifications in order to analyse soluble and insoluble dietary fibre separately. Half of the bran samples were precooked, dried and roasted and the other half dried and roasted (uncooked).

Within literature, politics and science, there is a claim that ?tree avenues are important?. But the question and the goal for this essay are to explore the pretext to how and why. Planting tree avenues is a 4000 year old tradition and they are a common element in the Swedish and Scanian landscape since the 18th century. They were first mainly planted by aristocratic land-owners or on their initiative, but since the 19th century also by farmers.

Sweden's drinking water quality is considered to be high partly due to a high quality of the raw water and a well developed sewage infrastructure. Despite this, there is water contamination that could be prevented by installation of a sophisticated early warning system. Some of the major players in the production of drinking water have already invested in different types of early warning systems to ensure drinking water of high quality. There are various forms of early warning systems where automatic monitoring of E. Coli is an interesting alternative.

This master thesis investigates quality procedures and measuring of solid carbide end mills, with the main focus on measuring equipment. The thesis has been written in collaboration with a special production department for solid carbide end mills at Sandvik Coromant in Gimo. The department?s needs and constraints have been the foundation of the project and the main research question is: how to measure end mills in order to ensure good quality of the produced end mills. The project has contained both a theoretical study consisting of a literature review and practical studies in the workshop with the objective to identify an end mill?s main parameters and the relationship between an end mill?s geometry and the manufacturing processes.

- To be trapped in a roller-coaster That ?s how some of the patients are describing the situa- tion of living with heart failure. To be stuck in their home not knowing if they will have to seek care today and not knowing if they will have the energy to attend that birth- day party later this week.Each year 2-3% of the Swedish population are diagnosed with heart failure, which results in 30,000 new individu- als with the disorder. Cardiovascular disease is rapidly in- creasing in the world and before 2030, people with heart failure will increased by 100%. Our improved living condi- tions and better health have allowed us to grow older and made us more dependent on other types of care, care at home.Today the patients are only looking for changes in weight and if they have excessive water in their body.

The master thesis ?Mechanical Integration of an IR-detector in a Micro Cooler? has beenperformed at FLIR Systems AB in Danderyd. FLIR Systems is a world leader in the design,manufacture and marketing of thermal imaging camera systems.The thesis project is divided into to two areas, Production Method and Noise.The Production Method concerns the positioning of a detector on the cold finger within the IRcamera.The detector has to be positiond with very high accuracy at the center of the cold finger,so it can be placed in line with the optical axis to avoid movement of the picture during zooming.The positioning of the detector is at present done with the help of specially designed guides on aplate on top of the cold finger. The design workes well but the special machining needed for thisplate is very expensive.The goal concerning the production method was to derive a new more cost effective method forthe assembling and positioning of the detector on the cold finger by replacing the guides on theplate with a reusable equipment or some other alignement operation.Several concept ideas have been generated with the help of concept generation methods in theform of concept classification trees and concept combinational tables. Two of these conceptswere selected to be further refined.