This Degree project summarizes how it is to work in the CAD program Revit Architecture. This was done because AQ Arkitekter in Eskilstuna is interested in how Revit works. Especially compared to AutoCad which is the software they are using today. Will their work become more efficient with the new software?The starting point was to find out how it is to work with Revit when you only used AutoCAD Architecture before.

Most of the saw and pulp industries have stored wood nearby their production, the main reason is to have a continuous wood flow to the production. Wet storage of wood is of great importance to keep the wood quality. Without water sprinkling the risk of drying outand decomposition through biological activity increases significantly and will result in a negative effect on future production and quality. One drawback of wet storage of wood is the leaching of chemical substances into the surrounding recipient. The log yard run-off contains phosphorus, nitrogen, phenols and organic substances. These substances can cause problems for the surrounding environment. The main objective of this project is to gain an understanding of the wet storage used by the Swedish wood industry and estimate the environmental consequences that run-off water will have on the recipient.

Denna rapport jämför ett kommersiellt site survey-verktyg med ett open sourcealternativ.En site survey är processen att planera och implementera ett trådlöstnätverk. Det är viktigt för att undvika problem med täckning, störningar samtplacering och konfigurering av accesspunkter.För att göra jämförelsen har en metod utvecklats för att jämföra site survey-verktyg. Metoden tar upp och jämför olika kriterier i form av verktygens förmåga att hantera signalstyrka, störningar, quality of service, manuella site surveys, virtuella site surveys, dokumentering av resultat samt verktygens förmåga att underlätta vid placering och konfigurering av accesspunkter. Förutom detta tas även mjukvarornas gränssnitt och användarvänlighet upp. Metoden skulle dock kunna utökas ytterligare för att innefatta t ex säkerhet, inlärningstid och support, för att på så sätt bidra till en bättre jämförelse.De verktyg som har jämförts är open source-mjukvaran Kismet och den kommersiella mjukvaran InterpretAir.InterpretAir har visat sig ha en bättre funktionalitet på alla punkter och anses därför vara den mest lämpliga mjukvaran vid en site survey.

For centuries Islam and Muslims have been subject to islamophobic attitudes in the west. The purpose with this study was to see into the making of open and closed attitudes against Islam and Muslims from a conflict in southern Thailand, and also to so see if Muslims are portrayed as more violent than the Buddhist groups in the conflict. The aim of the study is also to see if Muslims fall into a violent stereotype. This was studied by looking at five Swedish newspapers coverage of the conflict, during a given time. To be able to look into this, two theories will be used, the first one is the Runnymede Trust theory, which is about open and closed attitudes against Islam and Muslims.

In this report a new gear concept is evaluated using the magnetic finite element method (FEM)software MagNet and Ansys as well as the mechanical FEM software Abaqus. The gear conceptis evaluated in terms of maximum torque capability, torsional stiffness, gear ratio and efficiency.ABB Corporate Research has proposed a new gear concept which should be less expensive thangearboxes used today. The new concept is called aMagnetic Harmonic Traction Drive and usesthe principles of a harmonic drive gear to achieve a high reduction ratio. The gear conceptreplaces the wave generator used in traditional harmonic drives with magnets and uses tractioninstead of gear teeth to transfer the torque. The main components in the gearbox are the magnets,the flexspline, the magnetic portion and the circular spline.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

Klättring är en växande sport som kräver jämn balans av styrka, teknik och psyke. I dagslägetsker klättertävlingar och de hårdaste utomhuslederna på branta överhängande väggar med smågrepp. God fingerstyrka är nödvändigt att ha när klättring utövas för att kunna hålla sig kvar igreppen, som består av lister, på väggen. Då dessa lister tas används en greppteknik somkallas för crimpteknik. Det går att hålla i listen i denna teknik med tre olika positioner, closedcrimp, open crimp och open hand.Syftet med denna studie är att kartlägga skillnader mellan olika test av prestationsförmåga ochcrimputhållighet, undersöka vilken crimpposition som går att hänga längst i samt utforskakorrelationen hängtid i crimp med styrkeövningar.Tjugotvå manliga klättrare rekryterades och indelades efter inrapporterat personbästa i tregrupper (elit, avancerad och normal).

Since the demands from authorities regarding lower energy consumption havebecome increasingly strict, this puts new pressure on designers and builders, who notonly have to ensure an esthetically pleasing building, but also make sure it issufficiently efficient to pass under new laws and regulations.This thesis takes into consideration a wide range of various parameters and theireffect on a building?s energy consumption. For this evaluation a computer softwarecomparison between the two programs Autodesk Ecotect Analysis and AutodeskProject Vasari was performed.Autodesk Ecotect Analysis is better suited for studies made on individual factors whileAutodesk Project Vasari is better used in experiments regarding the geometricalshape of the stucture itself.The results from the two different software tools used, give us both differences andsimilarities. For instance, both software programs produced the same resultsregarding the importance of the windows of the buildings to ensure a highly energyefficient building, both when it comes to the windows size and their U-value..

Laser scanning is a method of surveying that has evolved rapidly in recentyears. The technique is based on a laser scanner set up, which can document a structureusing pulsed laser beams. Each time the laser hits a surface it is partly reflectedback to the scanner that stores the point. By using strategically placed targets, storedpoints from different scans can be merged into a point cloud. A point cloud is avisualization of the scanned object with a very high accuracy.

"Speak up! I can?t hear you"This qualitative study is built on an investigation of a newly instated model that is used when building or renovating schools. The principles of the model are based on building schools with an open plan design where the walls are made of glass and the classrooms are not shut closed by walls, instead the classrooms are completely open except from screens that are used to indicate the ambit of the rooms. This model has been well debated and that is the reason why we chose to do this study.The purpose of this study is to find out how students and teachers experience this model. To do this we have done interviews and observations.

This report treats a Master Thesis performed at Scania CV AB. The task was to create a computer model of a hydraulic actuator system in the software AVL Hydsim. The system consists of two spring-loaded masses with surrounding hydraulic components. The purpose of the model is to study phenomenon and problems in the system, as well as to be a support in the development of the system. It is not supposed to be used to study absolute values in its current form.

In this report you can get a complete instruction about how to build your own development system for the PIC-processor. This card will be used for laborations for the students at LITH-ITN. With this card you can send new assembler codes (new instructions) down to the microprocessor via the Serialport on your computer. Then the new instructions for the microprocessor will start to execute. We made a solder paste stencil at Campus Norrköping solder paste stencil laboratory.

This paper describes the evolutionary development of an information system for a small company. The company performs overhaul of forklifts and cleaning machines. The company has already an information system that handles the reports from these overhauls but it needs a supplementary tool that assist the chief planner to plan forthcoming overhauls.It should be able to display coming overhauls in a timetable and eventually print them, either to a PDF file or to a document. The timetables this function produces will help the chief planner and the assemblers to get a good overview of their day-to-day work.The tool needs to be intelligent in that way that it takes into consideration were in the country different assignments will be performed. So that time consuming travels over great distances can be avoided.

The review of Integrated green spaces in urban areas ? A case study of inner Brisbane highlight the significance of addressing characteristics, qualities and landscape values in our outdoor environment. The importance of green spaces to the wellbeing of people in the city and the ecological, social and cultural values they carry are widely recognised in the field of urban and regional planning. At the same time population growth, climate change and urban development put planners and scientists in a challenging position where new solutions must be put on the agenda in order to accomplish sustainability. Open space strategies, collaboration between stakeholders, public participation, learn from earlier failings and a ?value-led? approach facilitate the managing of open space. Brisbane is located in the fastest growing metropolitan region in Australia. The city´s open space landscapes offer cultural, geographical, recreational, social and scenic amenity assets, which make a major contribution to the regions identity they a wide world known for.

This qualitative study investigates the conditions on the labour market for disabled people by examining which factors and processes contribute to disabled peoples inclusion to, or exclusion from the open labour market. Stigmatisation is also used as an analytical tool to better understand the exclusion of disabled people from the open labour market. The material to this study is drawn from qualitative interviews with the employees of the Swedish Employment Agency which specialises in supporting disabled people to find employment.  In conclusion, disabled people face several barriers which makes them more susceptible to become excluded from the open labour market. Such excluding barriers include a demand for high efficiency and productivity from employers, bigger cooperation?s and public organisations unwillingness to employ disabled people and prejudices from employers, especially against people with psychiatric disabilities. The employees of the Swedish Employment Agency suggest that they would be able to work more efficiently to help disabled people find employment if they had to do less administrative work, and would be able to work with fewer clients per employee.