The construction industry has demands on energy use in permanent buildings. How much energy that is permitted to use during the time the building is produced has no requirements. The purpose with this study is to learn how far Skanska has come with the work of making the building site more energy efficient.A literature study has been performed in the beginning of the study to survey what energy efficient arrangements that can be applied and how they operate. Using site visits and interviews the situations on the building sites have been studied as well as the energy efficient measure that are in use.Skanska has come a long way with the work of energy efficient building sites and they keep improving. They have improved half of their cabins so they use 50 % less energy.

In many developing countries, among them Vietnam, contamination of agricultural land is a major issue that has public health implications. A fast growing population, rapid urbanization and industrialization have led to air and water emissions of potentially toxic elements (PTEs), such as cadmium (Cd). Earlier studies have shown that individuals with low iron (Fe) and zinc (Zn) status absorb larger quantities of Cd than those of adequate nutritional status. The purpose of this study was to investigate and compare the Fe and Zn intake from the foods consumed by women (15-45 years) in selected households in two agricultural villag-es in the Red River delta in Vietnam. In one of the villages the residents were involved in metal (mainly Fe) recycling activity, whereas in the other village the residents had agricul-tural production as main source of income. Interviews, followed by food intake calcula-tions, were performed.

The number of elderly continues to increase in Sweden which puts pressure on the elderly care. Aproposed solution is to increase the use of information and communication technologies (ICT) inhome care to both streamline care and enable older people to manage on their own to a greaterextent. So far Västerås is the only municipality that has made a decision on an ICT solution, whichthey have chosen to call ?eHemtjänst? (eHomecare). The purpose of this paper was to investigatethe specific prerequisites and requirements for Gothenburg city regarding the potentialimplementation of eHemtjänst.

New high strength steels require improved cold rolling techniques. The aim of this degree project was to develop a new and money saving cold rolling technique to manufacture steel strip for saw blades. The work is based on earlier rolling experiments made with a high carbon steel grade at LuCoil Steel AB. The work also focused on the mill requirements to cold roll high strength steels. The results show that LuCoil?s existing cold rolling mill was actually designed for rolling low carbon steel.

This study's interest area loops around how it is possible to understand texts' leverage over human thinking and acting. Focus lies on understanding which forces that form people?s views around men and women's relationships and relations in the public room. From this perspective our interest is to explore how the phenomenon rape is expressed in texts and how we can understand how rape through these texts are to be shaped in individuals' thoughts awareness and. Finally, it is also relevant to create understanding for how rape as a discoursive practice can have effects on individuals and society.

The task of making a correct application for B- activities is the foundry time consuming task. Information and facts concerning your entire business activity shall be attached into a description of environmental consequences, which will be the basis for the decision making whether the activities shall be granted a permission to practise environmentally hazardous actions or not. When the Environmental Act were established 1999, the permission process became more extensor. With this study I want to give an insight about how these applications are made. The methods I have used to collect information are a study literature where the Environmental Act has been the focus, and qualitative interviews with two County Administrative Board. I used the Environmental Act to understand why permission is needed and the interviews to give me insight in how the work is done. My conclusion is that it is very unusual that an application is granted without complements.

The implementation of a material requirements planning system is a complex and demanding task. There has been much research into what factors are important in such implementations, but seemingly very little about the links between critical success factors and management control systems. This thesis attempts, through a case study, to answer the question of how management control systems affect the implementation of an MRP system in ASSA AB, a Swedish manufacturing firm. Data is primarily collected through interviews. Theory regarding implementation success definitions, critical success factors as well as management control systems is presented.

SAMMANDRAGDenna rapport är en del i ett examensarbete på byggingenjörsutbildningen vid Chalmers Tekniska Högskola. Som komplement till rapporten finns ritningar på idéförslag samt ett program som beskriver byggnadens nutida utformning samt kraven på en ombyggnad.I denna rapport utreder vi möjligheterna att bygga om den befintliga järnvägsstationen i Mellerud till ett modernt resecentrum, på uppdrag av Melleruds kommun. Rapporten behandlar flera olika grundläggande lösningarav utformningen. Med dessa som utgångspunkt utformas sedan de olika delarna i den bästa av de grundläggande lösningarna. Målet med rapporten är att utforma ett resecentrum som tillgodoser resenärernas behov.

A trend in modern landscape architecture is to design pedestrian streets so that vehicles and people move in the same area. By doing this, traffic tends to slow down. On the market though, there is a lack of furniture that corresponds to the requirements of these kinds of public places. Therefore, I have designed this furniture, called VOX, which is planned to be used on streets, schoolyards and squares. One objective has been to promote the product to the industry.To achieve this, I have been in contact with people from different professions, which have all influenced my designprocess.

The goal of this project was to make the requirement process at the Swedish Coastguard more effective. The first step to achieve this was done by locating bottle necks in the process with value stream mapping method. The result of this study showed that the biggest restriction in the requirement process was while examining older requirement documents to understand what elements were suitable for the particular project. This was followed by a study of literature, interviews and theory of Lean Production with the ambition to investigate how the requirement process was handled on other companies and how to improve the process on the Swedish coast guard. This led to a number of potential enhancements of the process which later was evaluated.

This thesis has the overall objective to develop the optimum sealing system between the retarder and transmission. Today, there is a pressure-relief and two radial seals separation between the retarder and transmission. It has been found that carbon residue formation may occur between retarder axle and seal lips with, in some cases, leakage as a result.We have in this thesis tried to explain the phenomenon of carbon residue, how it is formed and why it can be seen just on the seals? A rig test was conducted where we show how friction, speed, transmission temperature and mitigation phases of the retarder affects temperatures in the sealing environment. Factors affecting the coke structure are reported, together with proposals for measures that provide a mitigating seal environment.

This Master thesis discusses the development of a virtual human soft tissue object for use in exercise applications of various medical procedures.The soft tissue object to be developed shall look like, feel like and behave as living human tissue. It shall give the user a realistic feeling of weight, softness and roughness, and shall behave in a correct way for exercise purposes. The soft tissue model is to be used in a three dimensional stereo graphic environment with haptic feedback. A prototype for practicing the procedure of inserting a catheter is built. The prototype is used to evaluate the potential of the virtual environment for medical exercise applications, and to assess the realism and usability of the soft tissue object.

The purpose of this report is to simplify the process of designing carbon fiber strengthening for existing concrete constructions, specifically beams. The intention has been to establish a flow chart containing information on the necessary testing and calculations for the design, to as far degree it is possible satisfy the requirements stipulated by Swedish and by extension, European authorities.To do this the report will examine a parking garage situated underground by Akademiska Sjukhuset, Uppsala. The parking garage was built in the mid-seventies, and has in recent years been subjected to a greater load than designed for by the construction of a road on top of it. FEM-Design has been used to obtain the internalforces of the beams and thereby determine whether they are in need of strengthening or not and thereafter design the strengthening according to Täljsten (2006) with some corrections from Täljsten (2011) due to new regulations.The result of this report is that the flow chart used is viable to design carbon fiber strengthening, atleast with the conditions met in our reference project.The conclusion drawn after working with this report is that there is a need for a clear standard for carbon fiber strengthening , preferably a standard that can be used throughout Europe..

Bolivia is a multiethnic country where the indigenous people constitute the majority of the population. Despite two decades of attempts to take the democracy further is its foundation more volatile than ever. The aim of this bachelor thesis is to examine if exclusion is taken place in Bolivia from year 1982 until today and if so in which way political exclusion constitute problems of democracy in Bolivia. The answer depends on the understanding of democracy used in the analysis. In this thesis I use theories of process-, participation- and deliberative democracy.

The purpose of the present quantitative study was to examine gender differences inperceived job satisfaction in two departments, with different work patterns, in a Swedishmanufacturing industry. The questionnaire contained 30 statements and five backgroundquestions. The questionnaire was designed in combination of Job Satisfaction Survey (JSS),Work demands, Social support, Control and Competence (ASK), Questionnaire forPsychological and Social factors at Work (QPS Nordic) and Minnesota SatisfactionQuestionnaire (MSQ). Job satisfaction was measured based on the categories influence atwork, leadership, employee influence, work requirements and the physical environment. Theresults of the present study showed an interaction of gender and department where the femaleindustrial workers, who worked with more monotonous and standardized work tasks, valuedall of the categories of job satisfaction the lowest, except for the category employee impact.The results are believed to depend on that the women in the department had greater demandsfor variety in the work..