District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

Aerated steam treatment is a modern and environmental friendly method for seed borne fungus sanitation, mainly used on cereals. The method involves exposure to heat and high humidity, factors which are known to induce a fast ageing of seeds, thus resulting in reduced storability. This thesis clarifies the interdependence between seed age and the aerated steam treatment intensities. Two studies were carried out in this thesis. In the first study the storage longevity of seeds treated with aerated steam was examined. The second study investigated the shelf-life of the pre-tests used to determine the aerated steam treatment tolerance of a seed lot, by testing the treatment tolerance of seeds aged prior to the treatment.

Skin temperature is detected through signals in unmyelinated C-fibers and thin myelinated A?-fibers in the peripheral and central nervous system. Disorders in thin nerve fibres are important and not rare but difficult to diagnose by the most common neurophysiological methods. In this pilot study different methods for quantitative sensory testing, QST, were compared to give some ideas about which method could be the most efficient to use in order to point out injuries of the sensory system in clinical practice. The comparison was made between Békésy (separate warmand cold thresholds) and Marstock test (combined warm and cold thresholds).

Produktframtagningen av en moduluppbyggd destinationsskylt för bussar utfördes på Högskolan i Skövde i samarbete med företaget Mobitec AB som bland annat säljer de skyltar som används i stadsbussarna i London. Den destinationsskylt som togs fram var tänkt att fungera som ersättare för de tryckta dukskyltar som var befintliga i Londons stadsbussar och var därför tvungen att leva upp till deras krav på upplösning och läsbarhet. Detta skulle åstadkommas genom att bygga upp skylten med ett modulärt system av Super Fine Pitch LED Matriskort. Modulsystemet behövde klara viss påfrestning från vibrationer från bussen och tillåta enskilda moduler att lätt monteras och demonteras. För att ta fram ett fungerande system användes riktlinjer för DFA och DFD och användarbehov från montörer och reparatörer undersöktes. Under idégenereringen användes Set-based concurrent engineering för att inte felaktigt vidareutveckla ej fungerande koncept på bekostnad av eliminering av fungerande koncept. Tre resterande, likvärdiga koncept modellerades och testades för vibrationssimulationer i Creo Parametric 2.0.

Core strength is important in order to be able to do all types of daily activities. One way to exercise ones core muscles is according to the pre- choreographed program Fokus. Previous studies have shown that core training gives better balance and stability in the core and also improved techniques, body awareness and control. Aim: To evaluate the core endurance strength, the balance and the studied individuals self estimated body awareness and control after six weeks of training according the pre- choreographed program Fokus. Methods: A total of 14 people volunteered to participate in the study, six of which completed the study.

Core strength is important in order to be able to do all types of daily activities. One way to exercise ones core muscles is according to the pre- choreographed program Fokus. Previous studies have shown that core training gives better balance and stability in the core and also improved techniques, body awareness and control. Aim: To evaluate the core endurance strength, the balance and the studied individuals self estimated body awareness and control after six weeks of training according the pre- choreographed program Fokus. Methods: A total of 14 people volunteered to participate in the study, six of which completed the study.

The objective of this Bachelor thesis is to analyze moving patterns in Norrköping?s municipality. The main aim is to analyze the migration to, from, and within the municipality of Norrköping, not only for the population as a whole but also for groups of special interest. Another aim is to compare migration patterns in Norrköping with those of other municipalities in Sweden.Several data sets have been used, each of them extracted from population statistics carried out by Statistics Sweden (SCB).Data mining using association analysis is used for finding the migration pattern within Norrköping?s municipality and several questions are examined using descriptive statistics.

The Swedish Warmblood riding horse is a popular horse for sport in Sweden, and the breeding goal is to produce competitive horses in both show jumping and dressage. The breed has its origin in native Swedish cavalry horses but has been highly influenced by foreign stallions throughout the years. Breeding values are estimated based on the results from young horse field test, which are held for 3- or 4-year old horses, and competition data. The young horse field tests are highly correlated with later performances in competition. The total proportion of horses with own observations to include in the genetic evaluation are slightly under 50 %, and in most cases their pedigrees are known.

This study was carried out in Jordan with the purpose to investigate the bacterial microflora of egg shells from cage systems and from deep litter floor systems. Another aim wasto get a general impression of the hygiene, at farm level, of egg production in Jordan andthe factors affecting it.Eggs from two cage systems and three floor systems were analyzed, regarding bacterialcontamination of the egg shells. Egg samples were taken from the storage room, the eggcradle in the cage system and from the nest and floor in the floor system. To get a generalimpression of the hygiene at the farms, swab tests and air tests were performed. Swab testswere performed with a sterile cotton swab at the same units as the eggs were sampled andair tests were performed by opening petri dishes where the hens were staying.

This degree project deals with creating an Android application for managing representation orders placed in stores as well as evaluating Androids usage as a platform for that line of work. The evaluation will be based on tests of the application on an Android phone together with a survey consisting of written questions and a practical test of the application..

Maternal behaviour is crucial for the development of the rat pups? behaviour and stressresponses later in life. There are numerous studies evaluating the effects of the dams?behaviours on the pups, but not many addressing what can be made for wellbeing of the ratdams when breeding. Few studies have addressed the question of how the commonly usedrearing environment effects the dams? behaviour and in the long run how it effect the ratsreared to become our research models.

This master thesis has been carried out at Scania R&D at the department for Powertrain Control System Development during the winter of 2010/2011. In the thesis the writer examine and evaluate the existing method for collecting information from the tests carried out during the development of the Powertrain Control Systems software. It also contains suggestions for how a new method that enhance the validation elements could look like.The master thesis uses Vicentes theories of the ecological approach and theories of how knowledge sharing of tacit and technical information works within an organization and between the organization and its customers. First a workplace analysis at Scania R&D is carried out to see how Powertrain Control Systems work and how they test their software. Second a control task analysis, where the aims decided on after the interviews, is compared to the existing method.

Eight out of ten Swedes has once in a while pain in the back, neck or shoulders. This often depends on inactivity and monotonous work under a long time. Pain affects us mentally since the body and mind affect each other, which can lead to an evil circle of pain and depression. A typical imbalance in an office worker with the arms in front of the body while working is that the muscles on the front of the trunk will be shortened, since they never work with their full length and become strong because of the constant use. On the other hand, the muscles on the back of the trunk will be weakened and elongated, since they are working in an extended and static position.

To become a successful athlete requires several different components in which one of themost significant is the ability to develop their own physical strenght. What weight exercises has the best transfer effects for skating?Participants in the study were 20 male senior hockey players from Div. II in the Västra Gö- talands Regionen in which all participants had at least 10 years of hockey experience.Test subjects had to perform a five-minute individual warm up followed by an opportunity to familiarize with the upcoming exercise. The first on-ice test was a 35 meters sprint test and the second test was an S-cornering agility test.

Blast furnace is the heart of every steel plant. Steel production is based on the blast furnace process, as it is where the iron is extracted from the iron ore and turned into liquid iron, which will subsequently be used to make liquid steel. Therefore, without hot iron, steel can not be produced. Blast furnaces in this process are supplied among others with pulverized coal. Raw coal should be prepared for the blast furnaces in the form of fine coal powder.