In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

Denna studie vill ge större inblick och förståelse för individen bakom den kriminella stämpeln, samt bringa insyn i dessa individers egna tankar om sina kriminella handlingar och kampen ut ur kriminaliteten. Avsaknaden av tron på att personliga livshändelser sker utifrån egna handlanden, där personen istället agerar passivt offer i sitt liv är något som återfinns hos interner. Motsatsen till detta är personer som tror på sitt eget handlande, det vill säga internal locus of control. Denna uppsats belyser kriminellas bakgrundshistoria till uppbrottet ur den kriminella livsstilen med fokus på locus of control, vändpunkter och framtidsperspektiv. Tio personer deltog, varav åtta män och två kvinnor i enskilda semistrukturerade intervjuer.

Dagens samhälle är ett informations- och kunskapssamhälle där kunskap och kompetens är nyckeln till företags framgång. En förändring har skett i näringslivet då de tillverkande företagen har blivit allt färre och de kunskapsbaserade företagen har ökat. För att kunna överleva i det nya samhället måste ledning och anställda i ett kunskapsbaserat företag ständigt utveckla sina kunskaper, sitt humankapital. Humankapitalet är den mest värdefulla tillgången i ett kunskapsbaserat företag då företaget är beroende av de anställdas kompetens och kreativitet. Därför är det viktigt att dessa företag tar tillvara på och förädlar sitt humankapital.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

This work is an experimental study where knock sensor placements are investigated using engine tests. The aim is to studythe quality of the signal from knock sensors and how the signal for engine control is affected at different sensor locations on Scanias, engine DC13. To find out at witch position on the engine youcan get a usable signal for engine control, the engine is running while the knock sensors with advanced measurement equipment is connected to the engine. Evaluation of signals from the knock sensors are made in the computer program Matlab. The program is producing a seriesof plots, from these plots it is visually possible to draw conclusions and find connections.

SummaryBackground: Management control is important for all kinds of activities, both in trade and industry and in the public sector since you must economize on scarce resources. There are nevertheless many different views on management control, which have changed with the times. With regard to the public sector in Sweden, the management control systems have changed radically the last half century, especially from the 1980s, due to depressions and increased focus on effectiveness. New approaches have been taken by many municipalities and county councils, both in Sweden and internationally, where the former management control systems have been abandoned in favour of result control, target costing, and activity-based-costing, for example. Another new approach has been the Balanced Scorecard, which was introduced by Kaplan & Norton in a pioneering article in 1992.The Balanced scorecard is a multidimensional tool, originally intended to be used in trade and industry, but with regard to its nature, it has been adopted even by many non-commercial organizations, especially in Sweden.

Previous research in the area of leadership and stress has shown that the leader plays an important role but in what way is still an issue to explore. A qualitative approach was used in this study to develop an increased understanding of the leader's experience of stress using four themes; leadership, stress, control and organizational factors. A total of 12 semi-structured and un-structured interviews were carried out with 6 leaders, three females and three males. The data was transcribed and thematic as well as narrative analysis was conducted.The results indicates that leadership stress is caused by a lack of control and that factors intrinsic to the role as a leader both facilitates and complicates the leaders situation when facing stress..

Highly polluted urban storm water from e.g. highways can contain large amounts of heavy metals that may cause harm if they are discharged into recipients. To remove the heavy metals a possible low-cost method that does not require much maintenance, could be the use of reactive filters with filter materials consisting of industrial residues or other cheap mineral based materials. Dissolved metal ions are removed by reactive filters through the processes of ions binding to active sites on the surface of the filter materials, or by formation of insoluble precipitates.The ability of CaO-treated granulated blast-furnace slag, iron oxide coated sand, olivine and nepheline to remove seven heavy metals (Cr, Cd, Cu, Ni, Zn, Pb and Hg) from urban storm water was studied. Initially batch experiments were performed where the effect of pH, dissolved organic carbon (DOC) and dissolved ions on the adsorption efficiency was studied.

The environmental demands are increasing when it comes to product development. EcoDesign isabout minimizing the environmental impact of a product, considering the entire life cycle of it,without compromising other qualities like function or cost. In this master of science thesis amobile phone has been analysed with Ten Golden Rules in EcoDesign regarding production, useand End of Life. Also a functional and an environmental profile were made. The goal was tomake a new concept phone, based on the previous analysis, which communicates userfriendlinessand sustainable development.

Welding is a common method for joining of metal or plastic construction parts. This report describes several different weld methods in general terms. The report focuses on the GMAW method, specifically MAG welding.A case study has also been performed for the company Wenmec. The task received from the company was to compare the mechanical properties of joints welded with the tube electrode called Nittetsu SM-3A and joints welded with the homogenous electrode called ESAB Aristorod 12.63. Both types of weld joint were welded with the MAG method with an Argon based shielding gas with 18% CO2.

Purpose: The purpose of this paper is to examine if companies? incentive programs for employees is designed in such a way that it makes it possible for managers to reach their goals. Method: Qualitative with a semi standardised questionnaire Results: Our results is that the incentive programs for employees in their present form don?t give the companies a good possibility to effect the employees to perform towards the goals of the system. The performance measures in the incentive programs for employees is suitable in comparison with the goals of the program but the construction and the use of the systems doesn?t give a satisfied result in comprising with the goals.

Active Vibration Control of a Laser PatternGenerator in Microlithography.