This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

Part 1 of 2  ? Lean philosophy ? five steps to get the workplace in order?Part one deals with the theory of what Lean and 5S are.Lean is a long-term approach that involves a quest to become the best on the market by increasing employee engagement, eliminate waste and focus on the right things.5S is a method of order in a system. Businesses around the world are using these 5S which stands for sort, straighten, shine, standardize and sustain. Part 2 of 2 ? Lean philosophy ? five steps to get the workplace in order?Part 2 deals with the practical about 5S and a short summery about the company Wibax AB where the degree thesis took place.Wibax has a a project which involves using 5S in practice and create order in the in preparation lab and in the control room.By finding a solution to this mess reduces the time that was previously spent on searching equipment. Instead of search, the workers can do the real work..

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

The overriding purpose of this graduate thesis is to evaluate if municipalities and county councils can deviate from the legislation of public procurement during procurement of customer choice agreements within the health and social care area. The intention of this Quasi-market is to provide the users with competition in terms of quality rather then the general principal rule of economic value.My conclusion results in a legal situation without rules of general procedure. So far the authorities make their own regulation in the field of customer choice agreements. The problem lies within the authorization of new contractors and their right to make an appeal against resolutions made by the authorities social care divisions.One solution is to legislate within the present law of public procurement. Another way to solve the problem is to create a lex specialis apart from the present public procurement regulation..

The purpose with this study was to elucidate the pros and the cons with a sale support system. This has been narrowed down into two questions: ?What are the pros and cons for a company that have a sale support system? and what are the pros and cons for a company that does not yet have a system?? Configurator that is a sale support system has been studied. It is a system that presents products by accepting different functions, qualities or parts that are possible to match. It can be used in business-to-business or business-to-consumer situations, through different sale channels, namely direct sale, indirect sale and online sale.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

I Ur och Skur preschools base their teaching on outdoor activities and all educators are called leaders, disregarding their educational background.The purpose of this study is to find out how the leaders of six I Ur och Skur preschools are working, specifically with the written language, in the outdoors environment. The study discusses the concept of literacy, methods leaders use and the advantages and disadvantages they experience with outdoors education and the thoughts they have about outdoor activities. The basis for this study is the objective pursued in the curriculum: "preschools should strive to ensure that children develop an interest in written language and an understanding of symbols and their communicative functions". Respondents have also been asked what outdoors education means to them on a personal level.To achieve my research results five qualitative interviews, with room for follow-up questions, were conducted. One of the respondents felt that she lacked time but still wanted to participate and doing so by answering questions by email.

During Spring semester 2011, Linda Engstrom and Malin Heder performed ?Golden Ratio?, a thesis which included 22.5 hp. The thesis followed the syllabus for the Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which was a unit in the Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.The client was Crem International AB, a company located in Åmotfors that develops the design, manufactures and markets coffee machines. The supervisor at the company has been Peter Larsson and supervisor at Karlstad University has been Monica Jakobsson. Examiner for the thesis has been Professor Fredrik Thuvander at the Faculty of Technology and Science at Karlstad University.Crem International AB controls a patent, representing a new technology to streamline and minimize use of energy during the coffee preparation and results in a good coffee quality.

On board ships different type of maintenance activities take place. Some of those require working with vibrating handheld tools. Traditionally there is a high awareness of the risks with different type of duties such as protecting the skin from oil or other chemicals, the eyes from splashes and hearing from high noise levels. The experience we have from our time as on-board cadets are that there is less information about vibration hazards available compared to the information concerning other hazards on board.There are threshold values that workers, by law, are not allowed to exceed when working with handheld vibrating tools. The purpose of this study is to investigate how common the use of this type of equipment that can cause damage by vibrations, to the hands and arm amongst the deck crew, and if the crew informed about the risks involved.

This dissertation was made since we wanted to investigate the conception called quality within the school sector. What it means and if there is something that can give an explanation of how they  at look at the conception within the school sector. This will be the benchmark through the dissertation, trying to find out the most important things which might be equal to quality within the school.To find the answers of our questions we will read literature according to the subject. To get an increased understanding we will interview some people within the school efficacy, and give students a survey to fill in.The most important results from our investigation is to look at everything in its entirety, not only look at what grades students get. Even though this the most narrated sign of quality.

The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

At the farm Fride, in Lojsta at the Southern part of Gotland, my family runs a pig production with 80 part-integrated sows in a ?Familybox-system?. The main parts of the facilities are from the early 90´s and have done their job. The production results have the last years decreased because of new infections so we have to do something before shifting ownership! This degree thesis is meant to answer the question about which the optimal extension would be today. By studying literature, use my own experience and make lots of calculations, I try to find out different opportunities.

This study investigates augmented reality using third person perspective and what precision can be achieved by using this method. There have been prior studies in regards to precision using augmented reality, however studies using third person perspective is scarce. This study presents a solution using a static camera capturing the user as well as the plane to augment from behind. This augmented image is then transferred to a handheld device that is held by the user. Using this method the user will be free to manipulate and work with the plane without removing the device that captures the scene, a common problem when using visual reference markers in augmented reality.

During the years 1950-75 was the construction of building apartments in high speed. A rapidly growing reconstruction requirement is the consequence of the rapid construction speed in these years. The technical lifetime of the different parts of the buildings is about to end and the needs for reconstruction is huge. One of Sweden's national environmental objectives is to reduce the urge of energy in buildings. This calls for radical measures to implement energy efficiency of existing assistance particularly in the assistance that is now facing reconstruction.

AbstractThis report discusses how the intranet as a communication tool can bedeveloped to become a daily work tool. An intranet can help the organization to get information out to the employees fast, and the employees can choose when they want to take part of the information. This report also discusses how the functions and the presented information can be developed to be even better. The proposals has been developed out from information gathered from a survey,the people who has answered the survey has been given their point of view of the intranet, and also proposals for improvements, which we have implemented in to our theory part. There is no company or organization that uses the exact same intranet solution.