The thesis presented in this report has been made on behalf of Scania and their basic frame design department with the subject to solve an implementation of a weight sensing system in the chassis. The system is supposed to be implemented in the seat springs, and the reason for this is that all the force will have to go through the weight sensing transducers. With all the force going through the transducers the weight sensing system will not be sensitive for the differences in tolerances from manufacturing. The transducers could be pre-calibrated to avoid a calibration of the whole vehicle after it?s completed from the manufacturing line.Weight sensing systems is today a reality in trucks with air springs.

This research analyzed differences in measurements of magnetic field strength and frequency response in five audio induction loops installed in rooms of wooden construction materials and five audio inductive loops installed in rooms of steel reinforced concrete constructions. The inductive loops were installed at floor level and the measurements were made at the listening height of 1.2m. Measurements of background noise, field strength and frequency response were made at fifteen different measurement points across the room. The research measurements showed that there are differences in field strength and frequency response between these two conditions, whether the audio induction loop is installed in a wooden construction or the audio induction loop is installed in a reinforced concrete construction. The results had a significance level of p=0,05..

To reconstruct a building is a long-term investment for farmers and it is important that people with different qualifications are involved at an early stage for making the system adapted to the animals as well the animal keeper. Therefore, ethologists who can contribute with their expertise are needed to design the system and get it to function well for the animals.A Swedish farmer who planned to rebuild her stall for tied dairy cattle to a loose-housing system for recruitment heifers for milk production asked me as an ethologist to find a system which can be fit to her existing tie-stall barn for 30 dairy cows, considering the animal needs in terms of movement, social interactions and play behaviors, and to theoretically compare the system with other systems with respect to the behaviors mentioned.The theoretical comparison between different systems was made through a scientific literature review.In agreement with the animal keeper I set out to fit a system with feeding cubicles, a system with cubicles and a system with deep straw bedding to the barn. After measurements were taken and preliminary drawings were outlined it was found that only the feeding cubicle system was possible to fit to the barn.The space provided will limit the animals to perform some playing behaviors. To decrease aggressive interactions between animals even thought a limiting area it is possible to provide partitions between resources animals compete around to prevent that more than one animal can get success to the resource at a particular place at one time. To increase the animal movement in the system the water trays were moved to the outer wall instead of kept in contact with the stalls.Although this report provides guidelines for rebuilding, other competences regarding building construction and a pre-test of the suggested building solution according to Swedish legislation are needed before the rebuilding can start.The results are directed mainly to the owner of the barn, but the literature review can be used by other cattle farmers and might bring increased understanding of the possible effects of different building solution on the animals..

MYDATA automation AB is one of the leading companies in development of surface-mountingtechnology and stencil free solder paste applications. MYDATA?s MY500 is a jet printerdesigned for solder paste application on printed circuit boards. The jet printer contains a cassettewhich consists of a holder and a cartridge. There is also a calibration unit which monitors andcalibrates the application of solder paste.

This thesis is divided in to two different parts. The first part includes examination of the measurementsystem of an industrial robot using a resolver sensor. The main focus is on methods for suppressing noise in the angularvelocity signal without increasing timedelay. Five different methods are investigated. Three of these are based on oversampling: burstsamplingmethod, meanvaluemethod and correlationmethod.

This essay is written about how the physical environment affects teachers? own learning. The purpose is to see how the teachers? work is affected by various factors, such as the uses and placement of the teachers? offices, common room, or any other places where a meeting may occur. The survey was conducted using both interviews and observations of the teacher?s office.

This report describes the development of a system for controlling documents. The report starts with a problem description which the company wants an intranet-based solution for. The report then continues to describe the development phase for the different parts of the system which results in a complete system. The company that wanted this system is called Orbit One and is located in Ronneby, Sweden. They have had a problem with old documents circulating in different versions and in different binders.

The ?peer to peer? (P2P) is a technology of downloading and filesharing between online - Internet - users by the mean of specified software. Since June 1999, the Napster software has made the happiness of millions of individuals who used it to obtain and share free audio files Mp3. Rapidly, the major recording companies have prosecuted the Napster Company and managed to force it to close down. They were arguing against it for it is supporting the development on a large scale traffic of files protected by copyright and thus was threatening the whole music and movies economic world.

The reason why this essay is written can be parted in two, whereas one would be the global trend of urbanization that occurs to this moment and forward, whereas the other would be the debate of how motorism has come to be an issue of sustainable management of our cities and our environment. In purpose to deliver a thorough understanding of how the car and its capacity has come to shape the society of today, and to emphasize the problems it´s brought, a historical survey has been made, followed by the report of problems to the society formed by the needs of the car, discussed in several environmental issues, such as jamming, noise and air pollution. This is followed by the discussion of potential solutions for how city planning could return to the focus of the human scale and perspective, in purpose to correspond with the issue of ways to decrease the car use in towns. In conclusion, the given solutions are discussed, where examples like shared space, investment in public transport, mobility management and the theory of the assembled city are included, with aid from literature, to finally conclude the essay with personal thoughts of how the planning of today, or the given solutions, really are the result of sustainability for city planning from a human perspective.

The purpose of this master thesis has been to find different solutions to the design of a headlamp with a cluster of three or possibly four high power LEDs (Light Emitting Diodes). During the work, two different problems have been considered; how to design a lens in order to shape the light beam in a desirable way, and how to design a cooling system which will lower the temperature of the LEDs as efficiently as possible, still taking into account the geometry set by the optical solution as well as other given geometries. The results presented in this thesis are partly the outcome of a literature study, but derive mainly from a number of tests and measurements made on two test rigs and one concept prototype..

This degree project illustrates newsprint and waterless offset. A new news press was introduced at Drupa-00, Cortina from KBA, which is the first news press dedicated the waterless technique. With actual statistics from the company in question an investigation was made whether their production fits this press. It came out in the investigation that the production of the company, from statistics, fits this press very good. A table was made where different timeschedules were accounted for the new press, with semi- and full automatic plate changing for present and to be added papers.

With my bachelorwork I aimed to design a new mobile ?livingspace? which should become as small, functional andeasy to assemble as possible.The ?living space?is made for people who are interested inhaving a biking vacation and getting more close to naturebut at the same time wish to have a comfortable and easyway of traveling and living. The ?living space? is a multipurposevehicle which you transport with a bicycle. Thevehicle contains a kitchen with workspace, a refridgerator,space for luggage and a comfortable sleeping space.In my workingprocess I made research, sketches and modelsto find a functional solution..

Idag väljer allt fler butiker att starta en webbshop och på så vis nå ut till fler kunder samt marknadsföra sig på ett enkelt vis. Eftersom konsumenter söker och jämför produkter via Internet är det viktigt att företag och deras erbjudande är tillgängliga även där och inte försvinner i det brus som uppstår på marknaden på grund av exempelvis konkurrenter. Syftet med vårt arbete är att undersöka, analysera samt diskutera hur en mindre klädbutik påverkas av att både driva en butik och en webbshop samt även vilka fördelar som kan utnyttjas. Vi har intervjuat tre företag som har fått svara på ett antal frågor om hur det är att driva en webbshop. Vi valde att intervjua mindre butiker som använder sig av webbshop som ett komplement, för att se hur det påverkar företaget.

AbstractThis thesis is the final part of the Innovation and Design Engineering Programme (180 ECTS credits)at the Faculty of Health, Nature and Engineering Science at Karlstad University. The extent of thisthesis is 22.5 ECTS credits and has been performed independently by Hannes Jernberg during thespring of 2013. Metso Paper Karlstad AB is the task maker of this project, and Arvid Johansson is thecompany Representative. Metso Paper Karlstad AB is one of the world leading developer andmanufacturer of tissue paper machines.In the current situation, the company has developed and patented a power management systembased on a Cross Flow Turbine. The current construction is limited to a paper width of 2.9 meters.The company wants to take advantage of all the opportunities provided by the patents, to develop aturbine solution paper machine with a paper width that is wider than 5.5 meters, and give the abilityto manufacture paper for lower energy consumption which is an important part of the production asit is very energy intensive.Problems arise with the increasing length of the turbine, ultimately resulting in that the deflectionbecomes too big and that the momentums, due to the increased torque the turbine blades breaks.By applying the design process, this work has resulted in a number of potential solutions to theproblem.

Den övergripande målsättningen med denna uppsats är att visa hur GIS kan fungera som stöd i en MKB. För att exemplifiera detta genomförs i denna uppsats en specificerad studie kring flygbullerpåverkade områden vid Malmö-Sturup flygplats. Flyg-bullerkartor erhölls från Luftfartsverket (LFV). Analyser gjordes för olika startriktningar om flygbullrets interferens med bland annat människor, naturvård, kulturmiljö, friluftsliv, fastigheter (egendomar) samt med några tätorters expansionspotential. Jämförelser genomfördes mellan flygplanstyperna McDonell Douglas MD80 och McDonell Douglas DC9.