The objective of this study is to examine the sustainability of recovering industrial wasteheat from several heat sources in a foundry constructed in a plant belonging to ITT Waterand Wastewater in Emmaboda, Sweden. A triple bottom line perspective will be appliedto achieve this objective. The triple bottom line approach takes into account ecologicaland social performance in addition to financial performance. The technology forrecovering the waste heat is a Borehole Thermal Energy Storage (BTES) which is aconstruction consisting of 140 vertical boreholes, 150 meters deep with an internal spaceof four meters.The calculated amount of energy for storage is approximately 3800 MWh annually. Ofthis amount 2500 MWh are expected to be utilized, while storage losses accounts for theremaining part.

This is a final thesis done at BT, considering one of their forklift truck models called Reflex. The first part of this report is about a preliminary investigation investigating what kind of diagnostic systems BTwants to use, and also which demands there are to meet all expectations on such system. Secondly a diagnostic system, which will show if the drive wheel is worn out, will be presented. In the preliminary investigation, two kinds of diagnostic systems were mentioned. These were Model based diagnosis and Predictive analysis.

The municipality of Sandviken is in a state of strong growth. This affects the need for more hotel rooms in Sandviken, in a way that it?s profitable to invest in a new hotel. Sandvikens largest company, the steal industry Sandvik AB, grows just like Sandviken, and have great influence on the need of more hotel rooms. Today there are three hotels placed in Sandviken, and these hotels aren?t enough when the pressure of hotel guests is at its top.The purpose with the project was to analyse the criteria?s that are important for localization of a new hotel in the Sandviken, and to clarify what kind of hotel Sandviken is in need of.

Future emission legislation puts great emphasis on increasing the efficiency of the engine, thereby reducing fuel consumption. The tribological contact between cylinder liner and piston ring is where an great amount of energy is lost due to friction, and by reducing these losses an reduction in fuel consumption can be achieved.The aim of this thesis was to evaluate the tested piston ring coatings against a plasma sprayed cylinder liner and rank these combinations of materials for friction and wear resistance. The coatings that were tested was Cr + Al2O3, (Al,Cr)N, two types of CrN and WC / C.The experimental tests were performed with a so-called pin-plate, where used oil with addition of an acidic mixture of sulfuric and nitric acid to mimic the acidic condensate formed when exhausts recirculate, were added with a continuous flow. The results were then analyzed by weighing, studies by optical microscopy and scanning electron microscopy (SEM) and profile measurements.The results from each material combination were that the plasma coated cylinder liner wears too aggressively in order to yield a ranking of the piston ring coatings based on the parameters of friction and wear resistance. It is therefore proposed that an alternative coating on the cylinder liner should be developed, lacking the large abrasive wear on piston rings and that can withstand the corrosive environment resulting in engines equipped with EGR.

SEP Modular Armoured Tactical System is the next generation of military vehicles developedby BAE Systems Hägglunds AB. At present time, BAE Systems Hägglunds AB aredeveloping a 6-wheel electrical hybrid and a conventional 8-wheel vehicle. The questionformulation was summarized as: ?In which ways can the electrical transmission in a hybriddriveline for SEP be designed, when the surrounding fixed interfaces are kept and the unity ofcomponents within SEP is maximized??. The purpose of this master thesis was to study avariety of concepts for hybrid propulsion.

The component workshop at Atlas Copco inTierp intends to reduce the costs inorder to increase their competitiveness.This thesis examines how the productionmanagement around cylinder washersshould be managed in a way that meetsthe customer needs. The customer to thecylinder washer is Atlas Copcos assemblydepartment in Tierp.The purpose of this thesis is to providean alternative way of managing theproduction. A chapter of theory is addedto give the reader an insight ofdifferent types of production managementsystems as well as the underlyingknowledge needed to get a better readingexperience. An introduction of kanbancan in theory help Atlas Copco in thedirection they strive. It should beclear how the purpose of this thesisaffects the cost for the componentworkshop and also how it relates to thecurrent production.

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

The free choice of upper secondary school?A study of the meaning of the information channels for the choice of upper secondary schoolAuthors: David Fridner & Rikard ZeilonMentor: Ingela WadbringQuestionnaire studyDate: 2008-08-11AbstractThe choice of upper secondary school is a very important choice, both for the school and for the ninth grader. In Göteborg, the free choice of upper secondary school has generated several new information channels apart from the traditional counselor, daily news and the acquaintance. Today it is harder than ever to reach the pupil through the constant media noise and new forms of communication such as events appear. The fight for each pupil gets more and more important every term and it has now become real big business.Today?s youth is imprinted by a growing individuality and everyone knows that equableness is something very important.

This master?s paper first presents some of the principal theories and concepts developed by the poverty researchers Rowntree, Titmuss, Townsend, Sen and Lister. These theoretical frameworks are then related to two documents from the EU and Sweden concerning combating poverty and social exclusion, bearing on the establishment of the ?Year 2010 against Poverty?. Finally, I discuss the value in practice of these theories and policy documents, as regards reducing poverty in Europe.It has become clear in this investigation that the theories and concepts from earlier research are still relevant to the formulation of contemporary policy programmes, and that earlier research helps us to avoid old traps in fighting poverty.

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

Abstract:This thesis work has been conducted at the Real Estate Department in Halmstad.The department consists of a construction/project management-unit and an operation/management-unit.Like many other towns in Sweden, Halmstad has had a long lasting problem with indoor environment. Not at least at their preschools.Today they are constructing from current building regulations. They have learned from negative experiences which have occurred in the indoor environment in older buildings.Focus is now on healthy materials, like low emission value, energy efficiency and optimization of the building, but still with soft parameters such as cleaning, interior and choice of materials.The fixtures is provides by the real estate department and the furnishings are provides by the children and youth administration. Together they are trying to provide a great indoor environment.I have, together with the real estate department and the children and youth administration of Halmstad, investigated how to provide a good indoor environment in the preschools with small funds.In my thesis there is one theoretical part with a questionnaire survey of how the preschool staff is experiencing their indoor environment to determine where the problems often start. And a practical part with measurements to try and come down to a result that analysis the cause of the problems and also to make sure that the ventilation systems are fulfilling projected values.The measurements and the questionnaire surveys was made at Lokes preschool in Frösakull, Askens preschool in Oskarström and Gullbrandstorps preschool.There were some differences between the staff-responses at the three different preschools.At Askens preschool they feel that the premises are cleaned poorly.At Gullbrandstorps preschool they feel that the indoor-air is bad because they can´t open the windows.

När den svenska regeringen beslöt sig för att sänka restaurangmomsen den 1 januari 2012, gjordes det för att stimulera restaurangbranschen att sänka priserna på måltiderna, nyanställa och eliminera svartjobb. Vid en sänkning av momsen frigörs kapital, ett extra ekonomiskt utrymme, som för företagen blir en tillgång som de själva får avgöra hur det kommer disponeras.Denna studie ämnar ta reda på vilka effekter momssänkningen kommer medföra för branschen och hur restaurangägarna disponerat det ekonomiska utrymmet. Material har införskaffats genom en enkätundersökning med restaurangägare, intervjuer med hotell- och restaurangfacket samt branschorganisationen Visita. Med utgångspunkter bland annat inom nationalekonomiska teorier visar undersökningen att restaurangägare valt att använda det ekonomiska utrymmet till att nyanställa, sänka sina priser, genomföra renoveringar eller till överlevnadsmarginaler. Detta tyder på att det finns en spridning över hur restaurangägarna handlat.

The Swedish Government has set a target to reduce energy consumption through energy efficiency within the construction and real estate sector. The purpose of the study is to examine how energy efficiency within this sector could affect the district heating volume in the future, on basis of Vattenfalls district heating system in Uppsala.An Excel model has been created to study how energy effficiency measures affects district heating demand in buildings by 2045, based on technical and economicalconditions. Furthermore, an interview study has been conducted to examine incentives for district heating customers to invest in energy efficiency measures.Result of the Excel model shows that the district heating volume of Vattenfall in 2045 is expected to 931 GWh, which corresponds to a volume decrease of 10,6 %. Based on the study?s theoretical framework only 15 %, 1 024 GWh, of the technical-economical potential is assumed to be implemented.

Energy efficiency is important both to reduce costs and to reduce greenhouse gas emissions in the atmosphere. Reducing costs will also help maintain business competitiveness.Scania in Södertälje is a company where the optimization of energy use is an ongoing and continual process. One area with potential to make energy and cost savings is the effectiveness of the ventilation systems in offices and industrial premises at Scania. During the summer months an increased demand for cooling occurs, leading to increased ventilation and a peak in district cooling system usage. Sorptive cooling is a technology where the supplied air is cooled by applying external heat.

Aim: To examine director?s experiences of the process to implement smoke-free working hours and also their need of support to make it feasible in the municipality of Östhammar. Method: A qualitative interview study with a descriptive design was used. Semi-structured interviews were made with six directors who were selected from different levels, localities and administrations in the municipality of Östhammar. A qualitative content analysis was used to analyze the data.Results: Many positive aspects were pointed out regarding the implementation of smoke-free working hours.