In Sweden the real estate sector accounts for 33 % of energy consumption and just below 10 % of the emission of carbon dioxide. As a consequence of the external pressure from climate change it?s in everybody?s interest to reduce the energy consumption and thus reduce the emission of carbon dioxide. An additional incentive to reduce the energy consumption is the substantial increase of the energy price since the deregulation of the electricity market in 1996.In this study the techniques that exist to build Multi-storey residential buildings with high energy performance will be investigated. Further the study intends to investigate the optimal energy performance from a real estate economic perspective.In order to investigate the optimal energy performance a model has been created with the parameters investment cost, rental revenues, operation and maintenance cost, discount rate and investment horizon.The result shows a relationship between a high investment cost and a high energy performance for newly constructed Multi-storey residential buildings.

The construction and use of buildings in the EU accounts for half of the EU?s extracted materials and energy consumptions, and a third of greenhouse gas emissions. In the past decade, the construction sector has responded to such concerns by focusing on post production energy efficiency. However, new findings indicate that upstream construction processes influence emissions significantly ? necessitating a shift in focus to include material choices and building processes.

The industrialized timber housing process is capable nowadays to build Multi-storeyhouses since fairly new changes in the Swedish regulations where made after theadmission of the European Union in 1994.The industrialized process moves parts of the construction process into a highlyeffective factory where 3D-volumes of the building are prefabricated beforetransportation to the building site for assemble.The assembly process is relatively effective compared to the completion of thebuilding service system and this is therefore the main focus in this thesis. This thesisattends problems with completion of the building service system, and thereforedemarcates from other aspects, such as technical and economic aspects, of thebuilding service system.The degree of completion of the flats differs from completion of the connectivepassages, for example hallways, in a way that suggests a need for further investigation.This thesis includes analysis of the possibilities to increase the prefabricatedconnective passages, to the extent of containing building service systems.An increase of the prefabrication of the building service system has a greatdevelopment potential, even though some restraining factors need to be solvedbefore implementation.This thesis was made in collaboration with two of Sweden?s leading companies on themarket of Multi-storey industrialized timber housing, Moelven ByggModul AB andLindbäcks Bygg AB..

A place that mixes different kind of uses of space. Two main theatres inside and a lot of smaller rooms for different venues. A methaphor the tide have strong impact of shaping the building.

Today multi-touch technology is the basis for many new techniques designed to improve interactions with computers and mobile devices. It seems that multi-touch screen interface makes the user handling very natural in the sense that there is no need for a manual in how to interact with the object on the screen. The aim with this paper is to establish a fundamental set of design principles intended specifically for large multi-touch interfaces. To reach this goal we have implemented a couple of sub-goals beforehand: It was essential that we acquired a good understanding of the current state of the multi-touch interface and the different implementations that exist today. To make this possible we constructed a multi-touch display, "Rosie". Knowing how the hardware is produced today will help us understand the limitations and also the possibilities of the design implementations today and in the future. We also needed to devise a sound interaction design process that conveys the modern designers work.

The aim of this study has been to investigate a group of upper secondary school teachers? approach to work with the ethnic multi-culturalism that characterises the Swedish society of today and to point to the obstacles and possibilities the teachers see to work with this. With the help of interviews with eight teachers satisfying results could be reached. The results showed that it was possible to distinguish three different ways to think and act when it comes to the work with ethnic multi-culturalism in school and teaching. The approaches entailed different consequences on the way the teachers conduct their teaching.

Abstract Our society is becoming increasingly multicultural and so are our schools. This study raises the question of how teachers are working to promote multi-culture and how they can create an understanding of the diversity in the classroom. One way is to use the literature. Literature is already well integrated by many teachers and widely used by pupils. By making use of literature related to multi-culture, pupils can get a deeper understanding of our society.

Multi-brand portfolios are characterized by comprising many brands in the same product category. Companies that have chosen to organize their products according to this strategy are facing both possibilities, such as expanding the accessible market size, and challenges such as how to organize the brands, their individual roles and their relation and position to the other brands in the category to maximize revenues. To address these aspects of multi-brand portfolios, I have investigated four product categories where multiple brands are represented at Mölnlycke Health Care, Unilever, Fagerhult and L?Oréal; how the multi-brand portfolios are organized, how the segmentation, positioning and product differentiation are done and what advantages and disadvantages that are associated with this strategy. My conclusions are that multi-brand portfolios can be organized in many different ways and to become successful, they have to be set in relation to the company?s whole brand architecture.

Today multi-touch technology is the basis for many new techniques designed to improve interactions with computers and mobile devices. It seems that multi-touch screen interface makes the user handling very natural in the sense that there is no need for a manual in how to interact with the object on the screen. The aim with this paper is to establish a fundamental set of design principles intended specifically for large multi-touch interfaces. To reach this goal we have implemented a couple of sub-goals beforehand: It was essential that we acquired a good understanding of the current state of the multi-touch interface and the different implementations that exist today. To make this possible we constructed a multi-touch display, "Rosie". Knowing how the hardware is produced today will help us understand the limitations and also the possibilities of the design implementations today and in the future. We also needed to devise a sound interaction design process that conveys the modern designers work.

Purpose/Aim: The aim of this thesis was to examine how multi channel publishing in different stages effect the work for journalists.Material/Method: The thesis is based on ten case studies selected from the literature and one conducted especially for this thesis. The case studies have been categorized according to a model that describes three strategies for multi channel publishing. The first strategy is to have a primary publishing channel, the second is to have separate editorial staffs for all publishing channels and the third is to treat all publishing channels equally.Main results: Journalists working for companies using the first strategy have not experienced any major differences in working conditions or work practices. For journalists employed by companies using the second strategy for multi channel publishing the effects on the journalists was noticeable but not major. The effects on journalists in companies using the third strategy are mainly stress and an uncertainty regarding how to use special media techniques..

Franchise theorists have to a large extent failed to keep up with the actual development in global franchise chains. The recent emergence of fast growing multi-unit-franchisees has fundamentally been ignored, and it has been claimed that the new phenomenon can be regarded as a mere replication of the franchisors? structure and control system into sub hierarchies. This study however, suggests that the reality is more complex. Through conducting case studies of two Nordic multi-unit-franchisees, new theories are built explaining how and why control systems are designed the way they are.

Ett sekellångt förbud mot att bygga hus med trästomme högre än två våningar har gjort att värdefulla kunskaper om träbyggandet gått förlorat samtidigt som andra material istället etablerat sig på marknaden.För utvecklingen av flervåningshus i trä har Växjö blivit en förebild för andra städer i Sverige och resten av världen. Med denna studie vill författarna skapa en uppfattning om var i utvecklingen vi står idag samt tillvarata erfarenheter från fyra representativa projekt.Målet har varit att ta fram faktorer i produktionsprocessen som påverkar tid, kvalitet och ekonomi för flervåningshus i trä. Dessutom har det undersökts i vilken grad och på vilket sätt erfarenheter från tidigare projekt omsatts i senare projekt.Arbetet resulterar i ett antal punkter som är viktiga att ta ställning till vid en byggnation av flervåningshus med en träbaserad stomme. Dessa punkter berör bl a vad som behöver beaktas vid hög prefabriceringsgrad, varför och hur väderskydd bör användas samt hur sättningar påverkar en träbyggnad. Utvecklingen är starkt beroende av kontinuitet och av att fler hus av denna sort byggs.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

The purpose of this study is to explore the differences and similarities regarding the causes of and approaches to bullying among a number of girls and boys in third grade in two schools. One of the schools is in a mono-ethnic area and the other in a multi-ethnic.The purpose isto compare the results between the schools and the questions proposed are:What is the reason for the bullying?What are the differences and similarities in existing opinions on the practice of bullying?What are the differences and similarities of students' opinions on bullying in a mono-ethnic and in a multi-ethnic school?I have chosen to use gender and ethnicity theories and the study was conducted through qualitative group interviews. The results have shown that boys' explanations for bullying are more aggressive than girls, although approaches to bullying were more related with violence among boys. The multi-ethnic school uses more direct bullying compared to the mono-ethnic school where indirect bullying occurred more often.

It has become more common for organization to operate a lot of projects at the same time. These projects affect each other, either in way of resources or technical. Projects in a multi-project environment depend and affect each other, and in most cases they rival about resources, decision-makings and priority. To lead a project portfolio with several projects is a major challenge. The most common problems that occur are vague objective, unclear working conditions, resource shortage and problems of priority.