Today many industrial companies invest a lot of resources on research and development to resist the tough competition on the global market. This leads to a high risk game when the companies start many development projects, with uncertain outcome where some of the projects have to be terminated prematurely. The main purpose with this study is to identify factors, both internal and external, that influence the decision to terminate projects prematurely in Swedish development projects. Factors mentioned in the literature will be compared with case studies on three Swedish industrial companies to demonstrate the most important ones when taking such decisions. First a literature study was made to identify basic terms, a general project model and factors affecting the decision.

The purpose of the project was to exam steams ability to sterilize carrots infected withLactobacillus plantarum. The project was a cowork with Brämhults Juice AB. They hadobserved an increase of Lactobacillus in the production of carrot juice during the summer. Tokeep the flavour of fresh fruits, the juice is treated carefully with heat. This means that thejuice only stays fresh for a few days, around two weeks for an unopened package and threedays for an opened package.In an attempt to remove the remaining Lactobacillus of the carrots, steam is tested as an extrastep in the production of juice.

The aim of this master thesis is to examine high school students? understandings and experiences of gender equality and to critically study the formulations and the basis of the project from Save the Children Sweden which are the basis for this master thesis. By using critical discourse analysis and gender theories the formulations and basis of the project and the interviews has been analyzed. The analysis of the project showed neglect for intersectional perspectives and taken for granted hidden opinions about masculinities and femininities. The interviews have been conducted with four high school students, and the students felt that they attend schools which are equal between genders.

This report gives an overview of applications of the Greenroads rating system whichin turn is an environmental review system for roads. The focus of this report isapplications during the construction phase, ie on solutions which adhere to theentrepreneur's area of responsibility as opposed to the designer's. The study was undertaken in cooperation with Skanska (a global contractor andFortune 500 company) which provided a project suitable for an exemplatory study ofGreenroads. Please note that the project in particular was not specifically designedwith Greenroads in mind. Therefore and because of that the site provided anexcellent opportunity to study effects of application contra non-application. The approach of this study was to first review the system, thereafter to performinterviews with key personel at the site in different roles as to receive different viewsof selected points of application. Selected possibilities of application are cathegorizedand presented with comments and suggestions for adoption. Lastly Greenroads is briefly compared to the rating system which today is the mostwidely used by Skanska, LEED.

This is a qualitative study with a hermeneutic and partially inductive approach. The study?s purpose is to enhance the understanding of young adults experiences of unemployment and the importance of being employed. In this study, eight young adults participate in the project Framtid Kronoberg. The youths are 19-25 years of age.

This project is a collaboration with Ett Klick för Skogen, a foundation that buys and preserves endangered forests in Sweden. There are several ways of helping the foundation, e.g. buy a tree and for this the buyer obtains a symbolic diploma. Many organisations uses this method to collect money and for me the lack of a thorough expressions are consistent. The objective with this project has been to renew these diplomas for Ett Klick för Skogen and in the long run increase the collections and preservation of endangered forests in Sweden.The idea has been to vivify hardwood trees in a new and rather poetic than pedagogic manner.

In most software engineering project, users are only involved in the beginning of the project as a help to design the requirements specification but users can be involved after this phase too, but is it effective to do so? With this report we would like to investigate how effective it is to involve users after the requirements specification has been written and approved. To find out how effective it is to involve the users we try some fast and simple involvement techniques on a quite far gone project. These techniques include ethnographic studies, prototypes and surveys. We also interviewed a couple of people who work with usability and finally delivered a report with our results to them to find out if they found our result relevant.

This degree project contains a theoretical and a practical part about magazine design. Literature aboutthe subject?s typography and magazine design has been studied and put into practice on the professionaljournal Ingenjören. Besides of that a study about the history of magazine typography for the lastfifty years has been done.Typography and other design factors are important for the magazine to be readable and gives at thesame time the magazine an identity of its own, which has become more and more important throughoutthe last decades.The result of this degree project is a new design for Ingenjören, a design that agrees more with howthe journal want to be considered. A new template, a dummy and a manual have been produced.

The industry struggles with problems concerning physical damage to wiresand communication in remote areas. Introducing a wireless network canprovide a solution to these issues. However, introducing wirelesscommunication comes with a whole new line of problems that will becovered in this report. By utilizing the wireless communication standardIEEE 802.11 a product can easily be integrated into an existing wiredEthernet network (IEEE 802.3).An introduction to the standard IEEE 802.11 and a summary of existingproducts utilizing the standard for embedded systems will be giventhroughout the report. This report also tries to explain key parameters forwireless communication in an industrial environment.This project also consists of a design and an implementation part, where thechosen IEEE 802.11 standard will be integrated into the existing wiredAnybus-S Ethernet module from the company HMS Industrial Networks.The integration part of the project has resulted in a working prototype calledAnybus-S Ethernet Wireless that utilizes the IEEE 802.11b/g standard fortransferring data.The project has been really fun to participate in and it has been successful inthe terms that a working prototype exists, and the authors have gained theknowledge in the subject as intended..

This degree project has been done in parallel to the advertising agency Hera in Uppsala, and containsthe creating of a logotype and graphic profile for Aircall, a new big chain of shops dealing with telecommunication.Aircall was found 1 February 2004, when three smaller companies became one. Thisnew company were in need of a common brand and a uniform profile. The created graphic profile hasbeen applied to visiting cards, letterhead, envelopes, letter cards, bags, cars and advertisement. Thegraphic profile has also been used when designing the shop interior end exterior. Research has beendone on competitors graphic profiles and advertisement.

The aim with the project was to portray something to step on. Its purpose has been to experiment and explore the interaction between pattern, structure, material and colour for something to be applied on a floor. Focus has been on esthetic expression and not the creation of some¬thing for a specific environment or audience. My goal was also that this project would illustrate the importance of the floor to create a certain atmosphere in a room.The project was divided into three phases. The first one was the experimenting and exploring phase, where the goal was to find an expression.

This essay is a product of our examination work on candidate level in Interaction Design. The aim in this project was to design a digital wallet integrated into a cellular phone and make it as an electronic payment tool. In our project the goal has been to create a digital wallet not just for payment, but also develop it into a complete digital wallet, replacing visa, membership card, student cards, id card and receipt. Our ambition is to take care of current qualities of today's wallet and improve where it is possible so that can be replaceable with the digital wallet..

This is a case study of Carlstad Comic Con 2011 and 2012.The purpose is to study the event in relation to a project management and a local culture policy perspective. This in order to analyze the organization of a popular culture event and see how such a local event may benefit Karlstad as a city. Besides studying the organization of Carlstad Comic Con and its outcomes I am sketching a short cultural history of popular culture media and its context within recent year?s globalization.The study shows that the events have had a great beneficial impact on the local industry; lacking any negative sides, and have put Karlstad in an international context which goes directly in line with the standard guidelines for project management of region culture policy. Concerning how to organize the event the organizers have not followed a strict project structure.

This report is going to be focusing on the development of a promotion page and login system for the web production company Adoreyou. The promotion page and login will be parts of a new taxi application for iPhone that lets the customer book a taxi and drivers manage the requests from the customers.Taxi application?s that let customer?s book trips are nothing new but they are constantly being explored and developed. The most common practice is to let the customer fill in from what address he or she wants to be picked up and to where he or she wants to be taken. Then the price is set in the application depending on the distance and most likely other factors like weekday and time.

The company Somas, Säffle, has assigned Fredrik Kjellin the project of finding out how ?KVTF DN250?, one of their own valves, reacts on cutting forces under production. They wish to know if and then how much it?s possible to minimize the wall thickness of the valve with neither plastic nor to big elastic deformations caused by processing.The most critical processes have been identified as rough lathing. The study has shown that the marginal for a wall thickness of two millimeters, to fall short of the yield stress in the most critical process, is good.