This study compare if there is any differences between Fairtrade certified and uncertified coffee producers in Aceh Tengah, Indonesia. The aim was to compare the way the two groups of farmers produces their coffee and see if there were any differences between them, income, post harvest, production etc. During a visit in the district of Aceh Tengah, producers from both groups were given a questionnaire with questions about their farm and their production. The results of the questionnaires showed that the certified producers felt they had benefits being a part of a certified cooperative. Even with the experienced benefits the certified cooperatives gave the connected producers, like agronomy consultation and workshops the uncertified producers had a higher income from the coffee per hectare. This study also indicated that introduction and presence of Fairtrade and the connection to the world market Fairtrade brings with it, has gained the entire area, for example with more stabile coffee prices..

En av Glimek AB:s mest förekommande maskiner är SD-180 som används för degavvägning. Den finns i flera olika varianter. Den enklaste har enbart start- och stoppknapp och en potentiometer för att ställa hastigheten och en mer avancerad variant har en operatörspanel där olika möjligheter till inställningar finns.Konstruktionen på denna maskin hade inte uppdaterats på många år och behövde en uppdatering av användargränssnitt, programvara och elkonstruktion. Arbetet har framförallt koncentrerat sig på användargränssnittet till panelen.En del av arbetet var att undersöka om det var möjligt att utesluta PLC ur konstruktionen och använda en mer avancerad programmerbar frekvensomformare. Eftersom det blev problem med lanseringen av programvara till frekvensomformaren och enbart en mindre bra fungerande demoversion fanns tillgänglig så var detta tyvärr inte möjligt.I arbetet har olika varianter på operatörspaneler utretts.

Companies that invest in e-learning have different expectations regarding the outcome of the investment. According to literature and articles it is common that companies see reduction of costs as the primary benefit with e-learning. Therefore we ask ourselves the question if companies have attained the expected benefit of the investment in e-learning and to what extent cost reduction have been a determining factor in the investments? The purpose of the thesis is to examine if companies that invest in e-learning have attained the expected benefits. We also want to examine what the reason for investing in e-learning is and if cost reduction is the primary reason for investing. The study is founded on a qualitative method that is based on a case study in eight companies.

This paper analyzes the Swedish labor market during the interwar and early postwar period within the framework of modern labor market theory. The development of unemployment during this period - according to the commonly cited source of labor union reports - represents a conundrum for research. The unemployment rate rose after the initial diverse shock of 1921 and stayed at a permanently higher level for the rest of the interwar period. This development was reversed after World War Two when the unemployment rate decreased and stayed permanently low for the rest of the postwar period until the oil price chock of the 1970s.In a first step the available sources of unemployment statistics is investigated and compared. The general conclusion is that the labor union reports overestimate the level of economy wide unemployment while being a reasonably good indicator of movements in the rate.

To produce milk of good standard the feed for the animals kept for milk production is an important part in the work of quality. This makes it important to feed them with good forage, especially when feeding with silage. The process of making silage is very complex and requires a careful handling to be successful. The fundamental idea is to create an anaerobic environment in the herbage to favour the desirable micro-organisms, in this case the lactic acid bacteria. This environment is created by careful handlings were the importance is to pack the crop well and cover it as soon as possible to exclude oxygen.

This Bachelor of Science thesis was carried out at Metso Panelboard AB, located in Sundsvall, Sweden. The work lasted for 10 weeks and began at the end of February 2007. Metso Panelboard is one of the leading suppliers of complete lines, single machines, engineering knowledge and after-market services to the fibreboard industries. The task involved building a 3D-model of a dryer cyclone in the CAD-program Pro/ENGINEER. A dryer cyclone is the part where the tree fibres are dried in the process of manufacturing fibreboards. Currently, it takes about two weeks to draw a dryer cyclone. By creating a 3D-model of it, which should have the functionality to be generated to different sizes, the goal is to decrease the drawing time to about 20 hours and to increase the quality of the work. This report includes the fundamental theories behind the manufacturing of fibreboards with focus on the dryer cyclone.

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

No accidents or injuries should occur because of our public health care. It should be a place with high security and good quality in order to avoid this type of accidents. This is a tough situation when the public health care organization should have as good quality as possible despite savings. It is difficult for middle managers to improve patient safety in the absence of money.The purpose of this study is to explain the work with patient safety that middle manager perform during saving times. The perspective we will look into is how they work with patient safety as an ongoing change.

The avowed aim in this project was to see how the Swedish egg production is today. My first question was if the Swedish egg producers egg production turn a profit. I have done five after calculation at five different egg producers with different systems from case to case. The difference has been the living system, the fodder and the egg price. They made a report in Uppsala, Sweden (Hoffman & Andersson, 1996), where the look forward to a Swedish cage ban and made calculations after that coming ban. After that they lift the Swedish ban of cages and the egg producers could invest in new cages who called the decorated cage.

The enterprises of today are beginning to realize that environmental issues are a important part of their activity. Companies and organizations are expected to a greater extent communicate their environmental work to the world surrounding them in a trustworthy and structured way. Lack of information or information that is incorrect may bring farreaching consequences. Communication is mentioned in several of the ISO 14001-standards. But what is missing is a guideline how companies should act to create and be sure of the quality of the data that can be used in the environmental communication.

The interactive whiteboard (IWB) is to be found in many classrooms in Sweden, and its number is growing rapidly. There is a lack of research of the use of the IWB in Sweden. The Swedish National Agency for Education refers to English research where the investment in the IWB in school is huge. In this study I will investigate how the IWB can be used as a mediating tool in the learning process. My study examines how interaction pattern appears when the teacher teaches with the IWB as a tool.

Academic research concerning how to determine the power situation in a supply chain where an investment product supplier is involved did not exist. Therefore new models has been developed that analyses the power relations and maps out the power situation in a supply chain. In the future these models can be applied on similar cases by modifying the included parameters. The new models show that case company FAS should focus on the big producers of garbage bag which are Trioplast, Rullpack and Miljösäck. By strengthen the brand FAS can make more money in these relations.

Today Scania give a high priority to the continuous improvements on the quality of their vehicles. To follow up the flaws in product quality, which are recognized by the repairs at the local workshops, material requests are carried through to be able to analyze the defects at the plant in Södertälje ? in purpose to improve the product quality. The material requests are also carried through to compensate the workshop for their expenses and to check that they are working according to the company?s warranty manual.Due to local routines and different distribution structures at the different markets the lead times and the costs caused by the flow of material are hard to estimate.

Machine-to-machine (M2M) communication is a phase in the digital revolution connecting computing devices with each other bringing along new business opportunities for companies. Although being a fast growing field it has not been researched to any greater extent, particularly not within the academical literature. Consequently, information on how M2M can affect organisations seems strongly needed. This thesis uses three perspectives, derived from already recognised business benefits of M2M, as an aid to select proper theoretical tools to investigate the phenomenon. The purpose of this thesis is to gain knowledge of how an M2M adoption affects a firm?s organisation, customer offerings and customer relations.

Reverse logistics is getting more and more attention both from companies and the public. It is an area with the possibility for companies to do good in the eyes of the public. This work focus on the return system of a one-way handling material called the loading ledge. The loading ledge is developed by IKEA as a substitute for the EUR-pallet in transports from suppliers with a long distance and even flow and in transports from suppliers with short distance and uneven flow. The loading ledge is made out of 100 % recyclable plastic.The purpose of this work is to find the most efficient set-up for recycling of loading ledges within IKEA on a European level from a transport and handling point of view considering aspects like cost, environment, time and, from an administrative point of view, user-friendliness.Who will the participants of the set-up be, where will they be located, which transports are needed and which income and costs does the set-up generate, are questions that will be answered.