When cylinders for motor saws are manufactured there are high demands on the cylinders strength and wearing qualities. Aluminum is a material with low density and is used by Husqvarna AB for their motor saw cylinders. The aluminum is strengthening with nickel that is attached to the cylinders through electrolysis. When aluminum is in contact with oxygen a film of oxide is formed. To eliminate the oxide and to prevent formation of new oxide zinc is used.

AbstractManagement is a field that started getting attention in the beginning of the 20th century by Frederick Taylor. His publication is called the Principles of Scientific Management and is based on the principles of using scientific methods to find the best way of conducting each operation within a production facility. Many of Taylor?s principles may appear obsolete today but the matter of an effective material flow is still highly current. Efficiency is the relationship between the input into an operation and its result.

This thesis project has been written and accomplished in cooperation with HABO AB. The objective of the project was to develop a standard stated packaging system. The background to this is that HABO is not pleased with the system currently in use. The system which HABO is currently using consists of to many sizes. The largest benefit of a standard stated system is that it becomes much easier to organize the packaging with the aid of a computer program.

Mulesing is a surgical husbandry procedure performed on lambs in Australia. The reason is toprevent severe fly-strike to the breech area, which otherwise risks to be soiled with faeces.This problem is mainly occurring in sheep of the Merino breed. Their fine wool is in demandworldwide due to high quality. Mulesing has been performed since the 1930?s, and eventhough alternative methods have been discussed nothing is yet generally accepted.

In today?s modern age, energy consumption has become a major issue, both from an environmental viewpoint and cost perspective. Because of a rapid technologic change and increased costs of production of electricity, the demand to develop effective methods for energy efficiency industries have grown.The electricity-intensive industries, such as plastic industry, the demand to reduce energy consumption has grown significantly over the past 10 years, which have led to the development of different methods to determine and locate energy-consuming parts in the industry. This also means being able to prioritize and organize activities in the industry.In this study the measurements of voltage, current, power and PF performance on injection molding machines (K-TEC 275 form Ferromatik Milacron in Germany) with a focus to locate, within a machine, various measures that could improve energy use in the plastics industry, in this case RostiGP in Gislaved. These measurements have been carried out with the help of a power quality clamp meter to carry out time logs of the machines for some time during normal word rate.

The aim of this study was to investigate the social behaviour and time budget of breedingbulls kept at VikingGenetics, Falkenberg in Sweden when the staff was off duty. It was ofinterest to see if there was any difference between bulls housed in group pens and bullshoused in individual pens. It was also of interest to investigate if there was any differencein the behaviour between the dairy breeds Swedish Red (SR) and Swedish Holstein (SH).Sixteen bulls were used in this study. Eight bulls kept in individual pens and eight bullskept in group pens were used. The individually housed bulls had a social gate with widerbars where the bulls could but their head and neck through to have social contact with thebulls in its neighbouring pens.

The logistic business Svenska Retursystem AB was founded by the Swedish retail sector in the year 2000, and their introduction of a grey plastic crate to the supply chain for perishable goods changed the situation for the swedish horticultural sector. The new system revealed several challenges to be tackled by all actors, from the small family firm to the bigger organisations. Whereas the initiative comes from the customer himself, from the horticultural sector ?s point of view, a refusal of the new packing is a hard decision to take. It is however interesting that a comparison between the two systems, shows in favour of the corrugated board boxes, not only concerning environmental aspects but also for economical and ergonomical reasons.

I dagens läge har energifrågorna väckt ett stort intresse i samhället. Nu fokuseras det mer på att bygga energisnålare hus. En betydande faktor som påverkar energiförbrukningen i våra hus är köldbryggor. De uppstår då ett material med dålig värmeisolering bryter igenom ett material med bättre värmeisolering. Köldbryggor är nästan omöjligt att undvika, dock går alltid att reducera.

The poultry red mite, Dermanyssus gallinae, is a common problem in poultry facilities, causing great discomfort for the hens and effecting the production economically. Few efficient acaricides are available and there is a need for new control methods since resistance has become a problem in some cases. The aim of this study was to evaluate the efficiency of the new liquid silica control agent Ectopar, on the poultry red mite. An initial in vitro test of Ectopar and its two components individually was performed, where live mites were sealed in together with filter paper impregnated with one of the three solutions prepared. The survival of the mites was thereafter recorded repeatedly during a period of 120 hours and compared to a control. For the field study, two poultry farms with different housing systems were used, one with furnished cages (farm 1) and one with a single tier floor system (farm 2).

Minskad efterfrågan på traditionella produkter från skogsindustrin kombinerat med ökad efterfrågan på icke-fossila material medför att företag inom skogsbranschen alltmer intresserar sig för nya produktsegment. Holmen New Business Development, en forsknings- och utvecklingsavdelning inom företaget Holmen arbetar med att utveckla produkter där trä kan ersätta traditionella alternativ. En möjlig produkt för avdelningen är Wood Plastic Composite (WPC), ett material som består av en kombination av en plastmatris och ett träbaserat fyllnadsmaterial som kan ges olika egenskaper vilka skiljer sig från rena trä- och plastmaterial. Syftet med denna studie var att undersöka hur designers och produktutvecklare inom olika svenska branscher ser på användandet och utvecklingen av WPC inom sina produktområden, både idag och i framtiden. För att undersöka detta har 18 kvalitativa intervjuer genomförts med företag inom möbel-, köks-, fönster-, dörr-, staket- och trallindustrin. Studien visar att ett lågt pris, hög beständighet mot till exempel röta, fukt och mögel samt att materialet går att bearbeta på samma sätt som trä är de mest önskvärda attributen hos framtida WPC-material. Miljövänlighet hos produkten är ett attribut som respondenterna tror kommer få större betydelse i framtiden men som kunderna inte är beredda att betala för idag.

Environment and sustainable development are very current topics in today's society, bothnational and international. The government's bill 2004/05:150 ?Swedish environment objectives - a common commission? contains several environmental quality objectives, that in turn is divided up in smaller secondary objectives. One of the secondary objectives says: ?Latest year 2010 shall at least 35% of the food waste from households, restaurants, largescale kitchens and shops be recycled through biological treatment.

This thesis deals with the development of a specification regarding a push-button, which will be used to control the gear-shifting function in an automobile. In addition to this the author will describe different techniques and theories that have been helpful in achieving data and results for the specification.Kongsberg Automotive AB, is located in Mullsjö, Sweden, the company supplies parts to the automotive industry. In the research and development department, R&D, there is a group that works with development of Shift-By-Wire systems. In an automobile with a Shift-By-Wire system the communication between the gear-shifter and the gear-box occurs electronically. The mechanical link is, in most cases, taken away and replaced by the digital system.

Intresset för småskaliga vindkraftverk på byggnader har ökat under de senaste åren. Allt fler människor blir mer energi- och miljömedvetna samt ser fördelarna med att elektriciteten produceras där den konsumeras; i den bebyggda miljön.Det är dock en större utmaning att installera ett vindkraftverk i urban miljö, jämfört med i öppet landskap, då det finns många faktorer som skall beaktas. Stadens komplexa uppbyggnad gör att vindens hastighet och riktning varierar och ger upphov till turbulenta strukturer i den omgivande luften. Många av dagens vindkraftverk kan ej operera effektivt vid turbulens, därför måste dessa vindkraftverken placeras på höga höjder för att nå den laminärt strömmande vinden över staden, vilket ger orealistiska längder på de master som krävs, även om vindkraftverket monteras på en byggnad. För att kunna utnyttja de vindar som uppkommer i urbana miljöer bör vertikalaxlade vindkraftverk med en helixformad geometri på rotorn användas.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

The top selection of Swedish beef bulls are evaluated yearly by Svensk Köttrasprövning AB at Gismestad. The bulls are selected from six different breeds; Angus, Blonde d´Aquitaine, Charolais, Hereford, Limousin and Simmental, and are kept on straw bedding apart from a concrete alley in front of the feeding area during the six months of evaluation period. The bulls are evaluated according to their fertility scores, growth, exterior and temperament and the exterior, body posture and claw conformation reflect important qualities for their longevity. In spite of good values for fertility, it has been noticed in the last years that the fertility results and longevity have been unsatisfactory and claw and/or bone disorders have been suspected as a contributory cause. Persson et al. (2007) studied breeding bulls from Gismestad and other places, which had been slaughtered due to poor fertility (no pregnancies in the herd during their last year in service).