The fork lifter chipper truck is a concept which has been developed for harvest and transport of bio fuel. The system consists of one fork lifter chipper truck and 1, 2 or 3 transport lorries, usually two, which serves the fork lifter chipper truck. The system is driven by the fork lifter chipper truck that produces chipped material into a container on the truck. When the container has been filled the truck drives to the landing site where it?s offloaded.

In conjunction with today?s increasing competition within the construction sector, more pressure is being placed on building contractors. Efficiency and improvements are necessary but without impairment to an ergonomic and safe construction site. This in is in order to reduce the construction costs and time but to retain the ability to deliver a high-quality contract.Various methods and prefabrication degrees are used, depending on the project's requirements and conditions. This analysis sets out to investigate and exhibit what qualifications are important when choosing a construction method for curtain walls.Advantages and disadvantages with each method have been analyzed and recommendations have been given to show when different methods are best suited.

In the early 80s, several new synthetic materials have come to be used in the treatment of canvaspaintings, among them Plextol D 360, Plexisol P 550 and Beva 371. Today, many conservatorsfind the information about the long term sustainability of these binding mediums to beincomplete. Evaluation of synthetic materials is mostly done through clinical research, sometimesartificial aging is simulated. The correlation between artificial and natural aging is however notestablished, useful information can therefore be gained through evaluations of actualconservation treatments. The intention of this study is to find out more about how thementioned products perform over time in normal museum conditions.

To regularly remove woody vegetation along the roadside of forest roads is an important part of the road maintenance, since the vegetation binds Moisture in the road side and, thus, the removal makes the road drying faster with results in improved bearing capacity. Vegetation removal also makes it easier to upgrade the road by material recycling from the ditch and, moreover, the visibility along the road is maintained.The aim of the study was to evaluate what type of chain flail is the best and most cost-effective for removal of different kind of woody vegetation along forest roadsides.Time studies were made on two chain flails when removing woody vegetation in three different classes; easy-, middle- and heavy shrub removal. The studied flails were one light and rather simple flail named Optimal M160 and a heavier and more advanced flail named Slagkraft H210. The removal was made according to Holmen Skogs? specification and the quality of the cleaning was measured by objective belt inventory.The productivity was higher with the heavy flail within all cleaning classes.

Arkitektfirman Kolman X Boye Architects har fått uppdraget att upprätta bygglovshandlingar för ett äldreboende. Det är ännu ej bestämt i detalj hur byggnaden skall uppföras men beställaren önskar att byggnaden uppförs i träbyggnadsteknik. Äldreboendet projekteras för 54 stycken lägenheter fördelat på sex stycken våningsplan och en total bruttoarea på strax under 6000m2. Ingen lika hög träbyggnad med denna verksamhetsklass avseende brand har tidigare uppförts i Sverige.Vår uppgift och utmaning i detta arbete har varit att reda ut problematiken kring projekteringen av exteriöra detaljer för höga hus i trä. Utifrån kända problem avseende brand, akustik och fukt har sedan ett antal detaljer som påverkar det estetiska uttrycket projekterats.

Cultural heritages are environments created by humans that are considered to have a conservation value for the posterity. They can be seen as one of society's non renewable resources. It is important to have knowledge of how cultural heritages are affected by future climate changes.The water flow in Uppsala is estimated to increase during winter and decrease during spring and summer. Precipitation will gradually increase as well as the intense short period precipitation. The average temperature is estimated to increase as well.

This study investigated potato growing in beds as an alternative to conventional ridges.It was based on results from field trials on bed-grown potatoes carried out by Halland Rural Economy and Agricultural Society in 2007, studies of literature and interviews with farmers with experience of bed growing of potatoes. Due to their shallow root system, potatoes are one of the most drought-sensitive crops. Potatoes are often grown on sandy soils with poor water-holding capacity. Factors such as total yield, tuber size distribution and quality defects are negatively affected when water becomes insufficient. Wide beds have a more flat top which leads to more uniform water infiltration. Further on, beds have lower soil surface area due to its shape, and therefore, retain water more efficient. In the field trials, which were carried out at the Stjärnarp Estate near Halmstad, potatoes were grown in beds alongside a conventional ridge-grown crop.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and Moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, power consumption, price, and assembly costs.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and Moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, power consumption, price, and assembly costs.

This report aims to examine the design of a passive house. The design addresses the selection ofmaterial, sizing and selection of both building services systems and building technical features suchas load-bearing framework and Moisture control. Interior layout is designed for a family of twoadults and one child.A big part of the report is devoted to an in-depth comparison of three different wall constructions ofpassive house standard. The structures that have been compared are a lightweight timber structure, aheavier concrete structure and a sandwich wall of the brand Weber Leca. The report covers variousaspects such as air flow, wall thickness, the risks associated with the construction, U-value, thermalbridges, power consumption, price, and assembly costs.

Works on transparent paper, also commonly known as tracing paper, have been described as ephemeral or temporary working documents and they usually number large quantities in archival and museum collections. They have therefore previously been considered of lower priority and can be found in poor condition due to a lack of treatment or suitable storage prospects. In addition, transparent paper can be very sensitive to Moisture and reacts by deformation or loss of transparency. Due to the volume of these works and the necessity of treatment, there is a call for simple and efficient conservation methods. A common solution in archives for the treatment of water-sensitive works on paper has been the use of heat-activated tissues as they can be applied without the introduction of solvents. There is little published about the use of heat-activated tissues on transparent paper and is mentioned only briefly in existing literature.

The project has been performed in a close collaboration with Hörsam who works in the field of hearing technology. In a first meeting with the company, the Project group was showed a few existing storage boxes for hearing aids. The company thought they were unnecessarily large with plenty of unused space and wanted a new, smarter solution to be developed.The project began with user studies in which audiologists, maintenance technicians, future users and others were interviewed. The purpose was to obtain their views on today's storage boxes and to find out how well the users maintained their hearing aids. It proved to be a large lack of knowledge regarding the management of hearing aids within the users.

Buildings today are built to maintain a healthy indoor environment and an efficient energy usage which is probably why damages caused by dampness has increased since the 1960?s.A study between year 2008 and 2010 showed that 26 percent of the 110 000 examined houses had damages and flaws caused by dampness that could prove to be harmful later on. This means that one out of four bathrooms risk the chance to develop damages by dampness. Approximately 2 percent of the houses had already developed water damages. It is here where the problems appear.

Aerated steam treatment is a modern and environmental friendly method for seed borne fungus sanitation, mainly used on cereals. The method involves exposure to heat and high humidity, factors which are known to induce a fast ageing of seeds, thus resulting in reduced storability. This thesis clarifies the interdependence between seed age and the aerated steam treatment intensities. Two studies were carried out in this thesis. In the first study the storage longevity of seeds treated with aerated steam was examined. The second study investigated the shelf-life of the pre-tests used to determine the aerated steam treatment tolerance of a seed lot, by testing the treatment tolerance of seeds aged prior to the treatment.

This study was carried out at the request of the Swedish forest company Sveaskog which is an important producer of logging residues (branches and tops) intended for energy production. The company wanted to increase the average dry content to 60 percent in their delivered logging residues. At the time when this study was initiated, the dry content in the chipped logging residues originating from the Bergslagen district was at 52 percent. The aim of the study was to find out how windrows of logging residues could be arranged in order to help obtain desired properties such as increased dry content. Sveaskog had developed a system for evaluation of windrows and a standardized form was utilized to describe different properties of the windrows.