This thesis is   focused on identifying and documenting all   electrical equipment, such as devices, power lines / cables, and connectors in the facility and also on presenting a brief   technical description and information of the systems around the reactors.   Furthermore there will be a brief description of LabVIEW - which is a   graphical programming language- and which devices / elements   are programmed. For further notification, I am not   responsible for the programming of the devices in LabVIEW   which I have only used as a tool in my work. The plant   for production of biogas consists of four reactors   of which the third reactor (Lakbädden)   is connected to another reactor (UASB)   where they cooperate with each other.   The reactors are used for producing   biogas in the form of methane gas.The reactors I and II are   connected to, various electrical devices as, flow meters, temperature   sensors, frequency converter and   more.

This thesis has been carried out to the Technology Group at industrial plant Tube Mill2012, which belongs to the Sandvik AB. Technology Group is a unit that takes care ofall requirements and suggestions regarding investigations, test runs and designmodifications. The main objective is to identify and analyze the existing initializationprocess to see where improvement opportunities exist and to come up withsuggestions for improvement, supported by previous research and literature. Anextensive literature search and case study has been conducted to provide a solidfoundation to refer to during the work. Completing the interviews and the workshopgave a clear picture of their unstructured work and approach, how the lowrequirements on the received orders caused problems for the group as well as thelack of a standardized resource allocation method provides major delay factors.Solution proposal then became a very easy process model in five steps with all theinformation gathered in one place.

The ISO standard ISO/IEC 17799/SS-627799-2 is a guidance for organizations to realize their information security goals. In spite of this standard, studies show flaws regarding information security in organizations. In particular flaws regarding overall view, knowledge and clear roles and responsibilities have been observed. The ISIT (Information Security Integrated Three level) model and its guidelines, developed in this thesis, help organizations to identify the required processes and procedures as well as the logical process flow. The thesis is based on theoretical studies and a case study within a multinational company.

This thesis project focuses on the need for better tools for analyzing competition for forest fuels in Sweden, in particular how policy measures may influence the market and involved actors in different regions of Sweden. Raw materials from the forest have for long constituted important inputs in the Swedish forest industry. Today some of these raw materials are increasingly used as inputs also in bioenergy production, largely driven by bioenergy promoting policies, and there are signs of increased competition for forest fuels which may have various and uncertain effects on the industries in question. The thesis project explores the possibilities to adapt previously used forest sector equilibrium models into a new model suitable for analysis of Swedish forest fuel markets, called the Swedish Forest Sector Trade Model (SFSTM). The approach takes into account regional differences in supply and demand for 23 types of products produced and/or used by eight types of producers, plus consumers, in five different regions (four Swedish and one international).

Globally, coastal ecosystems like mangrove forests, sea grass meadows and salt marshes are well known for their ability to capture and store atmospheric carbon effectively. In Sweden, there is still limited knowledge about local coastal ecosystems with similar functions, with alder swamp forests being an interesting example. Therefore, this study aimed to increase knowledge of the factors that can contribute to the potential carbon sequestering ability of alder swamps. Vegetation data and sediment samples were collected from a total of 37 sampling plots across four alder swamps in Bohusl?n on the Swedish west coast.

In the thesis we have shown that it is possible with current technology, to buildneighborhoods that are largely self-sufficient. We have obtained some information aboutongoing work in the field of energy efficient buildings and active house which we have usedto develop a model. The feasibility study for Ranagård we have e.g been forced tofollow laws on groundwater covered, resulting in the construction of basements for singlefamilyhome is not possible. The model that we have built up overtime has been the central part of the work. The model illustrates very well what an activehouse neighborhood means and potential of such an area.

AbstractIn this thesis we aim to extend the current theories about a concept called persona. A persona is a model of a user, mostly based on qualitative research and made with such accuracy that it to some extent can be used as a replacement of a real user in a development process and as a communicative tool. We will present a way of constructing this persona without meeting the actual users and follow up with interviews from the organization using them. This will lead to a model over the process of introducing personas as a concept in an organization,previously not familiar with the concept. The model is adapted to also work for projects and organizations where the concept is already known..

Nine out of ten larger companies have an intranet today which is supposed to improve the communication withinthe company and save money. A great part of these intranets were established in the beginning of the 1990?swithout giving any thought to the users and their needs. How does the communication inside the corporationslook like when the intranets that are supposed to be the source for every information request, aren?t usable? Whatother sources do the users use and how much?The aim of this master thesis is to examine information source selection at a specific company.

I?ve tried to find the most effective and cost effective way to harvest straw for energy recovery.You can choose between round bales and big square bales. Square bales are the cheapest way to produce straw for fuel recovery because you can optimize the length of the bales so they fit the transportation equipment.In the Malmö area the average days of harvesting hay is 55. The effectively of transportation depends mostly of the speed, the distance and density of the bales. To increase the capacity of bale transportation larger loads and higher density of the bales is necessary.

Context: During the 21st century several alarming reports have been published that deals with the depletion and pollutant of the earth by human interference. The earth is an ending resource and so are the mountains and bedrocks which are continuously mined in order to harvest its minerals. The idea behind Urban Mining is to (re)invent processes enabling further purpose for materials both from old deposits and new products providing secondary raw materials and energy. This thesis aims to investigate the challenges and opportunities of how firms and organizations can and will be able to strike a better balance between product-/service systems, economic growth and environmental stewardship in the context of Urban Mining as an approach. With the innovation of processes, technology, business- planning and creation in focus.Objective: How to future proof a business model for Urban Mining by the usage of business model design.Method: This thesis will be conducted using a case study approach, meaning that it will incorporate qualitative, exploratory and descriptive characteristics - aiming towards enabling both applied and fundamental research.Results: The result evaluates the business model element differences between traditional C&D industry and Urban Mining industry.

SMC is in the process of developing a micro simulation model. The existing micro simulation model developed at Cornell University for US data, CorSim, is one of the fundamental parts for the new micro simulation at SMC. To develop the Swedish model, Swedish data on all individuals in Sweden during 11 years are also available. These data are organized in a database. This paper describes the process of rebuilding the database to a more useful structure.

This Master?s Thesis aims to investigate and assess the methods used to decrease the discharge ofmetals, primarily copper, from the water purification plant at Assa Industries plating factory inEskilstuna.Literature studies of the purification methods precipitation, ion exchange, evaporation, reverseosmosis and electrolysis has been done to appraise the adequacy of the technique. Thesetechniques are commonly used for purification of industrial waste water.Assa has four plating lines: the Trumline, the big Zinkline, the new Zinkline and the Decorativeline. The new Zinkline is the most modern of the four lines and purification is done byrecirculation over an ion exchange unit. The demand for fresh water is thereby heavily reduced.The Trumline, the big Zinkline and the Decorative line all use older techniques.

The borehole heat exchangers of today suffer from poor thermal and hydrodynamic performance. The purpose of this thesis is to improve the performance of ground source heat pump systems and thermal energy storages by increasing the energy efficiency of the borehole heat exchangers. For this reason, the annular coaxial borehole heat exchanger (CBHE) has been analyzed. This type of heat exchanger is interesting in terms of both thermal and hydrodynamic performance. A model has been set up in the program Comsol Multiphysics in order to investigate the heat transfer characteristics along the borehole.

At Volvo Cars Torslanda's paint shop there is a requirement to in a fast and effective way get an overview of the plants capacity. Therefore a capacity template was constructed as a tool for the engineers at Volvo several years ago. This template has during the years become complicated and outdated. Thus this thesis work will resort as a new capacity template, built from scratch. The new template has been built up based on requirements from Volvo and the concept of OEE (Overall Equipment Effectiveness).

This thesis evaluates the user board of the elememtary school in Veberöd, Sweden. In this process an evaluation model is developed. The model itself gets evaluated in a meta-evaluation to improve the model for future use.The starting point of the evaluation is the deliberative democracy theory. Although Sweden is a representative democracy an official desire exists to have a democracy with deliberative qualities. The evaluation model is constructed to fit this context and is therefore, not only, set out from classical goal-based evaluation but also from deliberative democratic evaluation.