Tomo Hugglink (TOMO Skog) is an innovation for harvest and transport of biofuels. The system consists of a truck, a chipping unit and crane mounted on a link and a wood chip trailer. The system works in such a way that the chipping unit is disconnected and placed on the site and wood chips are loaded directly into the wood chip trailer.The aim of this study was:- To examine the performance of the TOMO Hugglink system under different conditions such as the size, placement and quality of the pile.- To calculate the cost per raw ton for two vehicle combinations at different transport distances and to examine the effect of a reduction in set-up time and an increase in load weight.- To identify possible improvements with the TOMO Hugglink system.A time study was conducted within the thesis work to make it possible to determine production and time consumption. In the subsequent economic analysis the cost per tone at different transport distances was calculated for two different lorry concepts. Furthermore the effect of a reduction in set-up time and an increase in load weight was calculated.Under current conditions the utilization of the chipper is low and only 29 % of the total system time is occupied by chipping.

This master thesis is about a place that has a story to tell. Olsson?s garden came about when Mr Carl Oscar Olsson acquired a piece of land in Landalabergen in the beginning of the 1930's and at that time he started his industrious work of uniting much of Sweden's flora in his garden. Since the very beginning Olsson's garden has played a lot of different rolls in a variety of situations and meant different things for different people. Today one can find traces from Mr Olsson's life and deeds in the garden.

This paper is a study of corporate governances in the municipal of Stockholm. The purpose of this paper is to enlighten the problems and opportunities for the corporate governances of the wards in the municipal of Stockholm. The municipal of Stockholm is made up of 18 relatively self-governing wards, whose activities bear a resemblance to one and other. Therefore we have specified our survey to corporate governances in the ward of Skarpnäck (Skarpnäcks stadsdel), to be able to use this ward as an example to corporate governances in the entire municipal of Stockholm. The essay emanates from the important management theories: Budget, Integrated Management system (ILS), Benchmarking and Balanced Scorecard.The essay is based on interviews and a poll survey we conducted in the administration of the ward of Skarpnäck, and also based on interviews with Stockholm?s city hall.

This report focuses on the upper slit. The upper slit is located between the impeller andthe drive unit. The slit design depends on pump type and application. However it isuncertain why the design varies, The purpose of this report is to clarify why the designvaries and to recommend an improved slit design.A research has been done; information was gathered from interviews, but also fromsearching of databases and studies of drawings, reports and documents. The originalpurpose of the slit was to prevent twining around the driveshaft, and prevent dirt fromentering the cooling system.

The purpose of this project was to create a system which can handle issues, with other words an issue tracking system. The system must create issues, assign issues to a specific user and list all issues for each user. On top of that, each issue should have a log where users can log whatever they want.My part of this project was to implement a client which can fulfill this basic criteria (and a bit more if possible), and communicate with the server which has procedures to be executed by the client.This system is based on Android and has it purpose to be used by mobile devices which support Android. ?Ichnaea? as the system is called, is meant to be used by companies to have human interaction through the network..

This report is a thesis for collegeengineering program in structuralengineering at Uppsala University andwas commissioned by the Swedishcontractor Svevia. The study aims toprovide an overview of the mostbeneficial bridge material from bothenvironmental and economic point ofview.The life-cycle analysis covers onlycarbon dioxide emissions, since it isthe most spoken of in today?s climateagenda. Furthermore, this study aims tohighlight which parts, of the systemboundary, that contributes to greatercarbon emissions for the wood- and theconcrete bridge.The life-cycle cost analysis wascalculated with a lifespan of 40 yearsand covers the basic cost of investment,operating and maintenance, anddecommissioning costs.The analyzed constructions in this studyare existing projects that are almostcompleted. Both bridges were designed tohandle loads up to 60 tons.

This thesis is a case study with a qualitative approach. The company examined is The Astonishing Tribe (TAT) making user interfaces for mobile phones. The company has had a growth of 1453% from 2002 until 2006. We have examined what are the key factors for keeping innovation while growing. The most significant factor not supporting innovation within the case company is the will to take calculated risks.

Our project is divided into two parts, one production and written report. The main focus was the production part, were we used PHP to create simple solution for handling SMS and MMS with direct communication with the mobile operator server. We communicate with sockets and can handle CIMD2 and MM7 protocol. To get our components easy to use we have created two classes to handle SMS and MMS. To demonstrate our technical platform we created a website were you can create an account.

Network RTK is a real-time technique for accurate positioning with Global Navigation Satellite Systems (GNSS). The technology means the use of correction data from a network of GNSS receivers with known positions (reference stations) to reduce the uncertainty in position for the user´s GNSS receiver (rover). However, this requires that the correction data can be transferred seamlessly to the user in real time. Commonly the corrections are transferred via mobile phones. The Swedish National Land Survey operates a nationwide Network RTK service, where users can receive correction data via GSM or mobile Internet (GPRS).

The lack of fresh and clean water today causes severe problems, mostly in developing countries. Waterborne diseases like typhoid, cholera, amoebic dysentery and diarrhea create health problems and deaths among people. There is a need for low cost interventions like household-based water treatment and safe storage (HWTS). Solvatten AB is a Swedish company based in Stockholm. Their product, Solvatten, is a household water treatment unit that can treat water containing viruses, parasites and bacteria.

The aim: was to describe and compare a group of experts and critical care nurses' agreement in detecting delirium in intubated, ventilator treated patients with sedation / analgesia, before and after an in house training intervention with the instrument Confusion Assessment Method for the Intensive Care Unit (CAM-ICU).Method: A quasi-experimental study, one group pretest - posttest design. A convenience sample of 17 critical care nurses in a general intensive care unit included. To detect delirium the instrument CAM-ICU was used, 21 paired tests before and 22 after an educational intervention.Main Results: The results showed that after an in house training intervention sensitivity and kappa coefficient improved of the characteristic 1 "acute onset and fluctuating course," an improvement that was significant. In other features, and overall values were signs of numerical improvement and deterioration in sensitivity, specificity and kappa coefficient but no significant change.Conclusion: Implementing a new instrument for detecting delirium in clinical practice requires education and follow-up. A small sample of critical care nurses with varying ability to use the new instrument and the fact that patients' status may change rapidly making it difficult to draw any conclusions from this study.

Reducing the CO2-pollution, resulting from the combustion of fossil coal for energyproduction, is important to affect environmental changes. One way to achieve a reductionis to use the oxy-fuel technology. The technology uses O2 and re-circulated flue gasduring the combustion which results in a flue gas mainly consisting of CO2. The flue gascould then be compressed and stored without environmental effects. A problem thatfollows from the compression is the risk of acidification in sensitive parts of the process.Acidification can occur because of reactions following from the contact of condensedwater and sulphur- and nitrogen-oxides which are also present in the flue gas.This report compiles and evaluates the basis of a scientific unit with the purpose ofexploring the possibilities of extracting impurities of SOx and NOx from the flue gases.The dimensions of the unit are based on basic conditions, defined for an existing oxy-fuelprocess at Chalmers, and on the results of computer modelling.

This master thesis is made of two parts. The first part concerns the method and results ofdesigning a motion control system for a piece of research-equipment called BIRGIT. Theequipment is made to be used for research on eyemovements. In the second part, a computermodel of a part of the balance organ in the inner-ear is developed. The work has been done atthe Bernadotte laboratory at S:t Erik Eye Hospital.The equipment the control system is made for is a so-called rotationchair.

Detta arbetes uppgift är att konstruera ett redskapsfäste för en lastmaskin av modellVolvo BM 840. Lastmaskinen är idag försett med ett gammalt mindre bra fäste, denbehöver därför ett bättre, modernare och mer användbart redskapsfäste med hydrauliskredskapslåsning. Den typen av redskapsfäste som ger detta är ett Stora BM-fäste. Föratt få rätt mått har måttuppgifter tagits på andra maskiner och redskap. Resultatet blevkompletta ritningar för att kunna tillverka delarna till fästet på en verkstad.Hållfasthetsberäkningar har gjorts på de viktigaste ställena..

This report documents the development of a software system for automaticscheduling called Hazel. This system is comprised of a server where an automaticscheduler has been implemented, as well as a web and mobile applicationthat allows users to interact with the system. The scheduler hasbeen developed with the functional programming language Haskell and usesa SAT-solver.Manual scheduling has long been the bane of managers everywhere, asmatching the needs of the employer with those of the employee is often adifficult and time-consuming task. There already exists several automaticschedulers that attempt to solve this problem. The issue with said schedulersis that thay tend to be expensive, or developed to only fulfill the needsof a particular organisation.