Ticks and the diseases they transmit are of major importance throughout the world. In Uganda, cattle are the most important livestock from an economic point of view. Livestock keepers fear bi-directional transmission of tick-borne pathogens between their livestock and wild animals. This cross-sectional study was conducted to establish and compare the sero-prevalence of the tick-borne pathogen Babesia bigemina among randomly selected Ankole Long-horned cattle and European crossbred cattle on 30 farms in Kiruhura district, in two sub-counties near Lake Mburo National Park in South-western Uganda. Half of the farms were situated in close proximity to the park and thereby housed cattle with more frequent wildlife-livestock interface (Sanga), whereas the other half had less frequent contact (Kikatsi).

Syftet med detta arbete är att upprätta en demonstrationsplattform för Vattenfall vattenkraft ABs tillsyns- och kontrollarbete i vattenkraftstationer. Detta i form av en handdator med tillhörande mjukvara. Denna handdator ska påvisa möjligheterna med moderna handterminaler och innehålla utökad funktionalitet gentemot den nuvarande handterminallösningen. En fördjupad förundersökning av passande mjukvara och hårdvara genomfördes. Arbetet inriktade sig sedan på att utöka, med extra funktionalitet, och anpassa en befintlig programvara (Blå Coordinator).

This master thesis is an attempt to study the interface in itself, where the human meets the machine and the problems that can arise. I study a particular interface, namely the OPAC of Libra III. In 1999 IFLA presented recommendations for what an OPAC shall contain, and in one part of my master thesis I compare Libra III with these recommendations from my opinion. In another part of my master thesis I make an investigation where I let five by me chosen persons answer some questions from me, both by doing and verbally. I draw the conclusion that Libra III follows most of the recommendations of IFLA in a sufficient way.

The most common method for identifying merchandise in the commerce is by barcodes. Symbian OS is an advanced operating system aimed at cell phones and the most commonly used in smart phones. Opportunities to a full range of new services are given through barcode recognition in a Symbian OS based device. Therefore the purpose of this degree project was to create an application which would contribute to a future solution aimed at shopping where the cell phone constitutes a reader of items? identification numbers.

Today we see a fast developing of the market for mobile communication, both in an increased and changed mobile use, but also in the development of new technologies and services. Much that can be performed on Internet/Intranet today with a PC will in some years also be possible to do with a mobile terminal. Mobile Internet will probable take place when new technologies as GPRS, EDGE and UMTS will be in use. These technologies in combination with the development of new terminals and services will bring new capabilities for both companies and private users. This report describes how a portal should be designed in order to meet the needs on the market.

The purpose of this thesis is to investigate how Digital Signage systems such as public info kiosks can be designed to better fulfill its main use; to enlighten, encourage and influence the public with information. The challenges presented from earlier studies shows that the public interests and goals, together with proper and relevant content displayed in info kiosks have impact on the attention the public have towards public displays. Qualitative methods such as interviews, usability testing and observations were conducted to further examine how a public info kiosk can be designed to draw attention and grow interest amongst students at K3, Malmo University. Usability testing were used on the digital prototypes that were developed to ensure that the gestural user interface meet the requirements of a proper interaction from the users. Important insights were made concerning; the attention and interest to relevant content, the aspects of the gestural user interface along with the placement of the info kiosk in terms of context.

The aim of this thesis is to examine user experience and engagements in interactive cinema.A great deal of the research that is conducted today involves creating interactive films, toexplore and examine film structures. In this study, we build on this research by comparingthree different interactive film structures. To carry out our study, we have categorized threedifferent interactive films after three different models to define their narrative structureand interface. To examine the experiences of those structures we have performed anexperiment where we have collected data from the three different sources; interviews,observations and surveys.It is difficult to draw conclusions about how an interactive film should be constructed asdifferent structures apply to different narratives. Based on our research the conclusion canbe made that the combination between the narrative structure, the narrative content, theaesthetics, the implementation of interactivity and how the film?s interface is constructed ismore important than building a specific structure for an interactive film.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

The purpose of this project was to investigate whether it was possible to develop a type of application, where users would solve chess problems. The main goal of the project was that there would exist an functional application after the study has ended with which users could solve chess problems on a computer. One subgoal of the project was to create corresponding application for mobile phones. The study was limited to require users to have at least Internet Explorer 9 +. For other browsers, there were no corresponding limitations.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

Scania provides a fleet management system for hauliers who want to control their fleets in anefficient way. The system includes an onboard computer with touch screen called ScaniaInteractor where the driver can access GPS navigation, order support, message service and otherfunctionalities. The purpose of this thesis is to develop a concept for logging the user interactionon the Interactor and analyze the result which enables further development and optimization ofthe interface.A demonstration application is designed, implemented and tested for the purpose of showing thepossibilities and difficulties with logging of interaction. The result shows that logging is quiteeasy to implement and that the amount of produced data is small and therefore not expensive totransfer via GPRS to a central server where searching and analysis can be done. On the otherhand, the biggest challenge lies in the analysis and interpretation of the logged data and to applyit to the development of the interface.

Det här examensarbetet utvärderar utvecklingsverktyget Gideros som används för att tillverka spelapplikationer. För att utvärdera har en app tillverkats och Gideros har jämförts mot andra spelutvecklingsverktyg..

In this project a LC-MS-method for the analysis of gamma-hydroxybutyrate, gamma-butyrolactone, 1,4-butanediol, amphetamine and methadone was developed.Initially, the efficiency of the ionisation of the analytes was evaluated with respect to the ionisation technique (ESI, APCI and APPI) and the composition of the mobile phase. In the next step a number of different columns was tested in order to find the one with the greatest potential for separation of the substances in question. Using the selected column, the separation was optimised by means of experimental design and the software The Unscrambler 7.8. The parameters studied were the flow rate, the column temperature and the mobile phase composition. The response variables were the resolution between the target compounds and the retention time of the last eluting compound.These experiments showed that, in order to obtain the best ionisation, the mobile phase should consist of 5 mM formic acid in water and acetonitrile.

The objective of this study has been to examine which significant values are of importance in the telecom sector today, and in a continuing perspective yet to be. To ensure the factors of relevance in the study, we have identified three purposes: - Our first purpose is to clarify the eminent values in the competitive market of the mobile phone operators today, and the reason for its importance.- The second purpose is to understand the function of the brand regarding to value creation and loyalty in the sector of mobile phone operators.- The third purpose is to explore the potential approaches for mobile phone operators to increase value.In this study, our approach has been a qualitative methodology by conducting seven interviews with respondents related to the telecommunication sector.As a result of the process, we find the need to divide the concept of value into two dimensions, which we entitle organizational related values and customer related values. We have found the values related to the characteristics of the market in aspects of its infrastructural features but also in regards to the homogenous core service.Our findings in the empirical data with support to our theoretical frame of reference, is the current highly important organizational related value of constant high result quality (well-functional technological aspect), and the value enhancer by a low price; the strategy of bundling also results in higher value. This result in customer related values that perceives as safeness, availableness and convenience. The brands are a significant source of customer related values with identity value, image value and assuredness. A continued advancement in process quality and individualization will imply greater customer related values of closeness, freedom and flexibility. .

Mobiway AB är ett Sundsvallsbaserat företag som har utvecklat en tjänst föradministrering och bevakning av elektroniska parkeringsbiljetter. De vill nuexpandera sin verksamhet och skapa en egen parkeringstjänst ? en elektroniskparkeringsskiva. Mitt uppdrag har varit att utveckla och utvärdera enelektronisk parkeringsskiva för mobila enheter byggd i jQuery mobile. För attskapa en så användarvänlig och smidig sida som möjligt kommer alltinformationsutbyte att ske med AJAX kommunikation mot en RESTwebbtjänst.Projektet består av utveckling och utvärdering av en mobilwebbklient, en affärslogik byggd som en REST webbtjänst, en databas för attlagra all information samt en kundtjänst för att administrera tjänsten.Utvecklingen kommer att ske med en agil utvecklingsmetod.