What are the basic thoughts formulated in the Heraclitean fragments? A cosmology, a philosophy of nature, the idea that all can be reduced to a single substance? There is always a risk that Heraclitus is fitted into a thought pattern he doesn?t belong to, if we ? from our present horizon ? focus on continuity in an attempt to frame his thinking as part of an overall progress, running from the so-called pre-Socratics to Aristotle, in the history of philosophy. If we picture the dawn of Western civilization as an early development of scientific thinking, built on a gradual and continuous growth of knowledge, we will easily go astray as we try to discover the Greek origins of philosophy. Assuming, for example, that the readings of Heraclitus as a natural philosopher have come to a dead end, can we approach the fragments from a different angle?The aim of this paper is not to give a systematized reading of all the remaining fragments of Heraclitus, but neither to necessarily contradict the various interpretations that emphasise how these shattered remains reflect a coherent philosophy.

Soil properties affect the chemical composition of soil water. When studying transport of chemical substances through a basin, it is therefore important to know from which soil layer the main part of the runoff is generated. The aim of this study is to develop an HBV/PULSE model with merged soil moisture and response routines, which generates good approximations of groundwater levels. It should be possible to extend the model to simulate transport of substances and take into account which soil layer the groundwater level is currently in. The hydrological version of HBV/PULSE is used since there is no need to account for pH or alcalinity at this stage.

Thermal fatigue is a serious problem in todays power plants. A large amount of damages around the world circles around that subject. The damage can come from the mechanism of two flows mixing with different temperatures in a T-junction. It is a fundamental prerequisite that these T-junctions are frequently tested for damages. An amount of criterias steers the rate of testings.

Studiens målsättning var att utvärdera kvalitén hos hingstsperma selekterad med hjälp av Single Layer Centrifugation (SLC), med huvudsyftet att studera den mitokondriella membranpotentialen (??m) och förekomsten av reaktiva syreföreningar (ROS) hos hingstspermier före och efter SLC. Ett insemineringsförsök med SLC selekterad och rutinspädd sperma genomfördes även på ett litet antal ston, men inga slutsatser kunde dras av resultaten. Humanstudier har visat att spermier med låg ??m mer frekvent har återfunnits hos män med fertilitetsproblem. Mätning av ??m har gjorts genom att tillsätta den lipofila JC-1, vilket i både studier på både humana- och ekvina spermier har visat sig vara en känslig metod för att särskilja spermier med låg respektive hög ??m.

Kontroll av zinkskikt på monterat räckesmaterial som görs ute i fält saknar en fastställd metod. Zinktjockleken har ett minimum tjocklekskrav enligt den svenska standarden ISO 1461:2009, som bestäms av dimensionen på ståldetaljens tjocklek. Trafikverket begär att med hjälp av detta examensarbete kunna begränsa antal mätningar på plats, då kan det ta allt för mycket tid och arbetsresurser i fall det skulle behövas kontroll av väg-och bro räckesanläggningar från beställaren.Sannolikhetsläran och stickprov i statistik hjälper oss att begränsa antalet mätningarna på skyddsanordningarna som görs ute i fält. Med hjälp av normalfördelning kommer man fram till den efter strävade metoden, som med en rimlig arbetsinsats ger en rättvisbild av skikttjockleken på monterat räckesmaterial.Vid variation av varmförzinkaren på vägräckesanläggningar undersöker man varje leverantörs räckesdel för sig, alltså man mäter zinktjockleken på en varmförzikare för sig, kontrollerar zinkskiktstjockleken på de och tar slutsatser sedan går man vidare till nästa tillverkare. Om vägräckena är mindre än 30 stycken mäter man zinktjockleken på respektive anläggning.För beräkning av zinkskiktstjockleken på monterad räckesmaterial börjar man med 30 mätningar och användning av den centrala gränsvärde satsen för att approximera till normalfördelning och analysera resultatet.Det slutliga resultatet av examensarbetet är ett Excelprogram med inmatade formler.

Today´s roofing of dwelling houses is a very time consuming procedure, which includes a lot of different steps on the construction site. Not only does it cost a lot of money, but often do problems with rot and mold occur in the attics of houses today. The use of prefabricated modules has seen a great breakthrough in the field of construction of dwelling houses; at least when it comes to foundations and walls, where this type of approach makes the construction process way more efficient. What no one previous has succeeded to develop is a corresponding system for roofs that meets the demands of a dwelling house. Accordingly the goal of PlusTak has been to come up with a proper module system for roofing of dwelling houses, where the roofing is completed to meet the demands of the Scandinavian market. During the project a lot of effort has been put into customer contacts and the usability of the product, as well in the manufacturing process as on the construction site. This development has gone hand in hand with several practical tests and tryouts.

Ecolean Development AB are developing and manufacturing filling machines for pasteurized liquid food products. Because of lack of any appropriate supplier of box closer which seals boxes with small flaps, they have decided to start a project to develop a prototype of a box closer. Due to long experience from industrial automation I have been given a chance to develop control system for a box closer. Degree thesis involves electric design in ELPROCAD ic PRO and programming of PLC (programmable logic controller) and HMI (Human Machine Interface). The report describes degree project from the project plan phase via the development phase to the conclusions.

Background: The most energy efficient houses today are so called passive houses. These houses achieve high energy-efficiency partly by having well insulated walls. U-value describes the amount of heat transfered through a building element, the more insulation, the smaller U-value. A typical passive house wall have a U-value of 0.10 W/m2,°C. The passive houses are primarily made as small family houses and not as a block of apartments.

Abstract This degree project examines how much carbon dioxide that emits during the construction phase of a road project. This is to make it possible to compare how the amount of carbon dioxide differentiates between traditional road construction and Swepave construction, which is PEAB?s alternative way to design roads. To make the comparison a calculation tool has been produced. To compare the amount of carbon dioxide emissions a reference project was needed.

Freshwater ecosystems have long been neglected as an important part of the global carbon cycle. However, research shows that most of the world?s lakes are net-heterotrophic and consequently emitters of greenhouse gases to the atmosphere. In many boreal and north-temperate lakes, most of the yearly emissions usually occur in spring, shortly after ice-thaw. The aim of this study was to quantify the flux of carbon dioxide (CO2) and methane (CH4) in three boreal lakes, during this annual event.

Oilseed rape constitutes a good break crop within a cereal dominated cropping system. The normal sowing time for winter rape in Sweden is August. It's a time in the cropping year characterized by a heavy work load, such as harvest and soil management. In addition, it is often a period with large precipitation. Thus, it is sometimes problematic for the farmer to do the sowing of winter rape at the optimal time.

In recent years, the Swedish railway track system has been neglected in terms of capacity and maintenance. To adapt the existing system to current traffic load there is a great need for extensive improvement and maintenance. Shortcomings are especially occurring on older embankments running over soft subgrades. To select the most suitable method for reinforcement of the embankment, it is important to evaluate different solutions from a life cycle cost perspective. In long-term perspective, it is often shown that a method with low investment cost causes a higher maintenance cost and a shorter technical lifetime.

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

Nowadays naval units are participating in international missions, where new and in many cases tougher conditions will affect their propulsion. This essay deals with some of the now developed nanostructure coatings and gives a presentation of how the coatings could function on some exposed parts of the naval powertrain. The essay investigates the possibility that the coatings can be used as a protective layer that will reduce or prevent wear on selected parts of the naval powertrains. As a basis for the essay, nanotechnology is described, as well as different reasons that wear occurs and application techniques for coatings The conclusion is that nanostructured coatings can be applied and provide a much better result on hardness and wear resistance as of naval powertrains compared to micro-structural coatings, both for manufacturing and renovation. The essay presents a few examples of the military utility of the nanostructure coatings as well as suggestions for further research..

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.