Sök:

Sökresultat:

111 Uppsatser om Mine clearance - Sida 2 av 8

Nils Lindbergs körmusik : Analys av tre stycken ur "O Mistress mine".

Nina Fredriksson: Nils Lindbergs körmusik. Analys av tre stycken ur O Mistress mine. Uppsala: Musikvetenskap, 60 p., 2002.Uppsatsens syfte är att studera Nils Lindbergs sätt att komponera för kör. En central fråga är hur de framträdande stildragen i musiken skapar och påverkar musikens expansion och avspänning. Som analysmaterial har använts tre stycken ur körsviten O Mistress mine.

Bruket och arbetarna : Arbets- och anställningsförhållanden vid Åtvidabergs kopparverk 1800-1890

This paper illustrates the working conditions at the copper factory in Åtvidaberg during 1800-1890 from different views. The highest salary was given to the building contractor. Thereafter came in order the rust turners, the garmaker, the melter, the ore booker, the factory supervisor and the garmaker hand. Also the rest of the working conditions for different employees might differ from each other in this order. The mine workers generally earned a little less than the other workers at the factory, and especially the workers in the Bersbo mine.

Finngruvan - Uppföljning av vattenkvalitet, analys avavrinning och recipienter i området efter gruvdrift

This thesis raises the problem with acid mine drainage around the closed mine Finngruvan.The purpose of the investigation was to compare metal content in surface water in the areaand its catchments between year 2010 and 2003, also to make calculation of specific runoffand metal load, furthermore determine the recipients in the area. Surface water samplingwhere preformed at the same place as 2003 and also at a few other places of interest. Adigital elevation file were used in GIS to calculate the area of the watersheds in the region,observations in the field where also made. The collected data were used to make comparisons,calculations and conclusions. The result showed that the surface water 2010 had somewhatlower metal concentrations.

Montageplattform : För inredning av två vertikala ventilationsschakt i Garpenbergs gruva

The company Bergteamet, Boliden, Sweden, is installing ventilation shafts of the Garpenberg mine. For such work a platform is needed which you can stand on and work from. The Shaft Reinforcement Team at Bergteamet performs the installation work and is the sponsor of the platform. The project described in this report is performed at the department MEC, Mining Equipment Construction, which has been given the task to design and construct the platform, customized for the current shaft. After this the platform is manufactured and inspected at the workshop at Bergteamet.The design work was carried out as follows:- After an initial meeting a requirement specification was worked out, describing the problem and previous experiences of platforms and requirements for the design and equipment.- A concept sketch was developed with consideration of surrounding factors.- A constructed 3D model was presented along with the choice of materials.

Guld i Sverige - Från urtid till nutid

The Earth and everything else in the universe was created in the Big Bang around 14 billion years ago. A point with tremendous density and mass began to expand and more and more atoms began to form. From the first and lightest like hydrogen and helium to heavier atoms such as iron and eventually gold. The formation of the Earth occurred about 4.6 billion years ago and so the first gold atoms were concentrated only here. It is however believed that much later in Earth's history an extra supply of gold occurred thanks to massive meteorite bombardments.

Falu gruva och hållbar utveckling

AbstractFalu Copper Mine and Sustainable DevelopmentKarl-Markus AnsnaesFalu copper mine was Sweden?s oldest mine industry which lasted for almost a thousand years. Throughout the history its area has been vastly contaminated by sulfur oxide. The contaminations has created the mining area to an environmental risk zone which has the ability to spread out into the Falu River. The river has its connections to the Dal River which is discharging towards its mouth in the Baltic Sea.

Gruva eller renar? : En deliberativ analys av deltagande i beslutsprocessen vid en gruvetablering i Storumans kommun

This thesis examines the conditions for participation in the decision making process of a possible mine establishment in Storuman municipality in the north of Sweden. This is done through a case study where the main actors are the mining company Nickel Mountain AB, the municipality Storuman and the Sami village Vapsten. As a theoretical framework Cecilia Eriksson?s division of democratic theories is used as a starting point. Methods as described in deliberative democratic theory, such as discussion by effected community members, are seen as a method within the participatory democratic tradition, not a theory of its own.

Geokemisk undersökning vid Rävlidmyrgruvan, Västerbottens län : provtagning, analys och förslag till åtgärder

The mining industry, in terms of ore excavation and metal production, is and has been important to the Swedish economy. In connection with the ore excavation process, large amounts of partly sulphidic waste are produced. When the metal sulphides are exposed to air and water they are eventually oxidised, which leads to the formation of acidic water with high concentrations of metal cations and sulphate ions, so called Acid Mine Drainage (AMD). This water may reach the nearest surroundings and cause negative environmental effects. By covering the waste with soil or water, the oxidation process can be minimised. At the Rävlidmyran mine in the county of Västerbotten open pit mining took place between 1951 and 1991.

1-D Modellering av Piezoelektrisk Injektor

A piezoelectric injector was modeled, in this Master Thesis Project which was carried out at Scania CV AB in Södertälje, in GT-Fuel. GT-Fuel is simulation program from Gamma Technology.The simulation model for the piezo injector was divided into a hydro-mechanical system and an electrical system (Piezoelectric element). First the hydro-mechanic model was duplicated from Advance Continuous Simulation Language model (ACSL). The simulation results were then compared to the ACSL, to verify that the hydro-mechanical system was modeled correctly. The simulation results for the electrical model were also compared with a Simulink model.

Scenografi till Batboy - the musical

This is the project of making a stage design for Batboy ? the musical, a cooporation with a network of musical artists. The aim of the project was to create a space on stage that strengthens and expands the experience of the story told, and find design solutions that give an extra dimension to the story. The prerequisites for my work were partly defined from the produc¬tion, as were my limitations. In the cast of ten artists some were to play more than one role, often one of the opposite sex.

Primär ciliär dyskinesi som orsak till kronisk lungsjukdom hos hund : en litteraturstudie och fallpresentation

Primary ciliary dyskinesia (PCD) is an important but unusual cause of chronic respiratory disease of young dogs. The purpuse of this paper is to study and present internationally publicated papers on PCD in dogs and present three dogs, in which PCD was suspected. PCD has been reported in many dog breeds as well as in people. In dogs an humans, PCD is caused by inborn genetical defects which causes structural and functional abnormalities of cilia in the respiratory organs and other cilia in the body. Situs inversus occurs in about half the cases in people and probably in dogs as well. Respiratory signs usually predominate.

Landvinning : scenarier för efterbehandling och gestaltning av Aitikgruvan, Gällivare

Open pit mining creates huge amounts of tailings and waste rock deposits. Due to it's content of sulphide minerals, predominantly pyrite (FeS2), there is a risk of oxidation and formation of acid water containing heavy metals, known as Acid Rock Drainage (ARD). To prevent the process of oxidation, the tailings and waste rock have to be reclaimed. The most commonly used methods of reclamation are a coverage of water or soil. Mining also results in a large-scale interference in the landscape that will make an eternal change of its appearance.

Trycksättning och dimensionering av brandhiss för berganläggning

This thesis deals with the design of a combinated rescue-, personal-, and firefighting elevator for a nuclear waste storage facility to be constructed by the client SKB, Svensk Kärnbränslehantering AB. SKB:s mission is to dispose of all nuclear waste from all swedish nuclear power plants. The storage facility will be built in the rock 450 m under the surface and will consist of several kilometers of tunnel where capsules containing the nuclear waste will be placed. It will also hold a central area which contains spaces necessary for the operation and construction of the facility, such as elevator hall, storage hall etc. The facility will have two ways of access: a vehicle ramp and an elevator shaft.

Kemisk stabilisering av gruvavfall från Ljusnarsbergsfältet med mesakalk och avloppsslam

Mine waste from Ljusnarsbergsfältet in Kopparberg, Sweden, is considered to constitute a great risk for human health and the surrounding environment. Some of the waste rock consists of sulphide minerals. When sulphide minerals come into contact with dissolved oxygen and precipitation, oxidation may occur resulting in acid mine drainage (AMD) and the release of heavy metals. The purpose of this study has been to characterise the waste material and try to chemically stabilize the waste rock with a mixture of sewage sludge and calcium carbonate. The drawback of using organic matter is the risk that dissolved organic matter can act as a complexing agent for heavy metals and in this way increase their mobility.

Kvalitetsprocesser och mätning av pinnfräsar : ? Empirisk studie av produktionsmätutrustning vid frästillverkning

This master thesis investigates quality procedures and measuring of solid carbide end mills, with the main focus on measuring equipment. The thesis has been written in collaboration with a special production department for solid carbide end mills at Sandvik Coromant in Gimo. The department?s needs and constraints have been the foundation of the project and the main research question is: how to measure end mills in order to ensure good quality of the produced end mills. The project has contained both a theoretical study consisting of a literature review and practical studies in the workshop with the objective to identify an end mill?s main parameters and the relationship between an end mill?s geometry and the manufacturing processes.

<- Föregående sida 2 Nästa sida ->