The study has been done on behalf of and in cooperation with LRF Konsult. The purpose of the study was to try to find out how forest estate buyers valuated different parts of the estate at the time of the purchase and to see if it was possible to identify different trends between different kinds of purchasers. The study is delimited to Västerbotten County and all the purchases were made thru LRF Konsult. The background of the study is that the forest estate purchasers are paying more and more for the forest estates. The prices are often much higher than the net present value which means that they are paying for something more than just the timber value. The study is made with a questionnaire mailed to one hundred forest estate purchasers. Answers got returned from 48 of them.

The report describes a measuring method for analysis of energy consumption measurement in microwave ovens. Concurrently that the awareness of the environment evolves the demands are growing for more power saving products. This is also counting within the Home Appliance business, which is Whirlpools business area. Whirlpool is therefore interested of launching microwave ovens with documented low power consumption. To be able to implement this, both asserted measuring equipment, that fulfils all demands, and a standard procedure is required.

The aim of this master thesis is to measure library service quality in two groups of libraries, newly developed and well established, and to see if there are any differences in the users perception of the dimensions in LibQUAL+. The thesis also examines the different perception of quality for the user groups: undergraduate students, graduate students, and faculty. Another approach is to test the Swedish translation of LibQUAL+. Different theories on service quality are presented but the main theories are from the marketing perspective. The grounding and development of LibQUAL+ is described as well as the use of the instrument in different libraries.

This degree project has been performed with Mega Teknik AB in Landskrona. The project has resulted in a workplace for the cable installers of Mega Teknik. The workplace contains a workbench and a cart.The first stage in this project was to make an analysis of the current workplace to identify the needs the installers had.The different principle construction proposals of how the workbench would look like and which functions it would have was made during brainstorming, in groups and alone. These proposals were compared against each other using a functional analysis that has been put up to get the principle construction that fulfilled most points in this analysis.The proposal chose for further work was a cart and a bench with a module intends, the table got a formulation that creates a better reach for the installers.This proposal was generated in Catia V5 to get a better overview of the suggested proposal.During the primary structure phase drawings over all the products were made and the components were chosen. Calculations were made and the product got the dimension required.

In most software engineering project, users are only involved in the beginning of the project as a help to design the requirements specification but users can be involved after this phase too, but is it effective to do so? With this report we would like to investigate how effective it is to involve users after the requirements specification has been written and approved. To find out how effective it is to involve the users we try some fast and simple involvement techniques on a quite far gone project. These techniques include ethnographic studies, prototypes and surveys. We also interviewed a couple of people who work with usability and finally delivered a report with our results to them to find out if they found our result relevant. By also documenting how much time we spent involving users we will show to which degree user involvement is effective. We found out that a couple of fast techniques could get very much result in the form of usability enhancing suggestions to the developers.

Lack of political interest and will to deal with human rights violations carried out under the civil- military dictatorship, has characterized the transition and post-transition in Uruguay. The systematic use of torture, arbitrary imprisonments and forced disappearances in the relatively small country created a culture of fear that has been present through out the post-transition phase. Human rights groups have been central actors in the fight for truth and justice and against impunity. This study analyzes how these groups multiple democracy-building functions have contributed to democratic development. It also analyses how the democracy-building functions have been constrained by the political context.

Abstract During object-oriented system development, programming should be preceded by analysis and design to assure that the system fulfils the demands of the customer and simplify during the development phase and documentation. When modeling the analysis and design phases, several different notations may be used. One of these is the UML (Unified Modeling Language) which this thesis will cover. The aim is to compare the use of the UML i practice versus what is said in the literature. The investigation is built upon interviews at different companies to receive their reflections about the UML.

Insikten om vikten av att använda vetenskapligt beprövade bedömningsinstrument inom arbetsterapi ökar. Många instrument för bedömning av arbetsförmåga uppvisar en brist på vetenskapliga kvaliteter såsom validitet och reliabilitet. Detta medför ett behov av att vetenskapligt testa de instrument som idag används samt vid utvecklingen av nya instrument använda sig av systematisk vetenskaplig metodik. Syftet med denna studie var att utföra en initial prövning av innehållsvaliditet och användbarhet för bedömningsinstrumentet Assessment of Work Characteristics (AWC-1). Stipulativa definitioner av innehållsvaliditet och användbarhet användes för att avgränsa studien.

Traditionally, rolling mills use emulsions based on a mixture of oil and water for lubrication. Since two years ago SAPA has been using (instead of oil) a synthetic lubricant so called conditional emulsion for hot-rolling of aluminum. This lubricant is water based and homogenous at ambient temperature, but switches to a two-phase system at heating above the cloud point.This project aims to validate and if necessary modify an existing HPLC method for quantifying two out of three key components (A, B and C) in the conditional emulsion. Attempts to develop a method to quantify the pH adjusting components, X and Y were also made. These two methods are required to optimize the lubricant.Due to the complexity of the components, it has been difficult to present a method for quantification, and HPLC with ELS detection was chosen after a long series of trials.

In this bachelor thesis a complete prototype of an industrial vibration measurement platform has been developed. By measuring a number of variables such as acceleration, temperature and speed conclusions can be drawn on machinery health. The aim is to evaluate hardware and software solutions for a possible future product. Based on a requirement specification a proper hardware design has be developed. The hardware consists of a four-layer PCB with an ARM Cortex-M3 microcontroller and about 250 other components. The PCB was designed, assembled, tested and finally housed in a box.

The purpose of this graduate work is to seek knowledge about how children?s right to participation and influence is interpreted and understood in a specific context and also to examine how this right can be conditioned and shaped by the pedagogical practice of early childhood education.The focus of this study has been to examine the arguments and attitudes towards the right to participation and influence as a pedagogical practice as it is understood in early childhood education. Additionally, I have been interested in studying the affordances and restrictions that early childhood educators experience when dealing with children´s right to participation and influence.The platform used for data collection is Facebook and the informants recruited were active participants in forums regarding democracy in preschool education. In the second phase of the study I conducted online focus groups with these participants.For the analysis of the material I have adopted a poststructuralist perspective, starting from Jaques Derridas philosophical texts and use of deconstruction.The results show the complexity in early childhood education´s democratic mission. What becomes clear is the importance for the teachers to adopting an open, ethical and democratic approach in order to make children´s right to participation and genuine influence possible in the everyday reality of early childhood education. .

The organized and controlled form of collecting consumption taxes and toll from the import and export trade goes back to the 17th century in Sweden. The customs administration and procedure were regulated by royal announcements, and the majority of the documents found in the customs archives represent thus records stipulated by such notifications. The customs archives can be used for research on several levels; the announcements reflect currents within both the domestic and foreign politics, while the account lists for financial statistics portray the extent of the trade. The various lists of compilation can be further used to follow for instance the development of different units of measurement, the expansion of tax rates, the value of trade goods or the changes in monetary units or systems. The diaries, architectural plans of the customs offices and maps of the toll areas place the customs officials and their work within the local scenery.The thesis focuses on archives deriving from customs located at harbors and on the Swedish-Norwegian border in the county of Dalarna.

Hematology-instruments that analyze blood cells can at specific cases be followed by manual counting with a hemocytometer. The plastic hemocytometer which has a fixed coverslip and is assigned for disposable use, appears to reduce the problems arising from the use of the traditional glass hemocytometer, for instance coverslip-application difficulty and dust particles. Capillary whole blood sampling may be useful for patients at the emergency department and in addition, a smaller volume of blood is taken compared to venous blood sampling. This study will focus on the platelet- and leukocyte count (PLT and WBC) in venous and capillary blood, in order to compare the plastic- and glass hemocytometers with Sysmex XN-2000 (Sysmex Corporation, Kobe, Japan), and verify if capillary whole blood sampling can be used for the measurement of these hematological parameters. 30 subjects donated both capillary- and venous blood samples and these blood samples were analyzed with glass- and plastic hemocytometers with Sysmex XN-2000 as the reference method.

Due to the wide usage of different databases administrated by the Swedish government to keep control over its citizen?s the issue has arisen concerning if this information is subject for other purposes then originally acknowledged. Executives induced in recruitment for labour has over the years extended their need for information accumulated by these systems. Especially data from the criminal records registry are now being used as a normal step in the employment process among a vastly growing spectrum of enterprises and businesses all over the country. This thesis aims to illuminate the subject by grasp to what extent the described behaviour can be considered legally accepted according to the law or if these actions are inflicting with the foundational juridical principles that has to be ensured by the Swedish government due to our constitutional law.A strict jurisprudential method has been applied throughout the entire thesis to ensure the reliability of the results. The diversity of sources has gently been put together to assure the overall quality.

This master thesis has been carried out as a prototype development project. The project hasbeen performed in cooperation with ÅF Combra AB. The purpose with the master thesis is toconstruct a Bluetooth interface between an accelerometer and a smartphone and constructinga physical prototype containing an accelerometer. This is done to test a new user interface tomobile phones. The master thesis has also included a research about the possibility toimplement distance measuring with Bluetooth.