It has been demonstrated in this study how people working in frontline jobs in service organizations are exercising ?micro power?. The use of ?micro power? is defined as ?to in ones professional role, without objectively defensible reasons, impose sanctions on a customer?. The interviewees are explaining their use of ?micro power? with mood, working conditions, and customers? behavior.

Small pieces of plastic, termed ?micro plastic? in the oceans derive mainly from degradation of big plastics such as beach littering, but also from sources of direct emission from e.g. beauty scrubbers and synthetic sand-blasting. These micro plastics are ingested by marine animals ? mistaking them for plankton ? or via prey.

The purpose of this essay was to find out how leaders in micro service firms practice HRM and identify which HRM related problems they experience in their leadership. A case study consisting two cases was carried out. The study has shown that leaders in micro service firms use a highly personalised, informal management and involve their employees in the firm?s development. The findings were that leaders of micro service firms do not have any theoretical knowledge of HRM practises because of lack of education.

Micro-power wind energy convertors have recently increased in popularity. The reasons for this are among other things the increasing cost of electric energy and enviromental concern.In this thesis the connection of these micro-power wind energy convertors to the utility network is discussed. Electric standards for the connection of small production units is presented. Finally some calculations and measurements of electric quality are also presented. The utility network used in the calculations is part of Halmstad Energi och Miljö network..

Introduction: 1 November 2010  came the amendment about the audit requirement into force. The amendment concerned only micro-enterprises. The most common form offinancing for micro-enterprises are bank loans, therefore the banks play a major role in the business and wellness of micro-enterprises.Purpose: Purpose of this paper is to examine if the credit assessment has been affected by the removal of the audit requirement for micro-enterprises.Method: This study will be conducted by a qualitative study in the form of interviews. Five interviews were conducted, with four respondents from the large banks and    one respondent from Almi Företagspartner.Conclusion: All respondents agreed that the audit is seen as a mark of quality, some lenders will continue to request it from the micro-enterprise while other lenders look at other factors such as ownership, relationship or business concept..

The thesis is about exploring possibilities for developing a standardised system solution for micro businesses, this since most of the micro business lack proper system solutions, a contributing factor of this is price and also incompatibility between the solution and the business itself. The system solutions we will refer to are solutions which task is to cover the most important needs that a micro business might have on their system. The main goal with this research is to see if this is possible, and if so, how the developers should think to take it further. We chose to do this by identifying the most significant of needs a micro business has when it comes to this type of system solution.In this thesis we will present three needs which were evaluated and brought forth through the analyses of various interviews and observations we had done during the study. The interviews took place at respective company with their employees and consisted both closed and open questions with our main focus on the open questions because we wanted to obtain as much information from the respondents as possible from several viewpoints.

The master thesis ?Mechanical Integration of an IR-detector in a Micro Cooler? has beenperformed at FLIR Systems AB in Danderyd. FLIR Systems is a world leader in the design,manufacture and marketing of thermal imaging camera systems.The thesis project is divided into to two areas, Production Method and Noise.The Production Method concerns the positioning of a detector on the cold finger within the IRcamera.The detector has to be positiond with very high accuracy at the center of the cold finger,so it can be placed in line with the optical axis to avoid movement of the picture during zooming.The positioning of the detector is at present done with the help of specially designed guides on aplate on top of the cold finger. The design workes well but the special machining needed for thisplate is very expensive.The goal concerning the production method was to derive a new more cost effective method forthe assembling and positioning of the detector on the cold finger by replacing the guides on theplate with a reusable equipment or some other alignement operation.Several concept ideas have been generated with the help of concept generation methods in theform of concept classification trees and concept combinational tables. Two of these conceptswere selected to be further refined.

The world is currently facing a huge severe challenge in handling the issue of climate change. One of the ways to lower the green house gas emissions, which is seen as one of the main contributor to the climate crisis, is to use renewable technologies such as for example photovoltaic (PV) systems. PV-systems are also suitable for so called micro production, small scale energy production facilities, since it can be placed on practically any rooftop with the right solar conditions. In Sweden the usage of PV-systems has not yet gotten any wider spreading, even though the solar radiation conditions are very similar to countries that produce a lot of solar energy, as for example Germany. The aim of this paper is to describe non-adopter perceptions of PV-systems. The study holds a qualitative approach using deep interviews for data collection.

Den tekniska utvecklingen driver fram allt mer avancerade datorsystem. Samtidigt ställs allt större krav på stabilitet och flexibilitet i de operativsystem som ska användas på dessa system. De senaste årtiondena har micro kernel arkitekturen varit föremål för intensiv forskning och det finns idag ett flertal operativsystem på marknaden som använder denna arkitektur. Traditionella monolitiska operativsystem är relativt resurskrävande system som ofta anklagats för att sakna struktur. Micro kernel baserade system är en lösning på detta problem där man bantat ner kernel till så lite som ett tiotal kilobyte och flyttar ut tjänster som normalt ligger i kernel till user space.

Det huvudsakliga syftet med detta examensarbete har varit att utvärdera micro-Devalmetoden för att eventuellt fastställa ett kravvärde. I rapporten behandlas även hur LT-index och kornlängd förhåller sig till varandra samt om differentierade krav på Los Angeles-tal kan ställas beroende på olika axellaster. Examensarbetet har i huvudsak grundat sig på en litteraturstudie samt sammanställning av inkomna analysprotokoll via Banverket. Analysresultaten presenteras i form tabeller och diagram. Rapporten har mynnat ut i en slutsats där författarna anser att ett krav på kategori MDERB 7 är lämpligt.

ABB I-R Waterjet Systems combines the robotics and motion expertise of ABB Flexible Automation with high-pressure intensifier/pumping technology from Ingersoll-Rand to provide and continue to develop innovative waterjet cutting systems for global markets. The purpose of this assignment is to develop a process water purifier. The purifier should be applicable as an option to ABB I-R?s production cell Cutting-Box. At first hand the process water should be purified well enough to let out in the municipal sewage system, but the ultimate solution is purifying the process water to the range that recycling is possible.

Den tekniska utvecklingen driver fram allt mer avancerade datorsystem. Samtidigt ställs allt större krav på stabilitet och flexibilitet i de operativsystem som ska användas på dessa system. De senaste årtiondena har micro kernel arkitekturen varit föremål för intensiv forskning och det finns idag ett flertal operativsystem på marknaden som använder denna arkitektur. Traditionella monolitiska operativsystem är relativt resurskrävande system som ofta anklagats för att sakna struktur. Micro kernel baserade system är en lösning på detta problem där man bantat ner kernel till så lite som ett tiotal kilobyte och flyttar ut tjänster som normalt ligger i kernel till user space. Solaris och Linux bygger på en utveckling av monolitisk kernel där man byggt operativsystemet i ett antal sinsemellan beroende lager vilket bidrar till ökad struktur i systemet. Flexibilitet uppnås i dessa system genom att man lägger till funktionalitet för att under exekvering länka in ny kod i kernel. Windows NT och Mac OS X är baserade på micro kernel arkitektur.

ABB I-R Waterjet Systems combines the robotics and motion expertise of ABB Flexible Automation with high-pressure intensifier/pumping technology from Ingersoll-Rand to provide and continue to develop innovative waterjet cutting systems for global markets. The purpose of this assignment is to develop a process water purifier. The purifier should be applicable as an option to ABB I-R?s production cell Cutting-Box. At first hand the process water should be purified well enough to let out in the municipal sewage system, but the ultimate solution is purifying the process water to the range that recycling is possible. When investigating the different principle of purifying water, a research of different products and their manufactories was done. These different products were compared and the principle of filtration was the most applicable, as most of the products were designed for far larger applications. As the process water contains quite large amount of particles, it is necessary to perform the filtration in different steps. The process water purifier is therefore composed of a module of coarse filtration and one of micro filtration. In the module of coarse filtration the mainly amount of fibres and particles are eliminated. They are kept back in the container unit with the larger fragments and dumped with these when the container is emptied. In the module of micro filtration the filtration is performed in two steps. In the first step particles larger than 50?m are eliminated, in the second step the micro filter is setting the range of purifying, in this case 10?m.

The aim of this study was to explore how six men who run a micro-enterprisewith a maximum of 10 employees handle the balance between work and otherlife. Qualitative approach with semi-structured interviews was conducted and thesample consisted of six men with micro-enterprises of varying ages. The themesused in the interviews were boundless work, roles, boundaries strategies anddemand / control - social support. The results showed that micro- entrepreneursdo not experience any major imbalance between work and other life. The studyrevealed that the division of roles in the home of the elderly respondents was ofthe classical gender character that woman took great responsibility in the home.Among the younger respondents the unpaid work at home was equal divided.Social support was perceived highly by all respondents, and they alsoexperienced a high level of control over the requirements of the job.

SMC is in the process of developing a micro simulation model. The existing micro simulation model developed at Cornell University for US data, CorSim, is one of the fundamental parts for the new micro simulation at SMC. To develop the Swedish model, Swedish data on all individuals in Sweden during 11 years are also available. These data are organized in a database. This paper describes the process of rebuilding the database to a more useful structure.