This thesis is about developing a design that provides improved vacuum seal between a lead coating and a plastic coating during plastic extrusion processes of cables. This report is a part of the course MSGC 17 for Bachelor Engineers in mechanical engineering.The work is performed at Nexans Norway AS in Halden where they have a production of high voltage cables for sea-, and offshore industry. A problem they face is that they do not get enough good seal at the attachment to the plastic extrusion machine. They want to achieve a vacuum between a lead coating on the cable and a plastic coating of the cable for plastic extrusion, which is something they do not achieve today. The thesis is thus to come up with a design that provides better sealing against the cable.The work involves a construction part with the phases of product development processes.

Silage is today a common feed for different animals. A general way of storing silage is in bunker silos covered with polyethylene film. The covering and uncovering is labour intensive and it is often difficult to get the silo properly sealed. Because of these reasons many American farmers leave their silos uncovered and accept the losses accompanied. One purpose of this study was therefore to examine if it sometimes can be justified to leave bunker silos uncovered.

A baggy paper web has parts that are longer than neighboring parts. One of the assumed reasons for bagginess is thickness variations of the paper. In the roll the thicker streaks then add up to form a ridge. In the ridges the paper is strained and during storage the strain may become permanent. When the paper unreeled it is then baggy.

Background: In small animal healthcare fluid therapy is an important area. To get an adequate treatment there are several factors that may play important roles in this matter. One of these factors is the correct use of the administration technique. Aim: The aim was to investigate how correct the amount of prescribed fluid was given when different people set up a fluid administration set. Method: An experimental study was performed to compare two different infusion techniques.

Radio frequency identification (RFID) is a versatile wireless technology usedworldwide. The fields of applications are many and its popularity constantlygrows due to smaller in size, better and less expensive components. RFID isused to identify, track or share information about an object using radio waves.This master thesis describes the process of designing and implementing ahandheld UHF RFID reader. The goal was to, based on a UHF RFID-chipdesign a fully functional, small in size and power efficient device. Amicrocontroller provides the user interface and is also used to control theRFID-chip and a Bluetooth device.

The purpose of this thesis work is to evaluate how the physical behaviour of a pipe bend is affected by the pipe bending procedure. Effects such as initial ovalization, thinning, thickening and plastic hardening from the bending procedure are examined and the mechanical properties of pipe bends containing these effects are investigated.This has been evaluated by creating a detailed Finite Element model of a pipe that is being bent. Then the differences compared to a bent tube in a virgin state, so called Elbow elements and an analytical in-house program have been evaluated. The virgin state refers to a model of a pipe that is bent from the beginning, thus having a homogeneous thickness and not containing any plastic hardening. The Elbow element is a calculationally cheap element, specially developed for accurate calculations of pipe bends in an initially virgin state.The goal with the thesis work is to get a better picture of what happens to a pipe as it is being bent, how this affects the mechanical properties and to evaluate the possibility to develop an easy method for taking these effects into account when using the Elbow element.This report describes the layout of the work and how the detailed FE-model has been constructed.

Background: Corporate Social Responsibility (CSR) is a term that has become increasingly prominent in the corporate world. As the awareness of responsibly produced products is growing among both companies and consumers, it has become increasingly important for companies to get involved in sustainability issues. There may be several reasons why companies choose to integrate CSR in their business, where one reason may be related to company size. In the business category of micro, there is currently no widespread research, which makes this company size interesting to study. The choice of industry was made because coffee is one of the world's most important merchandise, and the coffee industry has come a long way with integrating CSR in comparision to many other industries.Purpose and research question: The purpose of this study is to create a deeper understanding of why coffee roasters in the business category of micro enterprises choose to incorporate CSR in their businesses.

The purpose of this thesis was to highlight how different aspects of market communication are used when micro companies choose to use both Internet and store selling activities towards the consumer market. The thesis dealt with off-line and on-line communication considerations with focus on advertising, interactions, and relations. In order to achieve this purpose a case study was conducted, that revealed that the companies acted according to theories. The conclusions drawn from the thesis were that companies tended to rely on traditional ways of dealing with advertising and interaction. We could also see that relations were created as a result of unconscious behavior and that the Internet activities still were on a basic level..

By examine plastic craniums from eight different hominids I wanted to find morfological characteristics that agreed with those of modern humans. The species that were selected had a plastic casting of its cranium in the laboratory at Gotland University. My focus was on species from the family Australopithecius and Homo and only working with their craniums. And this because the cranium and the theeth shows the most visible morfological characteristics between the different hominids. I also wanted,in a small part of the essay, to write about the differences in now living primates and humans skulls.Except from analysing the plastic castings I also studied surveys written by other scientist on the same subject.

This paper intends to show how micro- and small businesses in the tourism and experience industry makes use of social media as a marketing tool. The study also shows the possibilities for businesses to market themselves to customers through social media. Small businesses usually don?t have the same conditions or the same marketing resources that larger companies have. For small businesses that lack marketing resources, social media is a great addition to marketing since the technology around social media is relatively simple.

The purpose of this thesis work is to evaluate how the physical behaviour of a pipe bend is affected by the pipe bending procedure. Effects such as initial ovalization, thinning, thickening and plastic hardening from the bending procedure are examined and the mechanical properties of pipe bends containing these effects are investigated.This has been evaluated by creating a detailed Finite Element model of a pipe that is being bent. Then the differences compared to a bent tube in a virgin state, so called Elbow elements and an analytical in-house program have been evaluated. The virgin state refers to a model of a pipe that is bent from the beginning, thus having a homogeneous thickness and not containing any plastic hardening. The Elbow element is a calculationally cheap element, specially developed for accurate calculations of pipe bends in an initially virgin state.The goal with the thesis work is to get a better picture of what happens to a pipe as it is being bent, how this affects the mechanical properties and to evaluate the possibility to develop an easy method for taking these effects into account when using the Elbow element.This report describes the layout of the work and how the detailed FE-model has been constructed.

Advertisers of today are facing a great challenge in a landscape where it becomes even more difficult to break through the clutter and convince consumers to buy their products. In order to succeed, they need to come up with new ways of communicating with their customers. The purpose of this paper is to investigate if micro-blogging could be considered an effective media choice in order to enhance the perception of brand associations and traditional communication effects. The subject is of interest as brands are putting increasingly more resources into this communication channel. However, at the current date the marketing effects of micro-blogging is unexplored in academic research.

The aim of our study is to explore the empowerment process among micro-business owners in Kayamandi, a black township of Stellenbosch in South Africa. What are the positive and negative implications for the empowerment process? Another aim is to find out the role of local and international support in this process. The theoretical framework of this study revolves around the concepts of gender, power and empowerment. Our methods are qualitative interviews and observations.

Lower energy use in buildings is a result of increasingly stringent energy requirements across Europe. When conventional district heating technology is used in areas with low energy consumption heatlosses do not fall even though the amount of energy delivered is reduced. This reduces income for thedistrict heating company. To maintain their economic viability the district heating companies? majorchallenge is to implement new solutions that minimize heat loss.

This study will chart the changeover work, with a standpoint in the SMED-theory, at the company Peter Ernst AB in Värnamo. They are suppliers in plastic moulding industry and delivers to amongst other Saab in Trollhättan and Scania. The company are in a very competitive market, and they have to make manufacturing more efficient and rationalise their costs to be able to compete. A big problem, which the company has identified, is their long changeovers. It brings higher costs, a more stressful work climate and holds back the company from becoming more efficient.Field studies will be conducted on the changeover, which will be observed and filmed.