Researchers at Karlstad University have developed a method for making paper ion conducting. The reasearchers want to test this technique in various applications and produce products that make use of the ion-conducting paper. Hopefully this will drive the development forward and result in new applications for the ion-conducting paper.This study was to test the possibility of manufacturing a gas sensor of conducting paper along with electrodes of conductive polymers printed on the paper. By comparing the paper sensor with an electrochemical cell in which the electrodes of conductive polymer replaces electrodes of metal and ion-conductive paper replaces the liquid electrolyte in the electrochemical cell, it was hoped that it would be possible to measure the oxidation and reduction reactions that a gas could introduce at the electrodes.It was shown that it is possible to measure a potential difference in the range of 0.3 V to 0.5 V between the electrodes when exposing an electrode to 100% oxygen. The reaction that takes place is relatively slow and the reaction rate is partly due to the distance between the electrodes.Since the sensor can measure oxidation and reduction reactions it is possible that, in further development of a sensor, the sensor can be made ??into a versatile sensor with more applications than gas measurement as there are many more ways to oxidize or reduce the electrodes than by exposure to oxygen.During the study there have been discussions and meetings held with various companies in the sensor industry to be able to specify what the market demands of a sensor made ??of paper and the requirements that must be placed on the sensor for it to be interesting for the companies..

Tankevärldar och förhållningssätt i särskolans musikverksamhet av Liselott Stenman, är en studie inom ramen för Magisterprogrammet i musikpedagogik med profil musikterapi vid Kungl. Musikhögskolan i Stockholm.Bakgrunden till denna studie står att finna i min tidigare erfarenhet som musiklärare på en särskola med skolverksamhet för barn och ungdomar med diagnostiserad utvecklingsstörning samt funktionshinder. För några år sedan gav en elevsituation upphov till frågor kring förhållningssätt hos personalen på denna skola, vilket väckte mitt intresse för fenomenet förhållningssätt. Denna studie söker därför svar på hur fem informanter med olika anknytning till särskolans musikverksamhet tänker kring fenomenet förhållningssätt. Syftet är att belysa frågan på ett individuellt plan för att erhålla fördjupad kunskap om tankar runt förhållningssätt inom denna verksamhet.

There are many old dams in Sweden and, since few dams are constructed today, the main task in risk assessment on the existing dams is often to reduce the risk of failure. RIDAS (Swedish Guidelines on Dam Safety) is used when designing new dams and assess the existing ones. The guidelines include stability requirements for different failure modes, e.g. overturning and sliding, which imply that the load effect from e.g. uplift and ice load need to be less than the resisting loads or moments.

This thesis aims to investigate if peer-groups based on industry classification perform as well as, or better than, peer-groups based on other measures that represent factors affecting the price-to-earnings multiple. In contrast with previous empirical studies, a solid theoretical approach is used in defining which factors, according to valuation theory, affect the P/E-ratio. The factors identified as explanatory are accounting measures, risk and growth. Furthermore, we have recognized several measures that represent these factors. These measures are tested for accuracy of prediction in terms of the P/E-ratio for peer-groups based on these measures relative to an industry classified peer-group.

Interest in the implementation of AGV-systems (Automated Guided Vehicle) has in recent decades increased. The reason is that it allows companies to perform reliably and secure internal transport while reducing the need of personnel. It is one of todays most advanced and complex material handling system that can independently make their own decisions regarding flow paths and traffic control. An AGV-system consists of transport units carrying cargo from point A to point B, and communicates using a computer.The purpose of this study is to develop a model on how to proceed in order to design an AGV system in heavy industry. The model is tested by a case study of a company in the metal industry to determine if the model works and gives the correct result.

This thesis has been carried out to the Technology Group at industrial plant Tube Mill2012, which belongs to the Sandvik AB. Technology Group is a unit that takes care ofall requirements and suggestions regarding investigations, test runs and designmodifications. The main objective is to identify and analyze the existing initializationprocess to see where improvement opportunities exist and to come up withsuggestions for improvement, supported by previous research and literature. Anextensive literature search and case study has been conducted to provide a solidfoundation to refer to during the work. Completing the interviews and the workshopgave a clear picture of their unstructured work and approach, how the lowrequirements on the received orders caused problems for the group as well as thelack of a standardized resource allocation method provides major delay factors.Solution proposal then became a very easy process model in five steps with all theinformation gathered in one place.

The aim of this study was to examine the current and historic mercury(Hg) load of the lake Storjuktan due to its recent exposure to a local potential source of Hg in form of the Sulphide mine Blaikengruvan(2006) and an earlier potential sources of Hg-load, the damming of the lake(1960s). Sediments were extracted using a HTH-sampler, freeze-dried, and analyzed for tot-Hg, LOI and activity of 210Pb and compared to samples extracted prior to the opening of the mine(2006). Constant initial concentration (CIC)-dating model was used for dating the samples. Low levels of Hg (100ng/g) were found throughout the lakes sediment. The highest levels of Hg(220ng/g) was detected at a depth of 4-5cm dating back to the mid 1970:s, suggesting that increased levels of atmospheric Hg rather than damming of the lake has caused the increase of Hg.

The purpose of this master?s thesis is to study an electronic reference service from a user perspective. By qualitative interviews with eight students the thesis examines their information behaviour, why and when they use the service, the user?s experiences of the service and the communication with the librarian. The users have all used the Swedish electronic reference service Fråga biblioteket ? Forskningsbibliotek.

For several years Uppsala University together with several companies has been involved in a WISENET project aimed at improving railway transport security. By placing a sensor system near the wheels of each wagon, the temperature of the bearings can be measured and transmitted to a collector placed centrally on the wagon. This in turn transmits the collected data to RFID receivers placed intermittently along the railway.As the signals are transmitted wirelessly, problems may occur as the antennas get dirty or coated with ice and snow. To determine the effects of these coatings, several tests were performed examining the reflection coefficient S11, the impedance Z11 and the efficiency eta of an antenna, and how they varied when various coatings were placed over the antenna. Examined coatings were ice, snow and water to determine the effects of weather, and various metal-based coatings: powdered iron both pure and partially oxidized, and iron ore granules.

During my final examination project, I have been working with a design process to develop a new set of candle lanterns for the company Sagaform AB. This company has a large and significant role on the Swedish interior design and retail market. The assignment was developed when the company stated that they would like to supplement and expand its existing range of products. The research and surveys I have done have helped me to create eight different concepts and one of them ready to compete with the existing candle lanterns on the market. The result of my concept proposal expected to be included in Sagaform?s 2013 spring catalogue. During the project I have developed 3D-rendered images, a physical model, and a solid foundation for making prototypes. The Balloon has an attractive design language that fits both every day and more festive events.

AbstractThe aim of this qualitative study was to investigate how parents of children diagnosed with Autism, Aspergers Syndrome or ADHD/ADD describe their experience of the Swedish welfare support system in written biographies. To answer this question a study of five biographies written by parents with children diagnosed with ADHD, Autism and Asperger Syndrome where made. The conclusion was that the social network itself is of great importance to the parents. Families with single parents experienced a less positive experience of the Swedish welfare support system than parents with a spouse. The study also reveiled that families with a supporting social network and a solid financial ground in combination had the best experience of the Swedish social welfare support system.

AbstractThe dependency of fossil fuels in the transport sector causes large emissions of carbondioxide. This problem can we reduce by using vehicle gas from digested solid manure and leftover of pasture. I have studied the potential for this in the county of Västernorrland. Thepurpose is to investigate how much vehicle gas that can be extracted.One central, large scale digestion and upgrade plant should be placed in Härnösand. Theamount of pasture and manure that is economical and practical available is enough to produce2,7-3,5 millions Nm3 vehicle gas.

There are several objects of age whose provenance and history has disappeared with time. The purpose of this thesis is to find out which analyzing methods that gives results and how the different methods can be combined and /or established in each other. The investigations centers around an embroidery, belonging to Tämta church, with unknown origin, use and age. The embroidery is long and narrow with applications in the form of dragons and eagles on a ground of velvet cloth. The dragons and eagles are covered with metal threads.

This report is the result of a thesis as been implemented during the spring term 2009 atthe University of Gävle.The company Bruks produces mobile chippers which are used for chipping loggingslash, roundwood and parts of trees. The chipper is powered by a separate diesel engineand the chipper can be assembled on trucks, trailers or some other carrier vehicles.When the chip has passed the chipper drum, the chip is collected in an integrated binwhich is mounted on the vehicles frame with dumping yokes. When these dumpingyokes were designed they were probably created with large material dimensions. Theaim with the degree project is hence to study the strengths of materials and, if possible,to suggest an arrangement that can decrease the total weight on the dumping yoke onBruks´ mobile chippers 805 CT.The CAD-program Pro/ENGINEER was used during the project for outlining the 2Ddrawings,as distributed of constructors on Bruks, to solid 3D-parts. The three-dimensionalassembly from Pro/ENGINEER was transferred to Pro/MECHANICA.

This paper has bearing on the subject of foreign policy analysis and decision-making,but is nonetheless important to peace and conflict studies due to its emphasis onnuclear weapons and deterrence.I have constructed a theoretical framework for the analysis of foreign policydecision-making that I set out to test on a crucial case. The framework iscrosscutting, and takes into consideration four levels of analysis: the system-,regional-, state-, and individual level. It is centred on a key decision maker, andapplies a cognitive approach for determining his or hers belief system through whichthe inputs from the other levels are filtered in order for the decision maker toconstruct a perception of reality, from which the decision is then formulated within.The framework is applied to North Korean and its leader Kim Jong Il. It sets outto explain his behaviour in the matter of their claimed nuclear weapons program, andhis decision to conduct a nuclear weapons-test, getting inside his head trying to figureout why he chose to do it and for what reasons.The conclusion indicates that the basic structure of the framework and its generalapplicability is sound, but that it needs further testing in order to make it perfectly solid..