How do we match our education with the needs of the construction line of business and the requirementsof the Swedish National Agency for education? Is there something that we have to change?In this study I have asked our former students about their opinion of our education and I have also asked them to give me their view on what a good teacher is like. I have been able to benefit a lot from their answers in my efforts to be that good teacher. This survey took place at Facebook.The answers showed that we carry on a piece of solid workmanship. But you can always improve, try harder.

The thesis is an examination of the methods that are appropriate and long-term choice to obtain clamping force and secure screw joints in production. The employer, Scania CV AB, transmission manufactures axle gears to all trucks produced in Södertälje. One of the most common assembly elements is screw joints, where the clamping force is essential to achieve a secure joint. Current methods to secure the joint is due much of the friction effect and is an indirect method to measure the clamping force. The clampforce accuracy becomes more widely with torque angle control.

For several years Uppsala University together with several companies has been involved in a WISENET project aimed at improving railway transport security. By placing a sensor system near the wheels of each wagon, the temperature of the bearings can be measured and transmitted to a collector placed centrally on the wagon. This in turn transmits the collected data to RFID receivers placed intermittently along the railway.As the signals are transmitted wirelessly, problems may occur as the antennas get dirty or coated with ice and snow. To determine the effects of these coatings, several tests were performed examining the reflection coefficient S11, the impedance Z11 and the efficiency eta of an antenna, and how they varied when various coatings were placed over the antenna. Examined coatings were ice, snow and water to determine the effects of weather, and various metal-based coatings: powdered iron both pure and partially oxidized, and iron ore granules.

The situation that one can discern on the Swedish real estate market is that while there are several offices vacant, the need for apartments is high ? the vacancy rate for apartments is non-existent. According to the rebuilding of Skatteskrapan one will realise that the project requires a lot of money, even though it promotes the residential situation. The real estate owner experiences a risk in rebuilding real estates ? whether it will generate good yield or not.

SammanfattningDenna rapport syftar till att redovisa kandidatarbetet för spåret industriell design, där målet var att utforma en mobil läslampa med lysdiodsteknik. Målgruppen för läslampan var främst studenter och resande som kan tänkas vara i behov av att läsa på platser med lite eller otillräckligt ljus. Arbetets fokus har varit att utforma ett fullständigt koncept med integrerade lösningar för strömförsörjning, kylning och en behaglig ljusmiljö.Det största problemområdet var att utforma en tunn armatur som samtidigt fungerade som en värmeledande kylfläns. För att lösa detta utfördes först beräkningar analytiskt och sedan numeriskt med hjälp av datorprogrammet ANSYS och redovisas som en separat del i rapporten. En tredimensionell modell utformades i Solid Edge och renderingar av slutkonceptet utfördes i KeyShot.Resultatet av arbetet blev en länkarmsbaserad hopfällbar läslampa i kompakt format.

Civil disobedience constitutes an interesting ethical phenomena in the democraticstate since the people performing it consciously brakes laws and norms in societyfor purposes they themselves judge to be morally good and just. This thesisexamines whether the phenomena of civil disobedience is justifiable in ademocratic society.In this study civil disobedience is analyzed on two levels. First the problem isanalyzed on a theoretical level in relative to the three, by us established, values:respect for the law, the will of the majority and equality. Second, civildisobedience is analyzed on a more practical level where we test our theoreticalline of argument with the help of two example groups who engages in civildisobedience. The justification of civil disobedience is also analyzed through twoethical perspectives on acting, deontology and consequentialism.Our conclusion is that civil disobedience is justifiable on a theoretical level inrelative to the values we discuss.

The situation that one can discern on the Swedish real estate market is that while there are several offices vacant, the need for apartments is high ? the vacancy rate for apartments is non-existent. According to the rebuilding of Skatteskrapan one will realise that the project requires a lot of money, even though it promotes the residential situation. The real estate owner experiences a risk in rebuilding real estates ? whether it will generate good yield or not.

This essay is dealing with the question of the possibility for a non archaeologist to learn something about the Scandinavian Bronze Age by reading novels taking place in the specific period. I have studied novels written by Scandinavian writers between 1980 and present. Before I started I constructed nine different categories that I was to look for in the novels. The categories were constructed in the aim to get as a complete picture as possible of the Bronze Age society. The results were then compared to archaeological evident and theories and discussed in terms of this connection.

Lättelement located in Örnskoldsvik AB is one of Sweden's leading companies in the development of building elements in the form of roofs, walls and floors made ??out of light beams. The company has clients from Lund to Kiruna, and from Norway. This means that the elements have high standards when they have to take many different loads from wind and snow due to such wide geographic variation.The roof elements are structured so that the main body is made of light beams with an I?profile.

In the last few years the environment becomes more watchful, even for us farmers. All agricultural enterprises that exceed 200 animal units must be tested according to regulation of environment. A farm business with 200 animal units and more is classed ?environmentally hazardous activities? and has to make an environmental impact assessment for the business you have today, and the activity after expansion. Before you can construct a building and expand the numbers of animals is a lot of applications to make. I have in this project restricted me to establish a environmental impact assessment and a consultation foundation. To make a environmental impact assessment is the big part of the application. The environmental impact assessment take a lot of time and you need skills for all the rules in the environmental code to be abele to make an environmental impact assessment approved. The environment codes purposes (1 kap 1 § Miljöbalken) is to rule the laws. The purpose of the environment code is to promote sustainable development which will assure a healthy and sound environment for present and future generations. Definitions of a ?environmentally hazardous activities? 9 kap 1§ Miljöbalken) shall mean the discharges of wastewater, solid matter or gas from land, buildings or structures onto land or into water areas or ground water.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.

With a growing population on earth the amount of end-of-life vehicles (ELVs) and other scrap steel increases. The European Directive 2000/53/CE? requires a minimum of 95 % reuse and recovery and 85 % re-use and recycling no later than 1 January 2015, for end-of life vehicles. This imposes a need for more efficient recycling and recovery. Despite this shredder residue (SR) is commonly land filled.This report investigated the magnetic fines residue generated at Stena Metall shredder facility in Halmstad, Sweden.

The aim of our thesis is to study and analyze the components and features a brand should have to provide a solid foundation for brand building. Furthermore, we show how brands can make use of trends in a brand establishment.This paper is written from a qualitative approach. Through both structured and semi structured interviews, we obtained valuable information from our respondents. Our frame of reference and empirical foundation are linked together through an abductive approach which has resulted in our analysis and conclusions.A trend brings with a set of emotional characteristics, which companies can?t influence but must adapt to.

The shooting sport is one of the most widespread sports in the world and it isbeing practice in most countries. Based on their own experiences, in competition -and hobby shooting, the client M4Solutions found a demand and need for ashooting target that is manufactured in Sweden.The purpose of the project has been to develop, with the help of Marcus Walldén,two shooting targets from idea to finished product. These two shooting targets,Plate Rack Target and Dueling Tree, would each be equipped with a mechanicalresetting system but will in the future have the ability to be provided with anelectronic resetting system.The project from the client was divided into two theses. One of these two, writtenby Marcus Walldén, focused on the tripod parts and the overall design work forboth Plate Rack Target and Dueling Tree. The thesis that is presented in thisreport have focused on resetting systems, the design of protective plates and otherperipherals for both shooting targets.This work has primarily been in CAD environment where design, constructionand development has been given free rein.

This thesis has been carried out within the bachelor program for mechanical engineering at Karlstad University in collaboration with BAE Systems in Karlskoga. The purpose with this work was to design a mechanism and associated parts for loading and unloading of shots between primary and secondary magazine in BAE's new 40mm's ship gun.Parts designed or redesigned among other things a transfer mechanism for shot at loading and unloading, well as a hatch mechanism which makes the shots do not fall out of the primary magazine when making separate use. Various important details have been designed to maintain a good functionality of the mechanism.The construction work has mainly been carried out in the CAD software Solid Edge and its associated FEM module. The construction work has also been carried out on rough calculations for constructed details in order to ensure that they meet the stringent requirements of military use in tough marine environment. Two of the most critical parts of the structure where analyzed with the FEM module for estimating the stresses in the material at the applied load.The final design, which is a result of the thesis, meets the requirement specification and the set targets.