The construction process which is used today while constructing residential buildings has for along time remained unchanged. Unfortunately the development process has gone away frombecoming industrialized and instead most of the work is done at the construction site. In thisrespect this is a worse alternative because the project outcome will be more expensive and theconstruction time will be longer. Skanska?s vision is to have a process which is more like the oneused in small residential buildings which is fully industrialized.The constructing process for residential building involves more parties and therefore it becomesmore complicated.

This paper deals with village history around millstone quarry Eastern Utsjö in Malung, Sweden, in the hope of finding deposits that could date the quarry, in that the quarry in the current situation is dated only by the millstone fragments outside the resort. My purpose was to conduct a discussion on the quarry alone can be dated by deposits outside the resort. I have used FMIS RAÄ:s fornsök and a lot of literature to identify village history. The results showed that it is not possible to date the millstone quarry from village history, but through deposits outside the resort of Malung, which have been found around Mälardalen, Sweden through archaeological excavations, and derived from the millstone quarry Eastern Utsjö, can put an age on the quarry..

In forestry there are always needs of forest data to make good strategic decisions of different actions and economic winning. Usually this data gets from field-estimations made by forest workers with expensive costs and sometimes unsatisfied quality. StoraEnso Skog is a great forest company in Sweden and they have part of the responsibility of the forest own by Bergvik Skog. Bergvik Skog is owner of 1, 9 million hectares productive forest land. Both Bergvik and StoraEnso have great interest in new inventory techniques to get the important forest data. The company Foran Remote Sensing offers the opportunity with airborne laserscanning of forest and forest land. Foran got the mission of Bergvik and StoraEnso to laser scan Bergviks possession in Älvdalen, Dalarna.

The study aims to reduce energy consumption in apartment buildings where individual metering and charging of heat is applied. The aim is to develop planning and design for individual metering and charging in apartment buildings.The study is based on literature review, interviews and case study that include analysis of existing documents. Interviews were carried out with the property developer and the involved consultants who planned the apartment building Yasuragi. To investigate the differences the condominium association has noted in heat consumption between flats, the debit values of the heat were used to discern which houses that were furthest from the average consumption. On these flats there were temperature measurements and thermal photo shoots made for discriminating behavior and possible construction techniques which could be the explanation for the heat spread.Boverket shows that the consumption of heat can be reduced by 10-20% after insertion of individual metering and charging in an apartment block.

The latest thing in the area of environmental building today is energy-plus-house. The idea behind the energy-plus-house is to create a house that produces more energy than it consumes. To accomplish this, the house uses renewable energy, in this particular case solar energy. With the help from a proper construction and thoughtfully projected installations you can achieve a surplus of energy. The surplus energy can then be sold to the surrounding buildings and thereby conduce to a financial profit for the household.

The following article consists of two parts; one part is about house construction and the other is a specialization about radon. The house construction part describes how to project a house from start. It contains the conformation of the house, the installations needed, calculations considering the strength of the construction, energy calculation and what materials were chosen. Calculations considering the costs of building and operate the house has been carried out. The result showed that the house would cost approximately two million Swedish kroner to build and thirteen thousand kronor a year to operate.

The purpose of this study is to compare the contents, editorials and front covers of Sweden?s oldest girl?s magazine Veckorevyn during two different years, in which the magazine had two very different chief editors.In the year 2000, Emma Hamberg got the job as editor-in-chief for Veckorevyn, with a vision of changing the way the magazine represented young females. She wanted to add a more feminist viewpoint to the magazine, since she felt that Veckorevyn didn?t live up to its claim of being ?a girl?s best friend?. Six years later, the famous Swedish fashion editor Ebba von Sydow became editor-in-chief for Veckorevyn, with the intention of making the magazine better, smarter and more fun for young girls.

A growing number of cities and municipalities in Sweden begin to work with city models in 3D. For the most part the models are used for visualizations of ongoing planning processes, but also for the analysis of noise, shadow studies and environmental disaster simulations.Gothenburg continues to develop the use of 3D maps in municipal operations and is demanding a way to create building elements (walls), which generates in 3D buildings, from roof constructions that are mapped from the primary map. A method has been investigated in the present study. The results are then presented as a 3D model of buildings, along with a terrain map that will facilitate the localization of the area. The created 3D buildings are then compared with roof-data from the primary map to see how well they harmonize with each other.

The main purpose of this thesis is to examine how the European Union through the Directorate- General (DG) of Education and Culture, are calling forth a constructed sense of European identity amongst the citizens of the Union.It is a discourse analysis, which can be described in twofold. Firstly, it is a mapping of the European discourse; i.e. how the European Union defines the identity it seeks to mobilise. Secondly, it examines whether or not there are similarities in the European discourse of identity and the traditional nation-building discourse of national identity.According to this thesis a European identity is articulated in cultural terms, whereby its members are said to share the same values and a common cultural heritage.To bring the people of Europe closer together and to deepen awareness of their "common" history, the European Union encourages all manner of meetings and exchange schemes between Europeans. Although its goal is to develop a feeling of belonging to a shared culture, the EU is also keen to preserve the specific aspects of Europe's many cultures.

Sweden has a great tradition of pattern in both wallpapers and fabric, where colours and shape matters a lot for the customer. I have through my examination project tried to expand the views and find new alternatives and shapes for the obvious pattern traditions. I have therefore worked with what could be on the verge of attractive or repelling. To create a curiosity of what is considered to be commercial. From the prospective of the body organs I have created physical patterns for fabric and wallpapers.

Abstract This degree project examines how much carbon dioxide that emits during the construction phase of a road project. This is to make it possible to compare how the amount of carbon dioxide differentiates between traditional road construction and Swepave construction, which is PEAB?s alternative way to design roads. To make the comparison a calculation tool has been produced. To compare the amount of carbon dioxide emissions a reference project was needed.

This thesis has been carried out at the Building and Civil Engineering Programme at Chalmers University of Technology in cooperation with NCC Technology. The study aims to investigate the optimal design of a library of standardized structural solutions for in-house multi-family buildings and what benefits it brings. Today NCC use technology platforms to improve efficiency and simplify the construction process. The platforms provide the constructors guidelines on how construction details should look like, but the details are not complete. NCC Technology started in the spring of 2013 a project to investigate what benefits there are to create a library of standardized structural solutions for the constructors, with more detailed solutions than in the platforms.

In this study I have examined how narrative techniques can be used to promote the reading value and readability in information. My focus has been on the communication-agency Mandoly?s information-brochure which function is to inform other companies about their own potential for development in collaboration with Mandoly. The purpose with this study is to examine how it is possible to increase the reading value in order to engage the target group. In my study I have used four methods: analysis of Mandoly?s old information-brochure, literature studies, a qualitative interview, and an user test.

Enköping?s Rugby Club has long lacked a bigger hall to gather their members in, where they can meet and socializes outside trainings and games. Thanks to Enköping?s municipality, The Swedish Inheritance Fund, Swedish Sports Confederation, sponsors and club members the clubhouse will be built out with additional 100 square meters.The project is planned in two phases of which phase one is the buildup of the new clubhouse and phase two is the renovation of the existing part. Phase one started with the first groundbreaking in December 2006 and was finished for the season 2007.

Purpose There are almost infinite numbers of ways to build dairy farms in Sweden. When building a new free stall barn you have the possibility to affect both working environment and animal welfare for many years to come. The construction costs are influenced by which type of barn that is built and what functions it contains, for example one can predict that automatic milking systems are more expensive to integrate than milking parlours. But what is the real cost of today for the construction of free stall barns with milking centres and how is it affected by construction methods and functions? Is the labour time influenced by the building costs? These are some of the questions this report will try to answer.