When traffic in large cities increases, it becomes more vulnerable to disturbances such as accidents, stalled vehicles or construction; therefore, traffic jams are more likely to occur. For better control of the traffic at a disturbance the Swedish National Road Administration (SNRA) has traffic equipment which can be controlled from a command centre. This traffic equipment consists of gates and signs with variable messages. This report will discuss the system used for traffic control in Stockholm. It will present proposals designed to improve it.

The purpose of this report was to investigate what characterizes a good psychosocialwork environment, and whether it may have impact on a vessel's safe voyage. Thisreport is proposed to increase the understanding of what creates a good psychosocialwork environment and its potential effect on safety at sea. In order to find out thesuccess factors for a good work environment group interviews were conducted in socalledunstructured focus groups. During these conversations, the participants discussedfreely by the question "what is a good psychosocial work environment for you?? Thesuccess factors were thereafter applied on selected accident reports, to investigate theextent to which they were represented and taken into account.The results of the study show three categories of factors: colleagues, communicationand competence, where colleagues are the main contribution to a good psychosocialwork environment.

AbstractTitel: Diagnosing accountability, a study of accountability of UNT and DN?s medical journalism  ( Diagnos av ansvarstagande, en studie av accountability inom DN och UNT:s medicinjournalistik)Number of pages: 45 (59 including enclosures)Author: Alexandra JohanssonTutor: Göran SvenssonCourse: Media and Communication studies C Period: Fall 2008 University: Division of Media and Communication, Department of Information Science, Uppsala UniversityPurpose/Aim: To evaluate the quality of medical journalism in DN and UNT according to the theories of accountability and responsibility in the media.Material/Methods: The materials and methods used in this thesis are 14 articles from DN and 14 articles from UNT that have been analyzed according to the criterion set forth by Media Doctors, an Australian media accountability system.Main Results: The results showed that DN scored an average of 57% ?satisfactory? and UNT scored an average of 52% ?satisfactory? of Media Doctors rating scale. Strengths were an educational tone and an insightful review of the newest findings in the scientific community. Weaknesses were poor transparency and a tendency to neglect full disclosure of the scientific findings and sources. Focus was also show to be on research and not on information for potential patients.

Hypothermia during anaesthesia is a well-known phenomenon that may cause several side-effects such as greater risk of postoperative wound infection and increased risk of heart complications. The most efficient way to avoid this is to prevent hypothermia from occurring. The aim of this paper was to compile the research on the most efficient way to prevent hypothermia during anaesthesia for cats and dogs, and to compare these results to how Swedish animal hospitals prevent hypothermia today. To investigate this, a survey was sent out to several animal hospitals around Sweden to see what methods they used to prevent hypothermia in their clinics. It is difficult if not impossible to prevent the body temperature from falling slightly when anaesthesia is induced because of the drug interactions in the body that follow from the drugs given. A 1-1,5°C decrease in body temperature is to be expected and is difficult to avoid.

The mobile revolution is here to stay, and today most people have (at least) one cell phone at home. Some even a PDA (Personal Digital Assistant)as a complement for the simpler tasks at the office, e.g sending e-mail, word processing, browsing the Internet etc. Many business have also given the employees the opportunity to do some of the business tasks inbetweeen customer visits with the help from a cell phone or PDA.Despite all this, the so called Internet connected mobile revolution is often mentioned as a big failure. Maybe because the people in general tended not to use the new technology as much as the companies predicted. This could be because they still haven't learned how it works, or just don't seem to have the need for services provided.After a couple of failures in the development process, almost every cell phone has support for mobile Internet today.

This paper presents the results of a workplace study of two smaller companies in the design industry. The core issue has been to investigate the companies use of technical tools and to what extent social praxis influence the daily work. The methods used are based on a qualitative analysis of interviews and observations. Various kind of work procedures, such as verbal and computerized, have been identified, but the most important occurrence was how spontaneous conversations between employees required certain flexibility, since the actors repeatedly were required to change focus and quickly perceive different information. For that reason, a thesis has been defined regarding how the use of spontaneous communication put an indirect need of a flexible working environment and also how this lead to more significant participation and exchange of information, as well as more awareness at the companies..

Too high levels of noise lead to various health problems and cost society billions of SEK peryear. In this thesis we have examined a model of the A40E articulated hauler at VolvoConstruction Equipment in Braås. We have tried to reduce cabin noise in an articulated hauler,while also providing a way on how to proceed with a machine when the cabin does not measureup to the sound requirement. The best way to find leaks were with a reference source of model4205 and its speaker HP 1001 from Brüel & Kjaer in the cab and then walk around and listen towhere the reference source was more prominent. In this way, we found that the edges and theplugs were sensitive areas.

Umeå University currently uses two Course Management System, Moodle and Sakai (Cambro). Both Moodle and Sakai are based on open source code and are today the two more popular choices among Swedish Universities. They both have different strengths and weaknesses both from a technical perspective and a user perspective. This can create problems for a course responsible/teacher when it comes to planning the course structure at a distance course but also when planning the course structure on a campus course that uses a Course Management System. With this as my starting point my formulations of questions become:How do the Course Management Systems that Umeå University uses differs, both from a technical perspective and user perspective?What possibilities is there in the Course Management Systems to use a different Course Structure?Is there a noticeable difference on the view of Course Management System of teachers and students at different departments?The purpose with my essay is to create a basis that course responsible/teacher can use to plan the course structure.

Legionella can be prevented, the question is how. This report is a degree in construction engineering education at Chalmers University in Gothenburg. A comprehensive written publication for Legionella-safe plumbing installations is not available and therefore requested. The purpose of this report is to present preventative measures against Legionella bacteria growth in tap water and in other systems where Legionella bacteria are a potential problem. Technical solutions are presented including how different systems function and what their advantages and disadvantages are.

In order to continue to be competitive in the current industrial climate, producers must increase efficiency at their plants. Several Swedish companies choose to utilise the principles of Lean production. Tour & Andersson AB (TA) has elected to create their own model using Toyota?s productions system which has been named TAPS (Tour & Andersson Production System). Following two years of working with TAPS the company has decided to introduce Total Productive Maintenance (TPM). Most of the work carried out in the maintenance department today is in form of repairs to already faulty equipment.

Abstract In high voltage substations there is an increasing demand for computerized equipment, and automation of operation and supervision. The future primary equipment will provide the possibility to collect more information and to provide better control for improved effectiveness. Since ABB has got a large customer target, each product must be custom made to fulfil the customers (often from different countries) demands. Later these products will be configured by engineers who may not be familiar with the tools used at ABB. This is a very expensive and time consuming.

ADHD is the fastest growing diagnosis of the last decade and there is an ongoing debate about how ADHD should be understood with a psychosocial perspective opposed to a medical perspective. The purpose of this study was to investigate how a Swedish daily and evening newspaper (Aftonbladet and Dagens Nyheter) portrays ADHD. Further, the study asked whether medical or social explanation is used in the discourse that appears in newspaper articles, how ADHD is described as well as which people are quoted in the articles. In this study we used Norman Fairclough´s critical discourse analysis with the 26 sampled articles which we believe highlight different perspectives on ADHD diagnosis.Our study shows that there are representatives cited in the articles from school, the judiciary and the medical field. However representatives from social work are conspicuous by their absence.

This master thesis investigates quality procedures and measuring of solid carbide end mills, with the main focus on measuring equipment. The thesis has been written in collaboration with a special production department for solid carbide end mills at Sandvik Coromant in Gimo. The department?s needs and constraints have been the foundation of the project and the main research question is: how to measure end mills in order to ensure good quality of the produced end mills. The project has contained both a theoretical study consisting of a literature review and practical studies in the workshop with the objective to identify an end mill?s main parameters and the relationship between an end mill?s geometry and the manufacturing processes.

This degree projekt deals with Skanska´s safety at the construction site with focus on personal safety equipment. The purpose of this dissertation is to examine how the rules of personal safety equipment are applied and experienced at Skanska´s construction sites.In October 2004 Skanska started a projekt to make the construction sites more safe. With use of a questionnaire we have made a survey at different construction sites. 80 questionaires have been handed out to Skanska´s employees in the southeast region. While they were handed out we conrolled if the employees at Skanska´s construction sites used head protection, easy visible clothing, safety shoes and identification cards.The result of the survey shows how the rules are applied.

Trioplanex International AB is a part of the group Trioplast Industrier AB, which produces packaging materials for the film and hygiene industry. The group is active throughout Europe, where most of the production is located in Sweden, with head office in Smålandsstenar. Operations in Landskrona consist of Trioplanex International AB and Trioplast Landskrona.Semi-finished articles consisting of paper cores, so called bobbins, give rise to a high amount of core waste in any form of core cutting. The objective of the report is to map out all core waste and illustrate the material flow with regard to present layout and equipment.In the beginning of the project an analysis of the current process was carried out with focus on the cutting equipment. A case study in the form of an improvement work took place in order to reduce the causes which had the biggest impact on existing machinery.Improvement proposals were discussed by the author together with supervisor, assigner and other parties involved.