The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

In the essay, the view of mistakes and disciplinary sanctions within the military aviation and health and medical service, are compared. The comparison shows that military aviation and health and medical service could have several points in common on how mistakes may occur, but that the present view of mistakes is different betwen the sectors. The view of mistakes and disciplinary sanctions is explicit within military aviation, and is based on a clear ideology on how mistakes occur, which is characterised of a systematic approach. Within health and medical service, an explicit and unequivocal ideology on how mistakes occur is missing, but, however, there are implicit ideas about infallibility and perfection. The comparison indicates that the view of mistakes is also, possibly directed by a bureaucratic model (instead of an ideology on mistakes), which aims to legitimacy, but that this may happen on the expense of not taking surrounding circumstances into consideration.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

This essay is a study that takes interest in technical and technological change essential to philosophy of science. What is shown is the importance of an active attitude towards this change, by the articulation of the question: Does technical development lead to new ontological questions for science? - and by the answer that such questions do appear.It is clear that passive assumptions in this matter might prohibit science in the proceeding search for truth.By examples of ways in which technical development helps and challenges science, it is concluded that scrutiny of the relationship between technical development and ontological suppositions and hypotheses within science is well motivated..

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

In order to decrease the disturbance from a cable testing equipment, the company Ericsson Network Technologies in Falun determined to design a new series resonant test system with a lower frequency. The new equipment is of series resonant type with a system frequency of 500 Hz. This equipment consists of an inductor, a capacitor and a voltage source. The voltage source is the same as the old one, the cable acts as the capacitor but the inductor has to be designed especially for the new equipment. In this thesis work several air coil inductor types were examined.

More than half of the implemented IT-projects go over budget, deadline or simply fail. The processes in an IT-project requires technical competence to be present among the project participants to ensure the achievement of business goals and to make organisations competitive. The success of an IT-project largely depends on the project manager which makes it interesting to further investigate what impact the project manager?s technical competence has on the project. Previous research shows differing opinions whether technical competence is considered important for the project manager to be successful or not.

The trotting in Sweden has a good reputation in an international view, both in the perspective of success and how the sport is managed with focus on security, animal protection and animal welfare. A large number of equipment details are fitted on the horses during training and competition. The Swedish law of prevention of cruelty to animals regulate training and competition with racehorses, and propose to protect horses from unnecessary suffering. The equipment permitted in races is regulated in Tävlingsreglementet (The Regulation of Competititon) and in the regulations of equipment, that the Nordic Regulation Committee and Nordic Animal Welfare Committee have worked out. Due to training and competition the equipment must even meet the Swedish law of prevention of cruelty to animals. However, the behaviour or the senses of the horses is often affected by the equipment due to the way the equipment corrects, modifies, restrains or reduces the behaviour of the horse, which may cause the horse stress or discomfort.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The aim of thesis was to, through a action research study and through individual interviews with five students, clarify their perspective on educational assistance in high school. The study shows that students prefer teaching in small groups outside of regular whole class because it gives the them access to the factors they consider crucial for a functioning support-time whit a skilled and dedicated teatcher, in a calm and safe environment. Moreover, the students claim the importance of technical equipment especially in the Swedish subject, but also in other subjects. Today the educational assistance varies from an outside-the-class teaching situation to a whole-class situation with teacher support as well as technicaal equipment. When the student were asked to describe the cinditions under which studies can be conducted with the whole class they tried to imitate the learning environment they have in a small group.

This work covers a broad analysis of the risks that could impact the achievement of electrical safety of electrical installations. The work includes both electrical equipment such as the installation of electrical equipment.The report illustrates the main technical characteristics of electrical connections greater than 10 mm2 and provides an introduction to the crimping systems for copper and aluminum conductors. In addition to that analyzes the factors that are important to assure the quality of an electrical connection throughout the value stream in terms of both materials such informations. Furthermore analyzed deeper the need for skills development of technicians and other staff.The different parts of this work are analyzed and presented, in theory to studies carried out both at Elpress AB and partly with the help of other scientific reports dealing with similar subjects. In addition, presents a survey that will help understanding the current perception of the electrical connections and cable crimping systems among end users.

This Thesis is performed in cooperation with Kalmar Industries in Lidhult, Sweden. Theprojects main purpose was to develop a draft design of a test equipment. The equipmentwill simulate and valuate the drive-train and brakes at Kalmar?s bigger forklifts.The equipment will be designed so the wheels of the forklift are placed on two rollers;these absorb and affect the forklifts brake- and driving force. With this characteristic anup- and downhill can be simulated.

This thesis for the Master of Science degree was performed at Oppunda Electronics AB. The assignment was to further develop an existing prototype of a dispensing equipment. The dispensing equipment doses a kind of glue, bonding which dentist use to mend teeth. The dispensing equipment is adjusted to dose 12 micro litres of bonding. With the dispensing equipment SafeBond Electronic the user can reduce the bonding consumption with approximately 50 percent.

Talking about sexuality -Medical staffs´ experiences of conversations about sexuality with patients at a cardiology unit The background of this essay is the taboo to talk about sexuality among people who suffer from some kind of illness. When a person gets ill and need medical attention, his or her life changes dramatically. The patients get treatment for their symptoms. The illness and treatment have often an influence on the patient?s sexuality.

Advanced homecare, district nurses experiences, palliative care, quality of life,Advanced homecare is an arranged specialized medical service doing nursing round-the-clock. The care is preformed in cooperation with a multi-professional team formed of different professions. Advanced home care is mostly palliative care. The purpose is to give the patient better quality of life and anticipate, survey and palliate symptoms. The aim of this study was to describe the experiences of district nurses using advanced homecare when nursing patients with palliative care at home.