Sök:

Sökresultat:

1944 Uppsatser om Medical technical equipment - Sida 15 av 130

Bike Around

Physical activity can reduce the risk of developing dementia, and studies show that people who already have some form of the disease can get a better memory function and find it easier to perform daily tasks if the activity is performed regularly. People who are diagnosed with dementia are generally not offered physical activity to a high extent, nor is there a wide range of equipment developed to suit the target group.The Bike Around project was launched during a workshop in Copenhagen and was organized by HCH and Techna Science with the aim to develop new training equipment for people with dementia. The workshop resulted in the development of a customized training bike where the user can get a biking experience from his wheelchair or favorite chair. By integrating the pedal movement with a prerecorded movie projected on a screen, the memory can be stimulated both visually and by the activity itself.Our assignment in the project consisted of three parts: design of the bike, movie playback and software programming. During the project a prototype has been created that meets the requirements of ergonomics and usability..

Hur hanterar institutioner en miljö med blandade Operativsystem?

The purpose of this thesis is to investigate if there are environments that use some kind of central authentication system within institutions/schools. The hypothesis is that an institution not using a form of central authentication service has more need for maintenance and as such is considered a higher cost for the organization. The gathering of data has been done through interviews with technical personal at Blekinge Tekniska Högskola and Linköpings Universitet. Based on the technical background of the authors, and the system limited to discussing Windows and UNIX operating systems, a discussion and analysis of the systems working today has been done, with emphasize on the hypothesis..

Att utveckla medicintekniska informationssystem på rätt sätt : En studie om regulatoriska aspekters påverkan på systemutveckling och IT-innovation inom hälso- och sjukvård

IT is often seen as a solution to many problems concerning effectiveness in organizations. Information systems within the healthcare sector is often viewed as medical devices rather than just systems or services. These medical devices are thoroughly regulated by laws, standards and certifications. In this study I participated in an innovative project that aimed to bring new life and use to the old fashioned patient journal by giving it a visual representation through the use of an avatar. I aimed to study the effects of regulators connected with the patient journal as a source of information for the innovative project.

Servicekvalitet på Linköpings stadsbibliotek ? ur tre fokusgruppers perspektiv

The main purpose with this MA thesis is to examine how visually impaired, disabled and people with dyslexia define service quality at the public library of Linköping. The method that has been used is focus group interviews. A focus group consists of four to eight people who are joined together, without knowing each other before, to discuss a certain subject. The aim is to get a wide spread of answers. A secondary purpose is to examine how this method works.

Interaktiv vittneskonfrontation : Utvecklandet av ett Directorspel för Internet

This final-year project has been performed at Strix production Efterlyst. The task has been to make a page under their homepage, with a game application that?s supposed to be interesting and also have a strong connection to the TV- program. In the first part of the report, the reader will learn about the preparing work that was done before the work with the final game began. It is in these two test versions all the technical problems were tested, to finally be used or thrown away.

  Genomgång av Turbomin 100 :   Förstudie och föreslagna förbättringar av undervisningsjetmotor Turbomin 100

ABSTRACTThis project thesis has been written at the request of Mälardalens University, Västerås.The aeronautical engineering students at Mälardalens University and the pupils of Hässlö upper secondary school, all gets the opportunity to perform a computation lab with a real turbojet engine during their study. The goal of the lab from the University is that it should give the students applied experience from the theory part of which has been tought in the course ?Aircraft Engine Technology?.                      The pupils of the Hässlö upper secondary school are performing simpler calculations from the measured values of the equipment. This turbojet engine is located at Hässlö airport in the premises of Hässlö upper seconday school.Since the installation 1989, the engine has lost both thrust and reliability. This makes the theoretical computations made by the students inaccurate.

Design och konstruktion av laborationsutrustning till en kraftelektronikkurs

The purpose of this degree project was to build laboratory equipment for a new course in power electronics that starts this autumn 2010 at Uppsala University. The equipment is intended for student labs and it covers the most important areas of the course including rectifying, buck-/boost-converters and PWM-modulation. It is built as one sealed unit where all the electronics are built-in but visible and it has a connection board where students safely can connect the different circuits. The project has advanced from theoretical studies of circuit design, choosing of components and simulations to drawing the printed circuit board (PCB), soldering, case building, final testing and troubleshooting - basically most steps from an early idea to a final product. Measurements on the final product gave about the same results as the earlier simulations of the circuits and the result is overall satisfying..

Dramawebben: Att välja tekniska lösningar för digitalisering

This study is predominantly qualitative. It is also descriptive to a large extent and notoriented towards hypothesis-testing. The study aims at studying what has influenceddigitization of old Swedish dramatical works through the Dramawebben projekt, whilefocusing on the technical solutions. Four different data collection methods have been applied.Interviews and a questionaire with open-ended questions were the two primary tools. Adocument analysis and observations were applied as well.Examples from earlier research to relate to questions about digitization as an institutional andsocietal practice are presented.

Förbrukningsreduktion : Ett alternativ till gasturbiner som snabb aktiv störningsreserv?

The gas turbines in the Swedish secondary reserve are reaching the end of their technical lifetime, hence alternative solutions need to be considered. One of the solutions thought to have the greatest potential is the use of so called consumptionreduction. By entering contracts with large consumers, agreements are made to reduce consumption in the event of major disturbances in the power system and thus being used as a secondary reserve. This thesis investigates the feasibility of consumption reduction as part of the secondary reserve. This has been achieved by developing a requirement specification for the disturbance reserve and by studying the technical and economic potential for consumption reduction among a range of consumers.The technical potential for consumption reduction that fulfils the requirements for participating in the secondary reserve are on average 750 MW in SE 3 and 98 MW in SE 4.

Modellering av delvis kända objekt med hjälp av bilder

Today many different types of lock systems are used all over the world. Passwords, finger prints and magnetic strips are a few examples. When the key is a three dimensional object, lika a physical metal key, the security depends, in a high degree, on that you can?t copy the object without access to it. One approach to copying the object is photographing the object, and from these photographs create a copy.

Framtagande av OEE-mall

At Volvo Cars Torslanda's paint shop there is a requirement to in a fast and effective way get an overview of the plants capacity. Therefore a capacity template was constructed as a tool for the engineers at Volvo several years ago. This template has during the years become complicated and outdated. Thus this thesis work will resort as a new capacity template, built from scratch. The new template has been built up based on requirements from Volvo and the concept of OEE (Overall Equipment Effectiveness).

Förpackningseffektivitet vid Volvo construction equipment
AB, Component division

Vid Volvo construction equipment AB, Component division i Eskilstuna, har nedväxling i förpackningsstorlekar genomförts som en del i en omfattande omställning mot Volvo Production System och Lean. Genom att producera med mindre satsstorlekar och hemtagningskvantiteter, vill Component division sänka sin kapitalbindning och bli flexiblare mot variationer i produktionen. Dessvärre påverkar nedväxlingen förpackningskostnaden till följd av ytterligare hantering, transport och administration. För Component division är det viktigt att få en god uppfattning om hur alla förpackningskostnader utvecklas med tiden. De vill i framtiden följa ett lämpligt nyckeltal för att se hur effektiva de är inom förpackningslogistik samt hur beslut och förändringar påverkar kostnaden.

Möjligheter och hinder för att utöka omfattningen av RoHS-direktivet

The RoHS Directive was introduced in order to restrict hazardous substances in Electrical and Electronic Equipment, EEE. It currently restricts the use of six hazardous substances/compounds; cadmium, lead, mercury, hexavalent chromium, PBB, and PBDE. The RoHS Directive currently includes category 1-7 and 10 in the categories of EEE listed in Annex 1A to the WEEE-Directive (Waste of EEE). The aim with the report is to investigate and elucidate prospects and obstacles to increase the scope of RoHS. This report mainly considers the inclusion of product categories 8 (Medical Devices) and 9 (Monitoring and Control Instruments).

Funktionaliteten i skogsmaskiners GIS-system

Holmen Skog is currently using a GPS-program called TraktInfo, originally developed within the company. They are now planning to switch to a new GPSprogram or allowing the contractors to buy other programs available from the logging equipment manufacturers. To be able to offer this flexibility, Holmen Skog needs to obtain information about the features offered by the different manufacturers in their specific programs, and also when the manufacturers are planning to start selling programs adapted to the new standard called StanFord2010. According to the study, the manufacturers are hesitant to StanFord2010 and there has also been a lack of clear signals from the customers and clients about what kind of different new features to include in the programs. The feature most frequently used by forest machine operators today is the option to keep record of the harvester?s path by creating a ?log plot?. This feature was not used to its full potential however, since only one out of eight of the forwarders included in the study had computers that were compatible with the harvester?s computer.

Sjuksköterskan som höll min hand... Intensivvårdspatienters upplevelser av att vara intuberad eller tracheostomerad - en litteraturstudie

Being a patient in intensive care can be experienced terrifying. Studies have demonstrated the link between unpleasant memories of hospitalization in the ICU and the development of posttraumatic stress disorder, depression, anxiety, and perception of quality of life in its aftermath. Placed on a ventilator, the patient is exposed to multiple invasive procedures. The aim was to describe critical care patients' experience of being intubated or tracheostomated. Method: Literature review using conventional content analysis.

<- Föregående sida 15 Nästa sida ->