Antalet anhörigvårdare i Sverige är många. För att de anhöriga ska orka vårda sina närstående 24 timmar om dygnet, sju dagar i veckan behöver det finnas ett stöd. De anhörigstöd som finns varierar från kommun till kommun. Ett anhörigstöd som har utarbetats för att underlätta insatsbehovet är COAT- Carers Outcome Agreement Tool som syftar till att kartlägga anhörigas behov, planera och följa upp anhörigstöd. COAT har en grund i partnerskapsmodellen och i modellen ses den anhörige som experten på situationen runt den närstående.

The information technique is developing at a fast pace and almost all new technique is being welcomed with opened arms. The newest on the market is the tablet device, it´s a device used for surfing the web, sending email, watching movies and playing games. It is now also being used in some schools for educational purposes. My research goal has been to find out how the teachers feel about using the tablet device for educational purposes. I have conducted interviews to find the answers to my questions.

Problem: Should the european competition law be used as a integrationfriendly tool? Purpose: The purpose of this thesis is to analyse wheather europena competition law should be govenrned by the aim of integrating the european market. Method: A traditional swedish law method har been used. Result: My conclusion is that marketintegration in itself should not be the only aim when applying european competition law..

According to the curriculum for primary schools, pre-school and after-school Lgr11 says that students should experience different feelings and moods using different forms of expression including drama (Lgr11 2011:10). The purpose of this study was to examine how educational drama is used in three elementary schools and for what purpose in teaching. The aim was also to examine the four teachers' perceptions of what educational drama means to them.I have used a qualitative approach with interviews and contacted four teachers from three different schools to get different information for my study. Three of them were educated teachers and one of them was an actor. The information provided in the interviews was analyzed using educational drama theory and previous research. The interviews with the teachers and the actor showed the use of different methods of educational drama in education.

The purpose of the essay Multi criteria analysis of potential conflicts concerning land use planning - natural stone mining in Lysekil municipal is to study possibilities and limitations in GIS based multi criteria analysis as a tool for land use planning. How GIS based multi criteria analysis can be implemented to localize potential conflict areas between natural stone mining and other land use activities and what advantages and disadvantages the method holds are the main issues of this study. The essay studies these questions through a case study, concerning the geographical area of Lysekil municipal in western Sweden and problematizes the interest of natural stone mining in relation to other land use interests. A literature study was carried through, concerning multi criteria analysis and planning. After collecting and processing of data the multi criteria analysis could be implemented in the ArcGIS tool Weighted Sum.

Introduction:Corporate limits becoming more diffuse due to the globalization taking place and requirements for analytical strategies are becoming more fundamental parts of organizations. Business Intelligence systems are hot and not without reason, today's world is spinning faster and with a flow of information that is constantly increasing Business Intelligence promises to introduce a support that will render a better decision-making, something that everyone wants.Problem Discussion:The local government business has today demands from the Swedish School-inspection to analyze and create adequate target images to the school and students meet curriculum goals and guidelines. Therefore, local government activities has increasingly begun to implement Business Intelligence tools, with the purpose to facilitate strategic and operational decisions were the result plays an increasing role in today's society.Purpose:This study evaluates how the analysis tool Qlikview fulfills the function of monitoring and controlling the improved student achievement in public schools.Method:The evaluation has been conducted qualitative interviews with staffs that have leadership positions in each municipality and management and possess a deep knowledge of the analysis tool and its processes.Conclusion:The evaluation has shown positive effects on the monitoring and control of student performance through better control of school operations..

Resource-based learning or problem-oriented learning are teaching methods that are becoming more and more common in schools today. In order to make these teaching methods work there is a demand to make students information literate. This entails that school librarians ought to play a more important role in teaching than before since they are the ones that are the most qualified when it comes to mediating information skills. The aim of this thesis is to find out how nine teachers at six senior high schools apprehend the professional role of the school librarian and how they apprehend the conception of information literacy In order to learn about these conceptions we have chosen to study to what extent collaboration exists in the schools in question and the teachers conceptions of the importance of the school librarian in this context. We have used phenomenography which is both a set of theoretical assumptions and a methodology.

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

The main aim of this master thesis was to see the process of an interactive online reference service from idea to final product. The reference service we have studied is developed and used by the Library of the National Institute for Working Life in Stockholm, Sweden and goes by the name phibi. Our goal was to review the whole realization process from the reasons why a service like this was created, how the service was introduced and implemented inside the organisation and finally what the result and consequences were for both the library staff and for the users of the service. Phibi is designed to be a tool that fosters communication between the library staff and the remote users where the users get the opportunity to be helped with their questions by the library staff although they are not physically present in the library. To understand the process we conducted a case study with 11 interviews of the library staff, the superior and the initiator to phibi.

There have been, in some rare cases, difficulties with clamping of inserts with U-holesin their tool holder. According to the complaints, the inserts could not be properlyclamped or could fracture when clamped. A study has shown that variations inclamping behaviour are mainly depending by the position of the screw hole in the toolholder and the centering of the screw hole in the insert.The focus of this project has been the centering of screw hole in insert. It has beenshown that the screw holes are not always enough centered in the insert. Theproblem may occur after a certain step in the production, i.e.

Are agency and responsibility solely ascribable to humans? The advent of artificial intelligence (AI), including the development of so-called ?affective computing,? appears to be chipping away at the traditional building blocks of moral agency and responsibility. Spurred by the realization that fully autonomous, self-aware, even rational and emotionally-intelligent computer systems may emerge in the future, professionals in engineering and computer science have historically been the most vocal to warn of the ways in which such systems may alter our understanding of computer ethics. Despite the increasing attention of many philosophers and ethicists to the development of AI, there continues to exist a fair amount of conceptual muddiness on the conditions for assigning agency and responsibility to such systems, from both an ethical and a legal perspective. Moral and legal philosophies may overlap to a high degree, but are neither interchangeable nor identical.

This study examines the use of building modeling and energy simulations in the design process  of  a  building.  The  take-off  point  is  the  notion  of  energy  simulations  being needed early and throughout the building design process, and that the lack of energy simulations may be explained by the fact that they are time consuming and therefore often too expensive. A greater interoperability between software tools used by relevant disciplines,  such  as  the  architect  and  the  energy  specialist,  would  create  smoother workflows, which would reduce this cost and open up for more frequent and iterative energy  simulation  processes.  The  study  is  an  assessment  of  the  modeling  tool  Revit and  the  simulation  tool  Virtual  Environment  and  whether  they  can  create  smoother workflows, and make leeway for a more frequent use of energy simulations throughout the  design  process.  It  also  investigates  the  limitations  of  what  can  be  examined  by simulations in Virtual Environment. This will hopefully help clarify the future role of energy  simulations  in  design  processes.  The  method  is  a  trial  by  error  approach  of testing the two software tools by building and simulating a model. The results of these tests  show  that  the  workflow  is  not  optimal  (and  therefore  time  consuming)  for frequent  and  iterative simulations  throughout the  design  process,  but  it  also  reveals some  great  possibilities  of  what  can  be  performed  with  these  two  powerful  tools  at hand.  Further  development  with  regards  on  platform  independency  of  the  building information  model,  including  seamless  exporting  and  importing,  seems  necessary  to strengthen the future role of energy simulations..

The main aim of this master thesis was to see the process of an interactive online reference service from idea to final product. The reference service we have studied is developed and used by the Library of the National Institute for Working Life in Stockholm, Sweden and goes by the name phibi. Our goal was to review the whole realization process from the reasons why a service like this was created, how the service was introduced and implemented inside the organisation and finally what the result and consequences were for both the library staff and for the users of the service. Phibi is designed to be a tool that fosters communication between the library staff and the remote users where the users get the opportunity to be helped with their questions by the library staff although they are not physically present in the library. To understand the process we conducted a case study with 11 interviews of the library staff, the superior and the initiator to phibi.

This thesis work includes studies and simulation how magnetization of the translator in a linear generator for wave power can be automated. The translator is the moving component in the generator that is "dressed" with permanent magnets. The translator is magnetized with rectangle-shaped permanent magnets that are today's strongest permanent magnet type of neodymium-iron-boron (NdFeB).Eight equivalent metal sheets are mounted around the translator. The plates have milled tracks where 106 permanent magnets per sheet are mounted. Today the assembling of the magnets is done by hand, which is a very tedious and time-consuming work.  This project presents investigations about the automation of the translator magnetization theoretically and simulation results are preformed in ABB's robot simulation software RobotStudio. Even robot-held tool was designed that enables the robot to be able to magnetize the translator in a simple manner.  The investment cost is roughly 1.5 million SEK. With an economic life-time of five years, the investment costs are estimated to 24000 SEK / month.  According to the calculations, this project is very motivated to implement, as it provides savings up to 17 000 SEK per translator which is 10.2 million SEK assuming that the robot cell is operating at full speed the whole year.According to this thesis work the result is a 4x9 meter cell with two industrial robots of the type ABB IRB6650S.The cycle time to magnetize one translator was calculated to about 10 hours.This prototype of project can possibly be implemented in a full-scale production line and performed according to the calculations and simulations presented in the report. Further work is suggested to improve the tool.Lyssna .

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.