Sök:

Sökresultat:

3066 Uppsatser om Mechanics for resilient construction element - Sida 35 av 205

Framtidens D250S Dual batteriladdare

This thesis aims to develop proposals and models for a modular electronics construction to a future D250S Dual battery charger. The aim also includes investigation of possibilities to use some of Texas Instruments C2000 microprocessors. The reason for this is that CTEK SWEDEN AB wants to renew the present D250S Dual battery charger and lower the manufacturing costs. The thesis work has involved gathering theoretical facts for the development of a design on the modular electronic construction, the choice on which microprocessor to use, the choice of electronic components and facts about peripheral equipment to the D250S Dual. With the theoretical there has been developed different solutions to the proposed hardware and software solutions with comparisons in aspects of positive and negative.

Tillbudsrapportering inom JM : En analys av förbättringsarbetet

The construction business is one of the most accident prone businesses in Sweden. In order to make it safer it?s vital that all employees of a company report all accidents and incidents that occur. This report intends through qualitative interviews, to analyze the knowledge and attitude towards incident reporting among the employees of the Swedish construction contractor JM.The goal of the thesis work is to hopefully contribute to an increase of employees? awareness on those issues.

Konstruktion av en autonom vindstation

Construction of an autonomous wind station was a project with the goal of creating a product that could collect wind data from a sensor and then transfer this data to a server wirelessly over the GSM network. The device would be powered by batteries and solar cells and function fully without requiring external power supply. This required that a small computer was constructed and programmed to store and send data at predetermined cycle times and programming of a server that received the sent data. The project also required optimization of power consumption and dimensioning of solar cells and batteries based on this. The construction of this station demanded research both for the selection of hardware and programming software. The computer was based on a microcontroller and a GSM module that sent the data over the 2G network.

Institutioners makt - att integrera makt i institutionell teori

Institutionell teori förklarar socialt liv genom att undersöka institutioners påverkan på sociala relationer. Institutionella föreställningar ses som närvarande i alla sociala relationer genom kulturella, kognitiva och normativa institutionella element, som ges stor betydelse i denna teoribildning. Denna uppsats syftar till att problematisera institutionell teori genom att införa maktaspekter i teoribildningens förklaringsmodeller eftersom detta hittills varit ovanligt i institutionella analyser. Särskilt de förklaringsmodeller som betonar kulturella och kognitiva element har saknat maktaspekter. Uppsatsen är ett integrationsförsök mellan institutionell teori och maktteori.

Konstruktion av current conveyors via makromodellering

A current conveyor is an active building block that can be used to implement most active and passive components. It differs from the operation amplifier in that it uses current instead of voltage. The current conveyor also has significantly higher voltage gain over a broader frequency range. To simplify the construction of analogue circuits and increase the construction efficiency it is desirable to use a top-down methodology. This means that the whole system is partitioned into a hierarchy of subsystems.

Hur arbetas det med läs- och skrivsvårigheter i skolan?

How do we match our education with the needs of the construction line of business and the requirementsof the Swedish National Agency for education? Is there something that we have to change?In this study I have asked our former students about their opinion of our education and I have also asked them to give me their view on what a good teacher is like. I have been able to benefit a lot from their answers in my efforts to be that good teacher. This survey took place at Facebook.The answers showed that we carry on a piece of solid workmanship. But you can always improve, try harder.

Prefabricerade byggelement : En konceptbeskrivning

Byggandet idag går allt mer åt det industriella hållet. Många företag har övergått från platsbyggnation till att använda sig av mer eller mindre förtillverkade element i sin produktion. Viktiga begrepp inom prefabricering är slutna respektive öppna system och ytrespektivevolymelement. I Falun finns företaget Panorera AB som med företagsegna (slutet system) prefabricerade komponenter bygger en- och flerbostadshus. De har även utvecklat ett färdigt koncept med standardiserade ytelement som bildar moduler.

Rullarmering - Ett rationellt sätt att armera

This is a degree project performed at Halmstad University in Sweden on the subject carpet ofreinforcement. This project is developed in association with Celsa Steel Service in Halmstad.The purpose of this report is to investigate how much time that can be saved if carpet ofreinforcement is used instead of the traditional way to work with reinforcement and seewhat kind of parameters that is important between the choices. We are also going to seehow this product affects the situation for reinforcement workers from an ergonomic point ofview.Carpet of reinforcement is made by straight reinforcement?s bars that are welded togetherwith steel bands. These rolls are made at a factory with a machine that welds together thebars in determined centre distance, with desired dimensions after the constructionengineers? blueprints.

SafeTool : Implementering av RFID-teknologi i maskiner för byggbranschen

Every year more than 6000 thefts, to a value of 1.5 billion SEK, are reportedwithin the Swedish building trade. Plus all the indirect costs of having theconstruction site standing still.SafeTool is a newly started company that will try to prevent this problem witha modern technology solution.The key to SafeTool?s solution is RFID ? Radio Frequency Identification ? andthe solution looks like this;All tools are stored in a container on the construction site. Every tool isequipped with a RFID-tag that uniquely identifies the tool. With antennas in thecontainer it is possible to detect when a tool is leaving the container and whenit comes back.

Hållbart byggande i urbaniseringens tecken ? En studie av det framtida underjordiska byggandet i Sverige

Denna rapport ger en bild av vilka olika saker byggherrar i Sverigeanvänder sig av idag för att öka den sociala hållbarheten. De projektsom studerats är Bygga om Dialogen i Malmö, Älvstaden i Göteborg,Vivalla i Örebro och föreningen Byggemenskap.Genom att intervjua en person från varje område studeras likheteroch skillnader i hur man arbetat med den sociala hållbarheten vidbyggnation. I Malmö och Örebro studeras arbetet med att öka densociala hållbarheten vid renoveringsobjekt, hur får de hela områdensom länge haft ett dåligt rykte att bli socialt hållbara där stort fokusligger på att anställa långtidsarbetslösa.I Göteborg och i föreningen Byggemenskap fokuserar man på attföra in den sociala hållbarheten vid nybyggnation och hur vi kan byggahyresrätter som har en lägre hyra än nybyggda lägenheter i dagslägethar..

"Inte supporter, men ..." : En kvalitativ studie av hur lokala sportjournalister förhåller sig till "sina" elitlag

The purpose of this study was to examine how local producers in the food and confectionery segment in Västernorrland, Sweden, working to communicate that the product is locally produced through its packaging design. We have chosen to look at how they work with the right packaging design because it is such an important part of the product marketing. A further aim was to examine how consumers perceive the packaging design of the locally produced products and how they consider that the packaging design communicates the product as locally produced. We have also analyzed the graphical elements contained in the locally produced product packaging through a semiotic analysis.The theoretical framework is based on theories in brand communication and Visual Communication, specializing in packaging design?s visual elements.The method used in this study is a qualitative method.

Do it yourself : En studie om lokalproducerade produkters förpackningsdesign

The purpose of this study was to examine how local producers in the food and confectionery segment in Västernorrland, Sweden, working to communicate that the product is locally produced through its packaging design. We have chosen to look at how they work with the right packaging design because it is such an important part of the product marketing. A further aim was to examine how consumers perceive the packaging design of the locally produced products and how they consider that the packaging design communicates the product as locally produced. We have also analyzed the graphical elements contained in the locally produced product packaging through a semiotic analysis.The theoretical framework is based on theories in brand communication and Visual Communication, specializing in packaging design?s visual elements.The method used in this study is a qualitative method.

Kassaflöde och Kapitalbindning. En studie av vilka åtgärder och faktorer som vägs in i beslutssituationer i bygg- och anläggningsbranschen.

Background: Today there are high claims on organizations to show a positive economic view. To satisfy the demands and expectations from interested parties it is very important to carefully plan the companies tied up capital and cash flows. Purpose: The purpose with the thesis is to describe what actions organizations take to resolve the conflict between showing a positive cash flow and the need to tie up capital.The purpose is also to explain the different factors that must be considered when making decisions regarding cash flow and capital tied up. Method: A qualitative study of the actions and factors wich must be considered when decisions in swedish construction companies are made regarding cash flow and capital tied up. Results: A model of the factors and actions that affect cash flow and capital tied up in projects.

Jämförelse av funktionsbibliotek för JavaScript

När de traditionella skrivbordsapplikationerna görs om till webbapplikationer, ställer det krav på JavaScript som används mer och mer för att få fram ett responsivt gränssnitt på webben. För att underlätta utvecklingen av JavaScriptapplikationer har ett antal funktionsbibliotek skapats. I vår studie undersöker vi därför vilket av de två populäraste JavaScriptbiblioteken idag, jQuery och Prototype, som presterar bäst i dagens mest använda webbläsare. Dessa tester har utförts i ett testramverk som vi själva utvecklat för att vara webbläsaroberoende och inte kräva något av de bibliotek vi testar. Testerna är uppdelade i fyra testfall som körs 20 gånger för att ge ett mer tillförlitligt resultat.

Manliga veganer : En narrativanalys om manliga veganer och maskulinitet

The purpose of this essay is to investigate the subject field of male vegans and masculinities through empirical method interviews and narrative analysis. The starting-point for this essay is animal ethics, feminist ethic vegetarianism and theories that suggest that eating meat is one part of the social construction of masculinities. The problem formulation is such as follows:How do male vegans construct masculinity? In an attempt to answer such a question there are three problem formulations:What do male vegans think about the connection between manhood and eating meat?How do male vegans relate to the norms in society?What do male vegans think of stereotype conceptions about vegans?I will come to the conclusion that male vegans think that eating meat, as well as drinking beer, is one part of the social construction of masculinities. Male vegans are aware of norms in the surroundings and the strong attachment of meat normativity in the western culture.

<- Föregående sida 35 Nästa sida ->