Uppsala County has ambitious environmental aims for the planned residential area inÖstra Sala backe. In this thesis different energy sources have been evaluated todetermine which system that would be most favorable given currently availableinformation about the project. Planned energy usage has been divided into tap waterheating, space heating and power. Three base case scenarios were made with districtheating, small scale bio fuel and heat pump. Solar power and solar heating were thensimulated and the production from the two could individually be deducted from theenergy need in the base cases, constituting 9 different scenarios.

Background: Patients with cervical spinal cord injuries are often dependent on a mechanical ventilator due to the damage on the innervation to breathing musculature. During rehabilitation they have to be trained to regain own breathing. This unweaning process may give respiratory complications, which are main causes to morbidity and death. These respiratory complications are traditionally treated in an intensive care unit (ICU), which means that the patients have to return back to these emergency units.Aim: To investigate number, length and causes of returns to intensive care units and the length of the weaning process. Further, to compare if a multidisciplinary approach to the weaning process may reduce ICU returns and to shorten the weaning process.

The aim of this study is to describe how a theme about vitamins and analytical chemistry can be planed and implemented in a summer research school managed by AstraZeneca. The description of the theme is intended to be used as an instructor?s guide to upcoming summers-research-schools with the same theme. The students, which participated in the summer school of 2007, went to upper secondary school. During the summer school they were going to investigate the content of vitamin C in different fruits and vegetables.

In order to increase the independence in everyday life of the elderly population, we have developed a lifting aid for loading in the private car trunk. Independence from outside assistance affects self-esteem in a positive direction and can help increase the quality of life for a large group of individuals. As people age and experience changes in performance, it is important that aids and support is available, particularly to reduce the experience of aging and it?s increasing physical limitations. The aim was to develop a function prototype characterized by simplicity, which facilitates loading of the private cartrunk.The project was conducted at the request of Autoadapt AB, which is one of the leadingactors in car adaptations for individuals with disablilities.

Värdering till verkligt värde infördes i regelverket 1 januari 2005 i och med införandet av IAS 40. IAS är en förkortning av International Accounting Standards och IAS 40 ger börsnoterade bolag med förvaltningsfastigheter möjlighet att värdera och redovisa dessa fastigheter till historiskt anskaffningsvärde eller verkligt värde. Efter införandet har de flesta börsnoterade bolag valt att redovisa till verkligt värde.För att belysa problematiken med värdering och redovisning till verkligt värde används förvaltningsfastigheter som ett illustrationsexempel. Detta för att se hur kreditinstituten genomför värderingar och hur de påverkas när börsnoterade bolag redovisar till verkligt värde. Syftet med uppsatsen är att utröna om det föreligger några risker när verkligt värde appliceras på förvaltningsfastigheter.Djupintervjuer med tjänstemän på kreditinstitut har genomförts för att bringa klarhet i hur kreditinstituten ser på och hanterar värdering och redovisning till verkligt värde.Kreditinstituten använder sig av värderingsmodeller för att värdera enligt verkligt värde vilket inte är i enlighet med värderingstrappan.

Certain types of waste, e.g. bottom ash originating from municipal solid waste incineration (MSWI bottom ash) can be used as road construction materials. A potential problem is the possibility of substances leaching out of the road and spreading in the surrounding groundwater.The aim of this master?s thesis is to conclude whether hydrogeological type settings can be employed to, based on local conditions, provide an estimate of the probable spreading of these substances in the surrounding groundwater, and whether certain types of soils can be identified as being less suitable for the localization of a MSWI bottom ash road. A hydrogeological type setting is defined as a mappable unit with similar hydrogeological properties.

Certification systems, that assess companies? work with social and environmental issues, have emerged in an increasing number of industries. Today, there are environmental certifications for the food industry, the forestry, the fisheries sector and several more. In apparel industry, certification for sustainable working conditions has been of major impact. The property sector is no exception from other industries.

The Master Thesis work this report is based upon has been conducted in cooperation with Svea Teknik AB. Svea Teknik is a consultant firm which is developing parts of a tunnel boring machine on behalf of Atlas Copco. The machine is being developed to mechanically excavate hard rock by fixating itself in the tunnel and then press a large rotating cutter-wheel equipped with disc-cutters against the tunnel wall. The disc-cutters are the tools that are in direct contact with the hard rock and are therefore exposed to extensive wear and needs to be replaced on a regular basis.The purpose of this Master Thesis has been to develop a service equipment that will enable time effective and safe changes of disc-cutters. The disc-cutters have a diameter of 17 inches and weigh about 130 kg.

The retrospective part of this study evaluates the susceptibility patterns of bacteria isolated from blood in critically ill foals in Sweden. The most commonly obtained bacteria were Actinobacillus spp. (38 %) and Escherichia coli (27 %). Trimethoprim-sulphonamide (TMS) had good efficacy against most gram negative bacteria with the exception of Klebsiella spp. Among 17 Escherichia coli isolates 94 % were susceptible to trimethoprim-sulphonamide whereas all 24 isolates of Actinobacillus spp.

Bipolar disorder is a severe, affective illness which causes a person to alternate between episodes of pathologically elevated mood (mania) and depression ? in between these episodes the mood is normal. The length and intervals between the episodes are highly variable among the ill, as are the severity which is divided into two major subgroups: bipolar I and II. Bipolar I disorder is the most severe because of the patient?s inability to realize that he or she is currently in a manic phase, in the case of bipolar II disorder, the patient is aware that he or she has an abnormally raised mood, a state which is called hypomanic state instead of manic.

As a consequence of increasing wind power installations in the Nordic grid the last years, the need for regulating power has become larger. In the Nordic grid, regulating power is mainly provided by hydro power. One part of the regulating power is called frequency control, which ensures that the grid frequency is stable and close to 50 Hz.However, setting the turbine into frequency controlled operation may cause stress and wear of the components in the mechanical control system. Frequency controlling implies large and frequent servo forces and longer travelling distance of the sliding bearings in the Kaplan turbine.Based on one selected Kaplan turbine, Selsfors G1, measurements and MATLAB calculations have been performed in order to determine forces and movements of the linkage system. With these forces and movements as input, stresses and fatigue have been determined as well as sliding distances, bearing pressures and wear of bearings during a typical lifetime of 40 years.The results indicate that no severe wear exists on the bearings during 40 years of service.

This bachelor thesis project has been executed at Outotec Sweden AB in Skellefteå. Outotecs main business focus is selling mineral and metal processing technologies. A rest product from the metal process is particle-polluted gas and cyclone designs are today the most commonly used abatement device for particle control. A cyclone provides a simple design with high efficiency particle percolation by using air streams.The purpose of this work is to reduce the time it takes create new cyclone designs in Outotecs projects. An extensive construction work is needed for every new cyclone order due to new designs.

För att främja landsbygdens utveckling och till följd av förändringar i markpolitiken tilläts genom lag bildandet av stora bostadsfastigheter på landsbygden 1990. Detta skulle ske genom att öka den enskildes möjlighet att utforma sin fastighet efter egna önskemål. Glesbygd, som är landsbygd karaktäriserad av gles befolkning, är mer utsatt för de problem som landsbygden står inför. Syftet med studien är att undersöka om det finns eller borde finnas en skillnad mellan lands- och glesbygden vid fastighetsbildning av stora bostadsfastigheter. Studien utförs genom en genomgång av rättskällor, tolkning av rättsfall och analys av Lantmäteriets praxis.

Volvo Cars in Skövde manufacture and assemble Volvo engines. When attaching the ignition coil to all 4-cylinder engines, a special mounting tool is required. This mounting tool is currently manufactured from injection-molded polyoxymethylene (POM), a thermoplastic. It has been noted that the life span of the tool is shortened as a result of abrasive wear that occurs during the attachment process of the ignition coil.An investigation of the possibility of manufacturing the mounting tool with a 3D-printer is undertaken in cooperation with ÅF, a consultant to Volvo Cars. A literature study is first presented to introduce broader knowledge on the subject.

In Sweden, harvesting pre-commercial thinning (PCT) stems for energy purposes is a interesting way of financing the high cost of preparing dense stands for a profitable first conventional thinning. This concept can be labelled bioenergy thinning. The aim of this study was to quantify the productivity of a Vimek 404R light harvester with an accumulating Naarva-Grip cutting head during the bioenergy thinning of a self-regenerated stand west of Sunnansjö in Dalarna. The stand was birch-dominated, contained 15 371 stems/ha, and measured on average 4,6 cm Dbh and 7 m tall. Even though the driver was well experienced with the machine, the stand in question was the first one that he ever thinned in this manner. Nevertheless, the driver strived to accumulate as many stems as possible during each crane cycle and chose to cut taller stems in half so as to make the handling and forwarding of the harvested stems easier.