Increased understanding of the mechanisms that operate in conjunction with the welding of metal surfaces may help to improve existing manufacturing processes, and to enable new products and combinations of materials. The purpose of the project has therefore been to acquire a deeper understanding of what is happening in the bond for steel and for the factors that form the basis for a bond to develop between metals in the production of laminates by pressing. The merge has been done by pressing and the surfaces after the experiments have been studied in detail in the scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDX) and with interferenceprofilometry in Wyko, to provide a greater understanding of the mechanisms that influence the bonding in the interface between metals. The project was limited to contain the materials Docol 1000, HyTens 1200, Aluminum AA3003 and a commercial steel. The parameters varied in the experiments to study their influence closer are temperature, pressure, heat treatment and pretreatment. This has been implemented by pressing with varying temperature and pressure.

The purpose of this paper has been to find out what motives buyers of forest property has for there purchasse, what competence they have in economics and forestry, and what analysis they had done before the purchase. The study is based on interviews with nine different buyers from two geographical areas, five from Hälsingland and four from Småland/Skåne. A forest property is a property where the value to 100 % consist of forest. A part from the interviews every purhase has been analysed in comparison to an estimation of the yield value. The theoretical yield value was estimated with a computer programme.

Att vara aktiv och klara av att utföra sitt arbete har en central betydelse för en individs hälsa och välbefinnande. Begreppet arbetsförmåga är ett komplext begrepp som beskrivs som flerdimensionellt. Vid bedömning av arbetsförmåga är det viktigt att bedömaren använder sig av tillförlitliga metoder som syftar till att hjälpa individen med sin fortsatta rehabilitering. Syftet med studien är att kartlägga olika bedömningsinstrument som mäter arbetsförmåga i olika avseenden. Bland annat vilket syfte instrumentet har, vilken datainsamlingsmetod instrumentet använder samt vilka psykometriska egenskaper som har prövats för instrumentet.

The Swedish public procurement correspond to approximately 400 milliard Swedish crowns every year which corresponds to about a fourth of the Swedish Gross National Product. Setting proper demands in the procurement is a useful tool to drive the development towards more environmentally adapted products and provisions. The Act on Public Procurement (Lagen om offentlig upphandling, 1992:1528) gives the municipalities opportunities to consider environmental properties during the procurement. This combined literature and empirical study investigates the experiences made by the three municipalities Ludvika, Borlänge and Smedjebacken during the process of certifying their school kitchens as organic in cooperation with KRAV. The main conclusion is that without compassion and curiosity for developing a green public procurement changes can be hard to implement.

The surface finishing technique called black oxidation is currently being used on thetool holders made of low alloyed tool steel produced by Sandvik Coromant. Blackoxidation isn?t considered a sufficient technique because it doesn?t make the toolholders look like the quality products that they actually are. The reasoning behind thisis that the tool holders can show signs of corrosion after prolonged storing times orin countries with high humidity and temperature. The corrosion doesn?t decrease thetool holders performance, but the customers might believe otherwise.

This report deals with handling and interim storage of soils which are planned tobe reused in construction works. The types of soils that are dealt with are gravel, topsoil and sand. The thesis work has been carried out in collaboration with Skanska Sverige Väg och Anläggning Sydost. The main goal is to find an area for using to store soil in between projects.Studies of laws and regulations regarding exploitation and storage of soil has led to a theoretical background upon which the report is based. Background informationhas also been gathered in meetings with the employees at Tekniska Kontoret and Länsstyrelsen in Jönköping.On the basis of literature studies results, a general template has been developed for which desirable properties a possible location should meet.The model was applied to find a number of possible options in the vicinity of Jönköping.

This project has as main goal to study the influence of the coating thickness, deposited by arc-PVD- technology, on the wear resistance of coated cemented carbide inserts in three different turning operations. An additional effort has also been made to develop a new test method for evaluating flank wear resistance. Three different coating types (Coating A, Coating B and Coating C) have been studied in three distinctive thicknesses (2, 4 and 6 µm) for each type. For two of the coating types (Coating A and B) special studies has been done with the thickest coating, creating two additional coating versions of the thickest coating, by changing various deposition parameters, with the aim to enhance the cohesive properties of the coating and lower the residual stresses at the cutting edge. The results show increased crater wear resistance with increased coating thickness for all coating types, but the amount of increase changes with coating type (Coating A>B>C).

Wetlands are important ecosystems and form habitat for both common and threatened species. In Sweden, as well in many other places on earth, there is a lack of wetlands. There is an expressed will to adjust this lack through restoration of wetlands with reduced function and through construction of new wetlands. Follow-ups and evaluations are important steps to optimize these actions. The wetland Vattenparken was constructed 1999 ? 2000 for treatment of surface water.

This study focuses on the use of animals in social work from the perspective of social workers. The purpose of this study is to examine social workers? experiences of animal assisted social work and how social workers view the integration of animals in various fields of social work. The research is based on a qualitative method and four semi-structured interviews were conducted with social workers. The theories incorporated in the study are Attachment Theory and Sense of Coherence (SOC).The following results are presented: Social workers are considered to have a more comprehensive understanding of clients compared to their associates who do not hold a degree in Social Work.

I både kvalitets- och kontrollarbete finns det behov att kunskapsmässigt komma så nära verkligheten som möjligt vid fastställande av defektparametrar för oförstörande provning (OFP). Orsaken är att olika acceptanskrav och bedömningsgränser är svåra att klarlägga när man inte kan förlita sig på att uppgifter är realistiska. I projektet har olika erfarenheter använts för att få en bättre helhetsbild i området för defektparametrar och oförstörande provning.Denna rapport redovisar den inledande delen av forskning och utvecklingsprojektet PLANT 2, där olika defektparametrar kartlagts och en teoretisk bedömning utförts med avseende på hur signalsvaret påverkas för OFP-metoderna virvelström (ET) och ultraljudsprovning (UT) i form av puls-eko (PE) och ?time-of-flight-diffraction? (TOFD).Definitionen av redovisade defektparametrar följer i stort SKI-rapport 95:70 [1]. Defektparametrar i denna rapport redovisas i bilaga 1.Vid bedömningen av defektparametrarnas inverkan på OFP-tekniker, har drift¬inducerande defekter och tillverkningsdefekter hanterats separat.

I både kvalitets- och kontrollarbete finns det behov att kunskapsmässigt komma så nära verkligheten som möjligt vid fastställande av defektparametrar för oförstörande provning (OFP). Orsaken är att olika acceptanskrav och bedömningsgränser är svåra att klarlägga när man inte kan förlita sig på att uppgifter är realistiska. I projektet har olika erfarenheter använts för att få en bättre helhetsbild i området för defektparametrar och oförstörande provning.Denna rapport redovisar den inledande delen av forskning och utvecklingsprojektet PLANT 2, där olika defektparametrar kartlagts och en teoretisk bedömning utförts med avseende på hur signalsvaret påverkas för OFP-metoderna virvelström (ET) och ultraljudsprovning (UT) i form av puls-eko (PE) och ?time-of-flight-diffraction? (TOFD).Definitionen av redovisade defektparametrar följer i stort SKI-rapport 95:70 [1]. Defektparametrar i denna rapport redovisas i bilaga 1.Vid bedömningen av defektparametrarnas inverkan på OFP-tekniker, har drift¬inducerande defekter och tillverkningsdefekter hanterats separat.

Background: Energy drinks have been found in everyday-stores since 1997 and their popularity have increased over time. Consumtion of energy drinks takes place because of their ability to increase concentration and to decrease fatigue but also because of the popularity the drinks have got. Target groups for these stimulating beverages are adolescents and young adults. Energy drinks contain caffeine, taurine, glucuronolacton, carbohydrates and B-vitamins and voices have been raised about the eligibility for young people to ingest large quantities of these kinds of substances. Because of the properties of these substances it has become popular to mix energy drinks and alcoholic beverages to make up for the negative effects of alcohol and to be able to drink larger quantaties.Aim: The aim of this literature work was to investigate cognitive effects of the combination of caffeine in terms of energy drinks and alcohol and to determine if these effects could be harmful.Method: This literature work is based on five scientific articles retrieved from PubMed.

This thesis applies to a novel steam expander, one part of a steam engine system, a wobble plateengine. The piston in the expander moves axially with the outgoing rotating shaft and is locatedon a plate, why the engine type is called axial engine. When steam is applied to the plungers theplate wobbles creating a rotation on the shaft going thru the wobble plate. The steam expander issupposed to be used in exhaust gas recovery (bottoming cycle) applications and small scaleenergy production. The commissioner is Ranotor Utveckling AB.

Uganda has the largest pig population in east Africa, and most of the animals are owned by smallholders. Infectious diseases among pigs have a devastating impact on the livelihood of these farmers, which are dependent on the proceeds from pig rearing. In a metagenomics study of the wild pig species bushpig (Potamochoerus larvatus), the porcine viruses Torque teno sus virus (TTSuV) 1and 2 and Porcine parvovirus 4 (PPV4) were detected. TTSuV1 and 2 are ubiquitous in the world?s swine population, and PPV4 has been found in USA and China, but neither of them has been studied in Africa previously.

AbstractThis is a thesis done in cooperation with the firm Somas and University of Karlstad. The project is an independent final examination part of the program in Innovation and DesignEngineering comprising 22.5 points, and performed by Mia Myrén Zreloff during spring term 2012. In parallel and collaboration, Fredrik Kjellin performs a similar job for the same company and with the same extent, but for the Program in Mechanical Engineering.The client and supervisor at the company have been Magnus Jansson and Anders Josefsson. At Karlstad University has technical supervisor been Hans Johansson, and in the design- and development process it was Monica Jakobsson. Examiner has been Fredrik Thuvander, professor in the Faculty of Technology and Science at Karlstad University.The mission has been to make a basis work for the company's own development and make a computational model to calculate, visualize and implement materials and other solutions in the manufacture of the company's ball valves.The project has undergone three major phases that included thorough study of the company, production, the problem and product.