The purpose of this thesis is to investigate if vacuum insulation panels are a competitive alternative to traditional insulation.Vacuum insulation has been used as insulation in buildings in Germany and Switzerland for a few years. In Sweden the high-performance insulation material is mainly used in refrigerators, freezers and vacuum thermoses. The development is proceeding well and vacuum insulation is becoming more common in the construction industry. Since it is a relatively unexplored material on the market there are many flaws and problems with the material.The questions we have chosen to answer in this report include an increased knowledge of vacuum insulation, various problems that may arise when handling/installation and the pros and cons of vacuum insulation compared to standard traditional insulation.The methods we have chosen to use in this report is a literature study, interviews with various suppliers and manufactures and calculations to show the differences between traditional and vacuum insulation. Vacuum insulation is 5-10 times better insulation than standard traditional mineral wool insulation, mainly at the beginning of its lifetime.Vacuum insulation panels (VIP) have a service life of approximately 50 years, whereas traditional insulation has a service life of approximately 100 years.

AbstractThe urgency to find alternative fabrics to conventionally produced cotton is increasing as vast amounts of agrochemicals are used and a lot of irrigation is required. In this literature survey the potential of organic cultivation practices to produce highly qualitative hemp fibre, suitable for the textile industry, was investigated. The definition of a fibre in the textile context as well as of the qualities that are essential for a textile fibre was necessary as a base for the discussion in this thesis. The quality parameters looked at were fineness, strength, length, friction, and colour. The impact of external growth factors and plant development on these quality properties are discussed.

To make it easier for forestry planning the forest owners needs data which describe characteristics of the forest. Such data you usually get from some type of inventory. A relatively new technology which probably is getting more important in the future, is laser scanning because of lower costs. But because the laser technology is relatively new you need to compare it with conventional inventory technologies to get better understanding of the possibilities the laser technology gives. This work intends to estimate field measured characteristics of the forest from laser data with help of regression analysis and then see which of the field measured properties that best could be estimated and which laser variables that gave the best results. This study shows that heights has the best estimates, but biomass, diameter and volume also gives good estimates.

ABB I-R Waterjet Systems combines the robotics and motion expertise of ABB Flexible Automation with high-pressure intensifier/pumping technology from Ingersoll-Rand to provide and continue to develop innovative waterjet cutting systems for global markets. The purpose of this assignment is to develop a process water purifier. The purifier should be applicable as an option to ABB I-R?s production cell Cutting-Box. At first hand the process water should be purified well enough to let out in the municipal sewage system, but the ultimate solution is purifying the process water to the range that recycling is possible. When investigating the different principle of purifying water, a research of different products and their manufactories was done. These different products were compared and the principle of filtration was the most applicable, as most of the products were designed for far larger applications. As the process water contains quite large amount of particles, it is necessary to perform the filtration in different steps. The process water purifier is therefore composed of a module of coarse filtration and one of micro filtration. In the module of coarse filtration the mainly amount of fibres and particles are eliminated. They are kept back in the container unit with the larger fragments and dumped with these when the container is emptied. In the module of micro filtration the filtration is performed in two steps. In the first step particles larger than 50?m are eliminated, in the second step the micro filter is setting the range of purifying, in this case 10?m.

Examensarbetet gick ut på att stötprova ett system för upphängning av kablar och rör i fartyg. Vid stötprovningen monterades upphängningssystemet i en fixtur. Gruppen fick fria händer att utforma fixturen. Med hjälp av Fredy Olssons teorier om produktframtagning utvecklades en fixtur bestående av fyrkantrör. Genom att värdera och selektera bland de lösningar som presenterades i examensarbetet ?Upphängningssystem? BTH-IMA-EX?2000/C-02-SE och andra nytillkomna likvärdiga lösningar, har gruppen kommit fram till och stötprovat ett system, bestående av aluminiumprofiler och vinklar från Bosch Rexroth.

Background: The hurricane in the south of Sweden in January 2005 was the worst storm in Sweden for the last hundred years. The storm named Gudrun has blown down forest that according to estimation is corresponding to one year of cutting down in the entire country.Purpose: The purpose of this thesis is to describe how credit granters act when facing falling forest real estate mortgage and describe if they will make considerations due to the storm in the south of Sweden 2005.Method: With help of a qualitative method, we investigated how the credit granters act when facing falling forest real estate mortgage. Interviews were obtained with three credit granters, SEB, Landshypotek and FöreningsSparbanken in the county of Jönköping and Kronoberg.Conclusion: The conclusion is based upon the empirical study, the analysis and our own reflections and it shows that the credit granters do not change their policy concerning credit granting to forest real estate properties. The policy of the credit granters has proven to be valid even in this extreme situation..

The increasing complexity in the development of a configurable real-time system has emerged new principles of software techniques, such as aspect-oriented software development and component-based software development. These techniques allow encapsulation of the system's crosscutting concerns and increase the modularity of the software. The properties of a component that influences the systems performance or semantics are specified separately in entities called aspects, while basic functionality of the property still remains in the component. When building a real-time system, different sets of configurations of aspects and components can be combined, resulting in different configurations of the system. The temporal behavior of the system changes and a way to ensure the predictability of the system is needed.

Rabbits carry a high risk of anesthesia related death. This study was part of a project to develop a form of total intravenous anesthesia (TIVA) with minimal effects on cardiac, respiratory and metabolic parameters. In the study, TIVA with sufentanil and midazolam (group TIVA, n=9) was compared with inhalation anesthesia with sevoflurane (group SEVO, n=9) in female rabbits undergoing surgery (ovariehysterectomi). All rabbits were pre-medicated with medetomidin and carprofen before anesthesia induction. Anesthesia was induced with TIVA (2.3 ?g/ ml sufentanil, 0.45 mg/ ml midazolam) at a rate of 4 ml/ kg/ h and the mean induction dose was 0.4 ?g/ kg of sufentanil and 0.1mg/ kg of midazolam.

Early extubation of cardiac surgery patients has become increasingly important. The assessment of the patient before an early extubation is crucial and the intensive care nurses (ICU nurses) in this estimation is there for very important.The aim of this study was to examine critical care nurses' knowledge of early extubation, and what view ICU nurse has about factors that affect the time to extubation of cardiac surgery patients.A quantitative approach with descriptive and comparative design was used. Selection was all ICU nurses at a thoracic intensive care unit who were clinically active in patient care.The study showed that ICU nurses had good knowledge of why an early extubation was essential. However, the knowledge about the unit?s extubation criteria was low.

This report investigates the possibility to use non-petroleum based adhesive (biobitumen) in asphalt. The main reasons for replacing bitumen are the fact that oil prices are rising, the threat of peak oil and the fact that the asphalt industry is becoming more environmentally friendly.The main purpose of this report is to investigate whether there are any non-petroleum based adhesives on the market. If so, how can they be used? The questions covered are:? Are there any other alternative asphalt coatings available?? Can bio-oils be used in asphalt?? If the bio-oils can be used, what are the details their properties?? How does a cold climate affect the bio binders?? What is the Swedish asphalt industry?s opinion about bio asphalt?The project was concluded through literature studies, consultations with people in the asphalt industry and through several interviews.The conclusion of this report is that there are some existing non-petroleum based adhesives on the market. They are mainly used for bike paths, sidewalks and parkareas.

Idag är antibiotikaresistens ett allvarligt problem. En tillfällig lösning på problemet är att utnyttja synergieffekter som kan uppstå mellan olika typer av antibiotika. Det innebär att antibiotika skulle kunna ha effekt mot bakterier som har utvecklat resistens.I denna rapport har flera olika metoder, för att mäta bakterietillväxt, utvärderats. Dessa metoder indikerar om antibiotikakombinationerna har en effekt. Däribland har både kommersiella och nyligen publicerade metoder undersökts.

For centuries, springs have played a significant role in our society as water supplies, reasons for where to settle down, and in folklore. There are different reasons why and where a spring forms, e.g. in what kind of soil it has its outflow. Geographic and geochemical surroundings have an influence on spring-water quality.For this project some of the springs in the Lagga perish, Knivsta municipality, Sweden, were selected for a closer study. Water samples were collected from springs for analysis.

Det finns flera olika sätt att konkurrera med en balpress på marknaden. Ett av dessa är att minska cykeltiden för en komplett pressoperation. Härav formulerades en problemställning som lade grunden för examensarbetet. Problemställningen löd ?Metod och anordning för åstadkommande av stegrande presskraft i balpress, Nättraby Verktyg AB.? Sambandet mellan minskad cykeltid och stegrande presskraft gav lösningen med varierande hastighet på pressplattan. För att lösa problemet valdes en frekvensomriktare som omriktar matningsfrekvensen till elmotorn.

Electrolux Laundry Systems is the world leader in manufacturing professional laundry equipment.The machines are used in the hotel sector, elderly care, in multifamily houses, laundry bars, and incommercial and institutional laundries.If there is oil or grease left in the clothes after washing may the heat from the dryer cause a chemicalreaction. This reaction may, under certain circumstances cause a fire inside the drum. Competitors toElectrolux has developed its own systems that extinguishes fire inside a tumble dryer and customershave expressed desire to purchase a fire-extinguishing system. Therefore, the project team receivedthe task by Electrolux to develop a fire-extinguishing system that extinguishes a fire in a tumbledryer.The purpose of the project has been to develop a system that both detects and responds to fire in anindustrial tumble dryer to meet the competitors and to satisfy customers' requirements.The goal was to develop a fire-extinguishing system for Electrolux Laundry Systems and develop afully functioning prototype.The project began with information searches on a variety of methods to both detect and extinguish afire. Subsequently, a number of different methods were used to develop a final solution and make aprototype.The result of the project is a fire-extinguishing system that extinguishes a fire inside a dryer.

This report describes the work of developing a specification of requirements for Waste Heat Recovery Units. The main part of the paper describes how the work with the specification of requirements has been performed. One specific question to be answered is:What are the customer?s demands in case of properties for the Waste Heat Recovery Units and how is that information collected as an order documentation to suit the business area Oil & Gas?The report begins with a description of the assignment and continues with the aim and background. A theoretical part describes the different areas and methods that have been important during the process.