Organic Light Emitting Displays (OLEDs) are a new type of thin emissive displays predicted to possess superior properties to existing techniques e.g. Liquid Crystal Display (LCD). The main advantages are low power consumption and a thin display structure. This report contains an explanation of the emissive OLED technology, its functionality and the physics of the organic layer structure in an OLED. The technology is described with respect to the two classes of organic materials used in displays, small molecules and conjugated polymers.

Arvika Smide is a supplier to the automotive industry with a focus on advanced drop forgings including powertrain and bearings. The great experience and high quality is Arvika Smide?s speciality. Today's competition in the industries puts high demands on the efficiency where each company has a quest for perfection.Arvika Smide has been through the thesis of Karlstad University, called for a situation analysis of aftertreatment whose effectiveness has not been fully desirable. The department includes the production steps blasting, quality control and packaging.The thesis contains the results from the situation analysis and comparisons of the calculations for selected reference period Q4 2009th.

This report presents an independent thesis corresponding 15hp and was carried out on Högskolan in Halmstad during the spring of 2014. The thesis is the final course which ends a three-year mechanical engineering program with focus on technical design.The thesis started in an operation which electricians are exposed to every day. The operation in question is cable laying or wiring. The tool they use is called a tension spring and is a long and stiff wire, usually made out of nylon or fiberglass. The tension spring is fed through pipes in the walls and brings the desired cables with it on the way back.

The aim of this paper is to make a plan for local treatment with Klucel® G of a book with moulddamage. The biggest problem concerned handling the book without loosing fragments and tohandle pages that were stuck together. In some places as many as six pages where stuck togetherand it was not possible to separate them without loosing material or breaking them. The otherproblem concerned the use of waterbased adhesives that might cause tidelines and paperdistortions as seen in another volume. The use of Klucel® G dissolved in ethylalcohol functionedvery well as strengtheners and also as an adhesive for lamination.

System Andersson AB is a company located in Jönköping that works with developing computer systems for the mechanical engineering industry. As of today, when this report is written, the company is working on the development of a new Manufacturing Planning and Control (MPC) system. This new system aims to create not only a user friendly interface but also a modern, stylish interface. To achieve this, the company has decided to work with a, for them, new application framework; Windows Presentation Foundation (WPF).System Andersson is well known for developing systems for different kinds of touch screens, this project is no exception. For this new user interface the company wishes to implement different types of Drag&Drop functionality.

Tree fiber lengths controls properties like strength and smoothness in paper and other wood products. For forest researchers it is of interest to be able to determine the fiber lengths in standing trees. Mo?rling et al. (2003), among others, have developed methods to estimate fiber length distributions in standing trees without damaging them.

For a long period of time there have been discussions about the need to modernize, to keep up with the changes in our society. The schools as a result have to keep up and adapt in order for the education to be up-to-date. This includes the technological developments. Many steps have been taken and mighty sums have been invested in order to keep up the pace ? but are there any consequences from these kinds of investments? In this report I?m going to take a closer look on a recent addition to this phenomenon that were installed by means of a top-down approach and study the teachers and how they have adapted and view the change in their environment ? namely the newly installed interactive writing-boards.The questions I will study include how the teachers express their view about the installation of the interactive writing-boards.

Increasing attention is being given to acid sulphate soils wherever they occur. The problems that leaching sulphate soils gives with significant lowerings of pH and mobilization of heavy metals influence large spectra of our society from fisheries to agriculture to construction. Mapping these soils is consequently of great importance and the methods of doing this is very much lacking in function and precision. This study was therefore carried out to investigate whether conductivity in running water can be used as a simple instrument to identify acid sulphate soils in the catchment. 31 coastal streams in the county of Västerbotten were analyzed for different catchment properties such as occurence of marine sediments and basic water chemistry including conductivity and sulphate.

Conditions for Swedish forestry are expected to change in the future due to the climate. Among other things, increased production is expected in a warmer climate, mainly because of a longer growing season. With the changing climate risk of damage by such as insects, fungi and storms are expected to increase. Hence, it is of highest importance for private forest owners to spread these risks in the way they cultivate their forest. In this study a qualitative method was used to examine ten private forest owners with forest properties within Kronoberg county, Sweden in their attitudes and actions to prepare in terms of climate change and if they have been affected by the climate change debate in their forest decisions.

This report shows the process of the development of a sensor module for the seed drills of Väderstad Verken AB. The module is supposed to replace existing solutions, provided that it is better from both a constructional- and an economical aspect. The purpose of the sensor is to continuously give the driver information about the level of height of the front- and drilling tools and the main purpose of the sensor is to allow the seeds to be placed at the desired depth. The sensors which have been taken into consideration have all been of an analogue type and have a protection class of minimum IP67.The methods applied have been taken from the book ?The Mechanical Design Process? by David G.

In cooperation with the Gislaved company Lerocon AB [1], a separation module wasdesigned as a further supplement to the Module System. The aim of theprojectimplementation was that the separation module could be flexible enough to feed themetal pieces, screws, nuts and other items with large variations of size, appearance andmaterial composition. The module should also be cost effective to manufacture.A separation module is a design which is ment to streamline the work in industries withautomation of the lineoperations. The module feeds the details such as screws, nuts, washersand pieces of metal in a continuous flow in which traps separate the details from each other.Traps may vary depending on the purpose and of the details that are fed. Perhaps it isimportant for the user that the detail-orientation is right after the separation module, whichmeans that all the pieces witch aren´t are fed back in return.For companies and industries in lineoperations that can be made more efficient withautomation, are production flow an important watchword.

Previous research analyzing information and communication effects regarding high-involvement purchases has so far concerned communication length and the use of salient attributes. Studies investigating the effects of communication on a word-level is however limited. For a high-involvement purchase like an apartment the need for information is vital in the customers purchase decision. The main purpose of this study is to investigate whether the communication in the prospectus varies based on sales success. The study connects research in information search, high-involvement purchases, communication length and information vividness.

Compressed air is an energy source that is widely used in today's trucks and buses.Compressor located next to the engine supplies the pneumatic system with the compressed air and is lubricated with the engine oil. Some of the oil follows the air flow in both liquid and solid phase. The solid phase, namely the carbon particles are created due to the high temperature in the compression chamber.Oil- and particles carryover softens and destroys the rubber material in the air valves and disturbs the mechanical function of various components in the pneumatic system. In order to reduce oil- and particles carryover is an Air Processing System (APS) set downstream the compressor.No method for establishment of oil- and particles carryover from the compressor exists at the moment. Therefore the filtration efficiency of APS is currently unknown.

Pulsatilla vernalis is one of several endangered plant species that benefit from wildfires and small scale disturbance events that repel competing vegetation and create open patches in the vegetation cover. Previous studies argue that Pulsatilla vernalis is decreasing in numbers due to vegetation changes associated with the decrease in wildfires, forest grazing and changes in forest management. In this study, 17 populations of P. vernalis were inventoried in order to examine if soil and/or vegetation structures affect the population structure of P. vernalis (i.e.

In this project the task has been to develop a product that will facilitate an operation for personnel working in a sterilization center. The operation is to steer the front of a loading trolley into the chamber of an autoclave, a so-called docking. The moment is complicated because the margins to deviate from ideal docking position and still succeed, is very small.The principal Getinge's desire was that the product could be retrofitted at the customers on their existing systems. One of the demands was that the product should fit two types of trolleys, one with a adjustable working height and one with a fixed working height. Getinge is supposed to purchase the system from a subcontractor who shall manufacture it and the requirement from Getinge is that the cost of purchase mustn't exceed SEK 500Initially principles, solving the problem was developed.