This report describes the planning and the accomplishment of the final diploma workat the study program Mechanical Engineering, Department of Engineering Sciences, Uppsala University. Two students carried out the diploma work at GE HealthcareHusbyborg in Uppsala.The aim of the diploma work was to develop and improve existing processequipment for 11C-radiochemistry in PET. The process equipment was to be dividedinto smaller independent modules to make it more flexible. Part of the existingprocess equipment is an oven that is supposed to perform a specific chemicalreaction. One of the main goals was to study and improve this oven.The work could be divided into three main phases: 1.Present concepts for one module, and interface between different modules.

This thesis compares the impact on disk performance in a GNU/Linux  environmentwith three encryption algorithms: AES,  Serpent and Twofish in three different implementations: DM-crypt, Loop-AES and Truecrypt. For all three algorithms a key length of 256 bits is used.The thesis shows that the least performance impact during data encryption, and thus file writing, is reached by using AES or Twofish encryption implemented in DM-crypt or TrueCrypt. The thesis shows that some data operations with a sufficiently low processor utilization barely affects disk performance at all if encrypted using the optimal implementation and algorithm.It is also discovered that the performance impact during data decryption, or file reading, can be minimized by using the most efficient implementation and algorithm. The best results are met with the AES or Twofish cipher, regardless of implementation.An important conclusion that  is  drawn is that it is hard to determine a superior encryption solution for all purposes. However, by reviewing and examining the collected data from all aspects of disk performance the AES implementation in TrueCrypt is, with small marginals, determined to be the most optimal..

Cloud computing has become a very publicized and popular concept in recent years, both in business literature and research, where data ownership is the security aspect which has usually been ranked the highest of the disadvantages that can be identified with cloud services. Today there is a lack of research on information ownership from an informatics perspective, as it is most often discussed from a legal perspective.In our study we interviewed six different companies that use cloud services, on which attitudes and reasoning they had on their information ownership. We compared these attitudes with the attitudes we identified in business literature and research on the subject. In business literature we found four recurring themes which were very clear about how a company should govern information ownership.Overall the results of our interviews showed that there is widespread ignorance at the companies on how information ownership in the cloud is regulated between the company and the cloud provider. All companies expressed that they had not experienced any change in ownership when they placed their data in the cloud, and they expressed no major concerns about how the ownership was handled.

Denna studie har genomförts med syftet att redogöra för vilka möjligheter och hinder som kan uppstå vid införandet av Big Data-baserade IT-lösningar inom den svenska hälso- och sjukvården. Studien bygger på en explorativ fallstudie med fokus på det svenska projektet 3R- Framtidens vårdinformation. Intervjuer har genomförts med personer som är insatta och kunniga i ämnet och därför kunnat bidra med en sammanfattad bild av vilka initiativ och ambitioner som finns i dagsläget. Studiens resultat visar att Big Data kan bidra med en mängd möjligheter till förbättrad sjukvård i Sverige. Resultatet visar på att möjligheten med att samla all information i en gemensam kärna, bidrar till bland annat förbättrad forskning, en förbättrad relation mellan vårdgivare och patienter, möjlighet att kunna utföra prediktiva analyser samt underlättar arbetet med diagnostisering av sjukdomar.

Digitizing objects and environments from real world has become an important part of creating realistic computer graphics. Through the use of structured lighting and laser time-of-flight measurements the capturing of geometric models is now a common process. The result are visualizations where viewers gain new possibilities for both visual and intellectual experiences. This thesis presents the reconstruction of the Parthenon temple and its environment in Athens, Greece by using a 3D laser-scanning technique. In order to reconstruct a realistic model using 3D scanning techniques there are various phases in which the acquired datasets have to be processed.

Aim: The aim of this thesis is to through a survey, gain information about the tenant owners knowledge concerning their own and the real estate agents rights and obligations, this to elucidate one of the factors we think play a big part in the general publics dissatisfaction about the real estate agents and the negative picture painted of them in media today. By throwing light on the assumed lack of knowledge in this area we hope to contribute to improve the information communicated to the customers so that they can feel safer when consulting a real estate agent in this matter.Our main question in this thesis is: How much knowledge does tenant owners and tenant owners to be have concerning the division of responsibilities when it comes to selling and buying a tenant owned flat and what problems can the presumed lack of knowledge in this area lead to?Method: We have used a combination of qualitative and quantitative methods. Data has been collected through a survey which we have put together and analyzed both based on the results we got from the survey but also based on the reactions we received from the participants. The results are presented both in text and in diagrams.Result & Conclusions: The results we got from the survey indicate that the knowledge among our participants is much worse than what would be desired.

Foreign invested SMEs have recently become increasingly interested in China. The enterprises are in this report categorized as second wave companies since they follow the footsteps of previous pioneers, of which mostly were larger companies. The ambitions of the SMEs are either to sell products on the ever expanding Chinese market or to utilize the potential of low cost production for global markets. The existing literature is fragmented and solely based on the experience of larger companies. We believe that SMEs are facing new and different challenges, and thus a new generic theoretical frame work is desirable.

Concept description är en data mining-uppgift som strävar efter en begriplig beskrivning av koncept och klasser, inte exakta prediceringar. Syftet med studien är att visa hur prototypbaserad klustring kan skapa förståelse för en datamängds underliggande domän, enligt concept description. Experiment har utförts med data från pokerdomänen. Datamängden samlades in från ett low-limit, shorthanded bord, hos en av de stora Internetsiterna för online pokerspel. De två experimenten utfördes med samma datamängd, men där uppsättningen attribut skiljde sig åt.

This essay will examine the visitors' view of destination South Djurgården and the impact that tourism provides in them. South Djurgården belongs to Stockholm where the boundary between the southern and northern Djurgården is Djurgårdsbrunnsviken and Djurgårdsbrunnskanalen. The reason we chose South Djurgården is because the biggest and famous attractions of Stockholm are there. In this essay we have used a combination of qualitative and quantitative methods. We conducted the survey through questionnaires and deep interviews.

Today environmental management systems (EMS) are common documents (more correctly, a combination of documents) that direct, steer and regulate environmental efforts within many companies. The intention of EMS is that its guidelines are reflected in how the employee carries out his everyday work tasks. This study aims to illuminate the attitudes that exist regarding the EMS at ALSTOM Power Sweden. By using questionnaires and interviews as a method to communicate with employees,a study of the existing attitudes regarding the EMS was carried out. The results were analyzed categorically and statistically and show that there are consistent attitudes among employees, but that there are also inconsistent attitudes.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

Fördelarna med skogssådd är bland annat att de kan ge stamtäta bestånd med potential att producera träd med bra vedegenskaper och bättre utvecklade rotsystem samt att sådder har en högre biomassaproduktion per ytenhet jämfört med planteringar. Nackdelar som kan nämnas är att de ofta täta förbanden ger ökade kostnader vid eventuella röjningar och att föryngringsresultatet är mera osäkert för sådd än för plantering.Mekaniseringen av skogssådden startade under 1970-talet. Humax och KSM är två kranspetsmonterade aggregat för skogssådd. De har utvecklats för att användas på marker med svår ytstruktur där dragna såddaggregat som harv och högläggare har svårigheter att skapa tillräckligt mycket lämplig såddbädd på grund av att aggregatet inte kommer ner mellan hindren eller att basmaskinen inte klarat av att köra över hela arealen. Fördelen med KSM och Humax är att aggregaten är kranspetsmonterade vilket gör att föraren väljer var aggregatet skall markbereda och på det viset kan markberedningen göras mellan hindren samt att kranarmens räckvidd gör att basmaskinen inte behöver köra över hela arealen som skall markberedas.

The purpose of this paper is to investigate and analyse the private researchers encounter with the Royal Library, national library of Sweden. The main focus is on answering the two questions: who is the private researcher and what is his/her impression of the Royal Library? These questions are answered from the vantage point of the following theoretical perspectives: library anxiety, Bourdieu, library architecture, gender studies and service management. The methods used are qualitative interviews, and textual analysis using the printout of these taped interviews along with notes and an earlier user study as material. The conclusions are that barriers with staff is the most frequent factor of library anxiety in the private researcher at the Royal Library, and mechanical barriers the least frequent.

The aim of this study was to understand how evaluations are implemented and used in procured nursing homes for elderly. Our methodological approach consisted of a single-case study research. The case in this study was Växjö municipality. Three procured nursing homes for elderly were chosen in the municipality as examples of implementation and use of evaluation. The method for retrieving empirical data and the analyzing of it was based on triangulation.

Syftet med examensarbetet har varit att undersöka möjligheterna att utveckla, producera och lansera en ny universell laddare. Målet har varit att kunna ladda så många modeller av så många produkter som möjligt, vilket innefattar mobiltelefoner, kameror, datorer och MP3-spelare etc. Arbetet skulle leda fram till ett förslag på produkt.Genom att undersöka befintliga patent och produkter, har marknaden granskats och slutsatsen är att det finns en uppsjö av universella laddare på marknaden. Dock finns det få produkter som inger säkerhet, möjliggör multipel laddning och som är stationära. Dessa egenskaper blev grundstenar i den kravspecifikation som utarbetades.