In the gaming industry, it has long been popular to combine genres with the aim ofcreating games that bring together the best of several worlds. However, there are stillmany unexplored combinations with good potential.This report addresses the planning and development of a game prototype that combinestwo game genres, turn-based and real-time strategy. In addition to presenting the results,the report also discusses the di culties that were encountered and how they were handled.The prototype contains a working combat system and a basic AI. The prototype ismodular, which means that it is easy for an end user to extend the game with extra content.Most elements that were considered important from the two genres were implemented, butthere is still room for improvement and further development.The result is evaluated by means of quality assurance, a process that is commonly usedin the gaming industry. The response has been generally positive, which indicates thatthe combination has potential and should be explored further..

There are many barriers and obstacles that need to be removed to make the urban environment more accessible for people with disabilities. There are currently no adequate tools for urban planners to assess and address these obstacles. Geographical Information Systems (GIS) provide powerful methods for the visualization and analysis of spatial data, including the kind of data important in studies of accessibility. This study suggests a method urban planners can use to identify accessibility obstacles and to propose future actions to fix them.A literature review was conducted to find out what has been done and what is new regarding the accessibility issues. Different methods were evaluated which in turn led to the construction of a multi-step analytical strategy.

The aim of this project was to quantify the total sleep time in modern dairy cows during24-hour periods and to investigate whether the total amount of sleep as well as timespent in different sleep stages varies between the dry period, early- and peak lactation.The distribution of sleep time between night and day was also examined. Furthermore,correlations between sleep and lying time, fluctuations in body temperature and heartbeat were included in the aim. Eight dairy cows of the Swedish Red breed were used inthis study, which was carried out between June and September 2010. In order toquantify sleep non-invasive electrophysiological recordings were performed.Simultaneously with collecting sleep data, body position and body temperature werealso recorded. No heart rate data was obtained due to difficulties of maintainingelectrodes for heart beat measurements attached to the skin.

This report is a bachelor thesis work within the field of Product Development and is also an assignment for Thule Sweden. The work has been performed by Niclas Tjäderborn and Christian Holm, students at the Mechanical Engineering Program with major in Product Development and Industrial Design at Jönköping School of Engineering during spring the semester of 2009.The thesis work concerned the development of a new wheel holder for bike carrier for Thule Sweden. The background to the project was that the initiator wanted a more user friendly wheel holder with better design than those available on the market. The wheel holder is able to be implemented on one or several of Thule?s current wheel holders.

This paper describes Tempus Custode, a smartphone application with which the user may register working hours and travel time during the work day. The application communicates with a database via a server. The data stored in the database may be manipulated using an administrator tool, mainly for the composition of time reports. In this way, the user?s task of time reporting his day is greatly simplified.The application is able to automatically discriminate between work time and travel time, as it continuously fetches positioning data from the smartphone GPS receiver.

This report is the result of a thesis at the company Sanmina in O?rnsko?ldsvik. The thesis is the final work at the mechanical engineering program at Umea? University.Sanmina has in 2015 launched an initiative to ensure that all sites are using LEAN principles and tools to enhance their business. As part of the plan for the LEAN-work, an LSS (Lean Six Sigma)-project has started to study the company's receivehall and inspection.

This report describes the planning and the accomplishment of the final diploma workat the study program Mechanical Engineering, Department of Engineering Sciences, Uppsala University. Two students carried out the diploma work at GE HealthcareHusbyborg in Uppsala.The aim of the diploma work was to develop and improve existing processequipment for 11C-radiochemistry in PET. The process equipment was to be dividedinto smaller independent modules to make it more flexible. Part of the existingprocess equipment is an oven that is supposed to perform a specific chemicalreaction. One of the main goals was to study and improve this oven.The work could be divided into three main phases: 1.Present concepts for one module, and interface between different modules.

This thesis was performed at Vendig AB which is a company that develops and sells products such as belt scrapers for conveyor. The thesis is divided into two parts, one part where it´s investigated which tension force is required to tighten Vendig AB´s scraper Hampus against the belt in a correct way. The second part is called mechanical design and here a new and more compact tension device is developed.Field studies has been conducted at a couple of Vendig AB´s costumers to get a knowledge base about how Vendig AB´s products are used, how they function and the environment they operate in. During one of the field studies the force between the scraper and the belt was measured. The result from the measurements, together with a report from LKAB [1], were evaluated and summarized in a table.

Vi har byggt ett digitalt musikinstrument, en synthesizer med samplebaserad trummaskin. Synthesizern och trummaskinen är mjukvarubaserad medan gränssnittet är hårdvarubaserat. Operativsystemet som används är Linux och synthesizermjukvaran är utvecklad i ljudprogrammeringsspråket Pure Data. Syftet med denna rapport är att kunna ge utomstående personer en inblick i hur detta arbete har gått till och hur resultatet blev..

The purpose of this thesis is to investigate how students who study with Problem-based learning PBL in a distance learning course perceive the support from the university library. I first went into adult education, PBL and distance studies, one at a time, and then took a look at the combination of problem-based learning in distance studies. During the investigation, I conducted five interviews using a phenomenographic method to understand how the students perceived the support they received from the university library. The university library gives a lot of support but what I noticed while I was writing was that it is difficult to reach the students with the information regarding the help that is available to them. I give some example on how to develop the support and find that the students have a wide range of different needs for support from the library depending on their individual situation, social context, academic ability, location and course of study.

This project was aimed to study the degradation of polystyrene-butadiene-styrene block copolymer (SBS). SBS is used to modify bitumen, the binder in asphalt. From earlier studies it is known that SBS degrades in bitumen, but the degradation products have not been identified. To be able to determine the long term effects of SBS in the environment, degradation products need to be identified. Polystyrene forms rigid blocks with polybutadiene as a rubbery matrix between the ridgid blocks.

Multilayered woodland types are an important part of the urban forest. The knowledge how to establish and maintain such plantations are not as deep as other knowledge fields concerning forestry. Therefore this study has looked upon how to achieve multilayered structures in young nature-like woodland plantations. As a theoretical base for the study three different major knowledge culture have been studied that concerns the subject, ecology, forestry and landscape management/design. This three theoretical framework concludes that many natural processes strive in the opposite direction of multilayered structures in their youth.

Detta examensarbete har utförts på uppdrag av Koenigsegg Automotive AB, som utvecklar, tillverkar och säljer högpresterande sportbilar. Företaget erbjuder fälgar tillverkade helt i kolfiberkomposit, som ger betydande viktbesparingar i jämförelse med traditionella metallfälgar.Efter tillverkningen kräver fälgarna viss bearbetning vid anläggningsytan mellan fälg och däck. Syftet med examensarbetet har varit att undersöka möjligheten att utföra bearbetningen av fälgarna in-house i Ängelholm, och målet har varit att konstruera en maskin för detta ändamål.Projektet inleddes med en litteratursökning, där svårigheter och möjligheter gällande bearbetning av kolfiberkompositer undersöktes. Till följd av de undersökningar som gjordes, valdes bearbetningsmetoden svarvfräsning och ett antal konstuktionskoncept genererades. Genom ett antal utvärderingar utvecklades ett speciellt koncept vidare till ett komplett produktförslag.Produktförslaget är komplett med analyser, beräkningar samt tillverkningsunderlag, som ger uppdragsgivaren bättre insikt i sina möjligheter.

From policy to practice - a study of textile companies view about challenges with implementing CSR policies examine the textile companies awareness of which challenges there are with the implementation of codes of conduct in a global supply chain, as well as to analyze how the companies deal with the challenges. With increased globalization many companies have chosen to outsource entire or parts of the production in various developing and newly industrialized countries. However, the working conditions in these countries do not always fulfill the labor standards that are defined in various conventions. The society began demanding companies to take social responsibility. The social responsibility goes under the term Corporate social responsibility (CSR).

Recent developments suggest that private and public companies are moving towards a more service-oriented business. Service orientation means that hardware is often sold in packages with service agreements, which makes the investment more difficult to assess. The challenges that arise will be to assess the value of the overall package, the information needed to make informed decisions and the operational requirements in combination of hardware, software, support agreements, training and more. The paper therefore aims to examine how decision makers can evaluate the benefits of these investments and obtain a stronger base to make better decisions. There is within the area of radiology in the region of Västra Götaland a pronounced need for a better flow of information regarding medical equipment and related service agreements.